Wyznaczanie charakterystyk statycznych synchronicznego silnika reluktancyjnego z użyciem metody polowo-obwodowej

• Autorzy: Machlarz R.

Warianty tytułu

EN

Determination of steady state characteristics of axially laminated synchronous reluctance motor using field-circuit method

• Konferencja: Problemy eksploatacji maszyn i napędów elektrycznych (2005; Ustroń, Polska)
• Języki publikacji: PL

Abstrakty

EN

The paper presents a field-circuit approach to determining the steady state performance characteristics of synchronous reluctance motor with magnetic circuit non-linearity taking into account. The method was implemented for the calculation of torque-angle characteristic and main exploitation parameters characteristics of two pole synchronous reluctance motor with axially laminated, anisotropic rotor. For a number of consecutive values of current angle and different excitation levels the direct and quadrature axis current components were calculated. On the basis of radial component of airgap flux density distributions resolved for both axes and each excitation current value, the magnetizing flux linkages in direct and quadrature axes were determined. Calculated flux linkage vs. excitation current functions were stored as a look-up tables. An iterative method of solving a set of non-linear algebraic equations was adopted, with values of flux linkages taken from a look-up table. The curves obtained on the basis of field-circuit model and measured ones were presented together for comparison. The reasons for observed discrepancy between calculated and measured curves were discussed.

Słowa kluczowe

PL

charakterystyka statyczna; silnik reluktancyjny synchroniczny; silniki synchroniczne; metoda polowo-obwodowa

• Wydawca: Sieć Badawcza Łukasiewicz - Górnośląski Instytut Technologiczny
• Czasopismo: Maszyny Elektryczne : zeszyty problemowe
• Rocznik: 2005
• Tom: Nr 72
• Strony: 97--101
• Opis fizyczny: Bibliogr. 4 poz., rys.

Twórcy

autor

Machlarz R.

• Katedra Maszyn Elektrycznych, Politechnika Lubelska, ul. Nadbystrzycka 38a, 20-950 Lublin

Bibliografia

• [1]. Boldea I., Fu Z. X., Nasar S. A., “Performance evaluation of axially-laminated anisotropic (ALA) rotor reluctance synchronous motors”, IEEE Trans. on Ind. Appl., Vol. 30, No. 4, July/August 1994, pp. 977-984.
• [2]. Vagati A., Pastorelli M., Scapino F., Franceschini G., “Impact of cross saturation in synchronous reluctance motors of the transverse-laminated type”, IEEE Trans. on Ind. Appl., Vol. 36, No. 4, July/August 2000, pp. 1039-1045.
• [3]. Haataja J., Pyrhönen J., “Synchronous reluctance motor: an alternative to induction motor”, ICEM 2000, Helsinki, pp. 1762-1766.
• [4]. Miksiewicz R., Jakubiec M., “Polowo-obwodowy model obliczeniowy synchronicznych silników reluktancyjnych”, Zeszyty Problemowe – Maszyny Elektryczne, Nr. 64/2002, BOBRME Komel, pp. 229-234.