Waste plastic materials as a source of petrochemical products

• Autorzy: Liberski A. , Wasiak W. , Jóźwik J. , Urbaniak W. , Fall J.
• Języki publikacji: EN

Abstrakty

EN

Two groups of wastes, such as plastics and the used lubricating oils, can make valuable raw products for obtaining essential components needed for the production of the heating oils and the Diesel oils. This approach to the problems related to the disposal of the above wastes is implied not only by economy and ecology but also by the legal acts currently in force. Taking into regard the fact that in Poland every year about 300 thousand tons of lubricating oils are introduced into exploitation and about million tons of plastics waste are produced, the wastes seem to be an important source of petrochemical raw components. The results of the laboratory study have confirmed the possibility of utilisation of these two groups of wastes in the way proposed.

Słowa kluczowe

EN

waste plastics material; waste lubricating oils; distillation

PL

odpady z tworzyw sztucznych; olej odpadowy; destylacja

• Wydawca: West Pomeranian University of Technology. Publishing House
• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2005
• Tom: Vol. 7, nr 1
• Strony: 38--43
• Opis fizyczny: Bibliogr. 22 poz., tab., rys.

Twórcy

autor

Liberski A.

• Adam Mickiewicz University, Department of Analytical Chemistry, ul. Grunwaldzka 6, 60-780 Poznań

autor

Wasiak W.

• Adam Mickiewicz University, Department of Analytical Chemistry, ul. Grunwaldzka 6, 60-780 Poznań

autor

Jóźwik J.

• Adam Mickiewicz University, Department of Analytical Chemistry, ul. Grunwaldzka 6, 60-780 Poznań

autor

Urbaniak W.

• Adam Mickiewicz University, Department of Analytical Chemistry, ul. Grunwaldzka 6, 60-780 Poznań

autor

Fall J.

• Adam Mickiewicz University, Department of Analytical Chemistry, ul. Grunwaldzka 6, 60-780 Poznań

Bibliografia

• (1) Legal Act On Waste Utilization (27 April 2001) Dz. U. Nr 62, poz. 628.
• (2) Legal Act On Package Materials (11 May 2001), Dz. U. Nr 63, poz. 638.
• (3) Legal Act Law Preservation of Environment (27 April 2001), Dz. U. Nr 62, poz. 627.
• (4) Bhaskar T., Uddin M.A., Murai K., Keneko J., Hamano K., Kusaba T., Muto A., Sakata Y., Compression of thermal degradation products from real municipal waste plastic and model mixed plastic, J. Anal. Appl. Pyrolysis, 2003, 70, 579 - 587.
• (5) Wawrzyniak R., Urbaniak W., Ratajczak R., Wasiak W., Fall J., A Combined distillation of waste petroleum oil with an addition of waste plastics material, Pol. J. Chem. Technol. 2002, 4, 28 - 31.
• (6) Sakata Y., Uddin M.A., Muto A., Narazaki M., Koizum K., Murata K., Kaji M., Spontaneous degradation of municipal waste plastic at low temperature during the dechlorination treatment, Ind. Eng. Chem. Res., 1998, 37, 2889 - 2892
• (7) Wasiak W., Liberski A., Waste lubricating oils, Forum, Poznań, 2004.
• (8) Bhaskar T., Uddin M.A., Muto A., Omura Y., Kimuta K., Kawakami Y., Recycling of waste lubricant oil into chemical feedstock or fuel oil over supported iron oxide catalysts Fuel, 2004, 83, 9 - 15.
• (9) Lingaiah N., Uddin M.A., Muto A., Imai T., Sakata Y. Removal of organic chlorine compounds by catalytic dehydrochlorination for the refinement of municipal waste plastic derived oil, Fuel, 2001, 80, 1902 - 1905.
• (10) Uddin M.A., Sakata Y., Shiraga Y., Muto A., Murat K., Dechlorination of chlorine compounds in poly(vinyl chloride) mixed plastic derived oil by solid sorbents, Ind. Eng. Chem. Res., 1999, 38, 1406 - 1410.
• (11) Shiraga Y., Uddin M.A., Muto A., Narazaki M., Sakata Y., Boiling-point distribution and dechlorination of organic chlorine compounds in oil obtained from the degradation of PVC mixed plastic, Energy & Fuels 1999, 13, 428 - 432.
• (12) Yoon L.W., Park J.S., Jung H., Lee H.T., Lee D., Optimization of pyrolytic coprocessing of waste plastic and waste motor oil into oils using statistical pentagonal experimental design, Fuel, 1999, 78, 809 - 813.
• (13) Koo J.K., Kim S.W., Reaction kinetic model for optimal pyrolysis of plastic waste mixture, Waste Management & Research, 1999, 11, 515 - 529.
• (14) Kim S.S., Kim S., Pyrolysis kinetics of waste automobile lubricant oil. Fuel, 2000, 79, 1943 - 1949.
• (15) Faravelli T., Bozzano G., Colombo M., Ranzi E., Dante M., Kinetic modeling of the thermal degradation of polyethylene and polystyrene mixtures, J. Anal. Appl. Pyrolysis, 2003, 70, 761 - 777.
• (16) Gersten J., Feinberg V., Hetsroni G., Shindler Y., Kinetic study of the thermal decomposition of polypropylene, oil shale and their mixture, Fuel, 2000, 79, 1679 - 1686.
• (17) Kuokkanen T., Peramaki P., Valimaki I., Ronkomaki H., Determination of heavy metals in waste lubricating oils by inductively coupled plasma optical emission spectrometry, J.Environ. Anal. Chem., 2001, 81, 89 - 100.
• (18) Shwarz G., Ecker A., A new efficient method for the characterization of vacuum distillates and lubricating oils, Petroleum and Coal, 1999, 41, 185 - 188.
• (19) Margaroni D., Fuel lubricity, Industrial Lubrication and Tribology 1998, 50, 108 - 118.
• (20) Wasiak W., Urbaniak W., Chojnacka M., Fall J., „Analysis of composition of fuel fractions being result of distillation of waste lubricate oils and waste plastic", in „Fuel from Waste Materials" Eds. Wandrasz W.J. and Pikoń K., vol. IV, 71 - 77, HELION Publishers, Gliwice 2003.
• (21) Gersten J., Fainberg V., Garbar A., Hetsroni G., Shindler Y., Utilization of waste polymers through one-stage low-temperature pyrolysis with oil shale, Fuel, 1999, 78, 987 - 900.
• (22) Ramdoss P.K., Tarrer A.R., High-temperature liquefaction of waste plastics, Fuel, 1998, 77, 293 - 299.