Direct torque control methods for voltage source inverter-fed induction motors - a review

• Autorzy: Buja G. , Kaźmierkowski M.P.

Warianty tytułu

PL

Przegląd metod bezpośredniego sterowania momentu silników klatkowych zasilanych z falowników napięcia

• Języki publikacji: EN

Abstrakty

EN

This paper presents a review of recently used direct torque and flux control (DTC) techniques for voltage source inverter-fed induction motors. A variety of techniques, different in concept, are described as follows: switching table (ST) based hysteresis DTC, direct self control (DSC), constant switching frequency DTC with space vector modulation (DTC-SVM). Also, nowadays trends in the DTC-SVM techniques based on neuro fuzzy logic controllers are presented. Some oscillograms that illustrate properties of the presented techniques are shown.

PL

W artykule przedstawiono przegląd aktualnych metod bezpośredniego sterowania momentu i strumienia (ang. DTC) silników indukcyjnych klatkowych zasilanych z tranzystorowych falowników napięcia. Różne strategie sterowania przedstawiono w następujących grupach: sterowanie DTC bazujące na regulatorach histerezowych i tabeli wyboru optymalnych wektorów (ST-DTC), sterowanie DSC, sterowanie z zachowaniem stałej częstotliwości łączeń dzięki zastosowaniu modulatora wektorowego (DTC-SVM). Przedstawiono również współczesne trendy bazujące na technice neuro fuzzy. Rozważania teoretyczne uzupełniono wybranymi oscylogramami, które ilustrują właściwości omawianych strategii sterowania DTC.

Słowa kluczowe

PL

falowniki napięcia; silniki klatkowe; sterowanie DTC; sterowanie DSC; maszyny asynchroniczne

• Wydawca: Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
• Czasopismo: Prace Instytutu Elektrotechniki
• Rocznik: 2003
• Tom: Z. 218
• Strony: 31--60
• Opis fizyczny: Bibliogr. 75 poz., tab., rys.

Twórcy

autor

Buja G.

• Zakład Elektrycznych Napędów Obrabiarkowych, Instytut Elektrotechniki

autor

Kaźmierkowski M.P.

• Departament of Electric Machine Tool Drives. Electrotechnical Institute

Bibliografia

• 1. Baader U.: "High Dynamie Toraue Control of Induction Motor in stator Flux Oriented Coordinates" (in German), etz Archiv, Vol.11, No 1, pp. 11-17, 1998.
• 2. Baader U., Depenbrock M., Gierse G.: „Direct Self Control (DSC) of lnverter-Fed-Induction Machine- A Basis for Speed Control Without Speed Measuremenf, IEEE Trans. Of Industry Applications, Vol.28, No.3 May/June, pp.581-588, 1992.
• 3. Bertoluzzo M., Buja G., Menis R.: Analytical formulation of the direct control of induction motor drives", in Proc. Of IEEE International Symposium on Industrial Electronics, pp.14-20, 1999.
• 4. Bertoluzzo M., Buja G., Menis R.: „Operation of DFTC IM drives under estimation process errors", in Proc. Of International Conference on Power Electronics and Motion Control, pp.1.27-1.34, 2000.
• 5. Blaschke F.: "The principle of field-orientation as applied to the Transvector closed-loop control system for rotating-field machines", in Simens Reviev 34, pp.217-220, 1972.
• 6. Bodson M., Chiasson J., Novotnak R.: "High performance induction motor control via input-output linearization", IEEE Control Systems, pp.25-33, August 1994.
• 7. Boldea I., Nasar S.A.: "Torque vector control. A class of fast and robust torque, speed and position digital controllers for electric drives", Electromechanical and Power System, Vol,15, pp.135-147, 1988.
• 8. Boldea I., Nasar S.A.: Electric Drives, CRC Press, Boca Raton-Ann Arbor-London-Tokyo, 1999.
• 9. Bonanno F., Consoli A., Raciti A., Testa A.:" An lnnovative Direct Self-Control Scheme for Induction Motor Drives", IEEE Trans. On Power Electronics, vol. PE-12, September, 1997.
• 10. Bose B.K.: Modern Power Electronics and AC Drives, Englewood Cliffs, Prentice-Hall, 2001.
• 11. Buja G., Casadei D., Serra G.: „DTC-Based Strategies for Induction Motor Drives", in Proc.of the IEEE-IECON Conf., Vol.4, pp.1506-1516, 1997.
• 12. Buja G.: "A New Control Strategy of the Induction Motor Drives: The Direct Flux And Torque Contro!', IEEE Industrial Electronics Newsletter, Vol.45, No.4, Dec, pp.14-16, 1998.
• 13. Cabrera L.A., Elbuluk M.E., Zinger D.S.: "Learning Techniques to Train Neural Networks as a State Selector for lnverter-Fed Induction Machines Using Direct Torque Contror, in IEEE Trans. On Power Electronics, Vol.12, no.5, September, pp.788-799,1997.
• 14. Casadei D., Profumo F., Serra G., Tani A.: "FOC and DTC: Two Viable Schemes for Induction Motors Torque Contror, IEEE Trans.on Power Electronics, Vol.17, No.5, pp.779-787, 2002.
• 15. Casadei D., Serra G., Tani A.: „Constant frequency operation of a DTC induction motor drive for electric vehicle", in Proc. Of ICEM Conf., 1996, Vol.3, pp.224-229.
• 16. Casadei D., Serra G., Tani A., Analytical lnvestigation of Torque and Flux Ripple in DTC Schemes for Induction Motors" in Proc. of the IEEE-IECON Conf., 1997, pp.552-556.
• 17. Cascone V., Mantica L, Oberti M.,:"Three level inverter DSC control strategy for traction drives", in Proc. of 5 rd European Conf. On Power Electronics and Applications, Firenze, Vol.1., 1989, pp.135-139.
• 18. Depenbrock M.: "Direct Self Control of lnverter-Fed Induction Machines", IEEE Trans, on Power Electronics, Vol.PE-3, no.4, pp.420-429,Oct.1988.
• 19. Depenbrock M.: "Direct self-control of the flux and rotary moment of a rotary-field machine", U.S. Patent 4, 678, 248.
• 20. "Direct Torque Control-the world's most advanced AC drive technology". Technical Guide, no.1. ABB Finland.
• 21. Grabowski P.Z., Każmierkowski M.P., Bose B.K., Blaabjerg F.:" A Simple Direct-Torque Neuro-Fuzzy Control of PWM-lnverter-Fed Induction Motor Drive", IEEE Trans. On Industrial Electronics, Vol. 47, no.4, pp.863-870,2000.
• 22. Habetler T.G., Divan D.D.: "Control Strategies for Direct Torque Control Using Discrete Pulse Modulation", IEEE Trans. On Industry Applications, Vol.27, no.5, Sept./Oct., pp.893-901, 1991.
• 23. Habetler T.G., Profumo F., Pastorelli M.: "Direct Toraue Control of Induction Machines Over a Wide Speed Rangę", in XXX, pp.600-606,1992.
• 24. Habetler T.G., Profumo F., Pastorelli M., Tolbert L.M.: „Direct Torgue Control of Induction Motor Using Space Vector Modulation", in IEEE Trans. On Indusstry Applications, Vol.28, no.5, Sept./Oct., pp.1045-1053, 1992.
• 25. Hassę K.: "Drehzahlgelverfahren fur schnelle Umkehranthebe mit stromrichtergespeisten Asynchron-KurzchlussIaufer-motoreri", Reglungstechnik, Vol. 20, pp.60-66,1972.
• 26. Hoffman F.: „Drehgeberlose geregelte Induktionmaschinen an IGBT-Puisstromrichtern", Dissertation Ruhr-Universiat Bochum, VDI-Verlag Reihe 21: Elektrotechnik, No .213, DOsseeldorf 1996.
• 27. Hoffman F., Janecke M.: „Fast Torque Control of an IGBT-lnverter-Fed Tree-Phase A.C.Drive in the Whole Speed Range-Experimental ResulC, in Proc.EPE Conf., pp.3.399-3.404, 1995,.
• 28. Idris N.R.N., Yatim A.H.: "Reduced torque ripple and constant torque switching frequency strategy for induction motors", in Rec. of IEEE Applied Power Electronics Conference, pp.154-161, 2000.
• 29. Janecke M.: "D/e Direkte Selbstregelung bei Anwendung im Traktionsbereich", Dissertation Ruhr-Universitat Bochum, VDI-Verlag, Reihe 8: Mess-, Steuerungs- und Regelungstechnik, No.282, Dusseldorf 1991.
• 30. Janecke M., Kremer R., Steuerwald G.: „Direct self-control, a novel method of controlling asynchronous machines in traction applications", in Proc. Of 3rt EPE'89 Conf., Aachen, Vol.1., pp.75-81, 1989,.
• 31. Jonsson R.: "Method and apparatus for controlling an AC induction motor", U.S.Patent 5, 294, 876.
• 32. Jonsson R., Leonhard W.: "Control of an Induction Motor without a Mechanical Sensor, based on the Principle of "Natural Field Orientation" (NFO)", in Proc. Of IPEC Conference, Yokohama, Japan, 1995.
• 33. Każmierkowski M.P., Tunia H.: Automatic Control of Converter Fed Drives, ELSEN/IER Amsterdam-London-New York-Tokyo, 1994.34. Każmierkowski M.P., Orłowska-Kowalska T.: ,ANN Based Estimation and Control in Converter-Fed Motor Drives", In: Soft Computing in Industrial Electronics, Osaka S.J. and Sztandera L. (Eds), Physica Verlag Heidelberg, Germany, pp.45-94.
• 35. Każmierkowski M.P., Kasprowicz A.: „Improwed Direct Torque and Flux Vector Control of PWM lnverter-Fed Induction Motor Drives", in IEEE Trans. Of Industrial Electronics, Vol.42, no.4, pp.344-350, Aug.1995.
• 36. Każmierkowski M.P., Sobczuk D.L.: „Sliding Mode Feedback Linearized Control of PWM lnverter-Fed Induction Motof in Proc.lEEE/IEC'96, Taipei, pp.244-249, 1996.
• 37. Każmierkowski M.P., Krishnan R., Blaabjerg F.: Control in Power Electronics, Academic Press, 2002.
• 38. Koch S.: "Beitrage zur Regelung von Induktionsmachinen ohne Drehgebei", Dissertation Ruhr-Universitat Bochum, VDI-Verlag Reihe 8: Mess-, Steuerungs- und Regelungstechnik, No.717, Dusseldorf 1998.
• 39. Kang J.K., Sul S.K.: „New Direct Torgue Control of Induction Motor for Minimum Torque Ripple and Constant Switching Freguency, IEEE Trans. On Industry Applications, Vol.35, no.5, pp.1076-1082, Sept./Oct. 1999.
• 40. Kang J.K., Sul S.K.: .Analysis and Prediction of lnverter Switching Freguency in Direct Torque Control of Induction Machine Based on Hysteresis Bands and Machine Parameters", IEEE Trans. On Industrial Electronics, Vol.48, no.3, pp.545-553, June 2001.
• 41. Krishnan R., Electric Motor Drives, Prentice Hall, New Jersey,2001.
• 42. Krzemiński Z.: "Nonlinear Control of Induction Motors", in Proc. Of 10m IFAC World Congress, Munich, pp.349-354, 1987.
• 43. Lascu C, Boldea I., Blaabjerg F.: "A modificd direct torque control (DTC) for induction motor sensorless drive", in Conf.Rec.lEEE-IAS, pp.415-422, 1998.
• 44. Lee J.H., Kim C.G., Youn M.J.: "A dead-Beat Type Digital Controller for the Direct Torgue Control of an Induction Motor", IEEE Trans. On Power Electronics, Vol.17, No.5, pp.739-746, 2002.
• 45. Lee B.S., Krishnan R.: "Adaptive stator resistance compensation for high performance direct torgue controlled induction motor drives", In Conf. Rec.lEEE-IAS, 1998, Vol. 1, pp.423-430, 1998.
• 46. Lochot Ch., Roboam X., Maussion P.: "A new direct torgue control strategy for an induction motor with constant switching freguency operation", in Proc.of the EPE Conf., Vol.2, pp.431-436, 1995.
• 47. Nash J.N.: "Direct torgue control, induction motor vector control without an encoder", IEEE Trans. On Industry Applications, Vol.33, n.2, pp.333-341,1997.
• 48. Maes J., Melkebeek J.: „Discrete direct torque control of induction motors using back e.m.f. measurements", in Conf.Rec. of IEEE-IAS Annual Meeting, Vol.1., pp.407-414,1998.
• 49. Maischak D.: "Schnelle Drehmomentregelung im gesamten Drehzahlbereich eines hochausgenutzten Drehfeldantriebes", Dissertation Ruhr-Universitat Bochum, VDI-Verlag Reihe 8: Mess,-Steuerungs-und Regelungstechnik, No. 479, Dusseldorf 1994.
• 50. Marino R.: „Output Feedback Control of Current-Fed Induction motors with Unknown Rotor Resistance", IEEE Trans. On Control Systems Technology, Vol.4, No.4, pp.336-347, July 1996.
• 51. Mir S.A., Zinger D.S., Elbuluk M.E.: „Fuzzy Controller For lnverter Fed Induction Machines", in IEEE Trans. On Industrial Applications, Vol. IA-21, no.4, pp.1009-1015, Jan./Feb.1993.
• 52. Mir S., Elbuluk M.E., Zinger D.S.: "PI and Fuzzy Esłimałors for the Stator Resistance in Direct Torque Control of Induction Motors", in Proc. Of IEEE-PESC Conf., pp.744-751, 1994.
• 53. Mir S.A., Elbuluk M.E.: "Precision Torque Control in lnverter-Fed Induction Machines Using Fuzzy Logic", in Proceedings of the IEEE-PESC Conference, 1995, pp.396-401.
• 54. Mohan N., Advanced Electric Drives, MNPERE, Minneapolis, 2001.
• 55. Mutschler P., Flach E.: "Digital implementation of predictive direct control algorithms for induction motors", in Proc. Of IEEE-IAS Ann. Mtg., 1998, pp.444-451.
• 56. Noguchi T., Yamarnoto M., Kondo S., Takahashi I.: "High Freguency Swithing Operation of PWM lnverter for Direct Torque Control of Induction Motor", in Proc. Of the IEEE-IAS Conf., 1997.
• 57. Ortega R., Loria A., Niclasson P.J., Sira-Ramirez H.: "Passivity-based Control of Euier-Lagrange Systems" Springer Verlag, London,1998.
• 58. Pietrzak-David M., De Fornel B.: „Non-Linear Control with Adaptive Observer for Sensońess Induction Motor Speed Drives", EPE Journal, Vol.11, no.4, pp.7-13, 2001.
• 59. Pohjalainen P., Stulz C: "Method and apparatus for direct torque control of a three-phase machine", U.S. Patent 5, 734, 249.
• 60. Rajashekara K., Kawamura A., Matsue K.: Sensorless Control of AC Motor Drives; IEEE Press, 1996.
• 61. Skrotzki T.: "Die stromrichtergespeiste Induktionmaschine mit Direkter-Selbstregelung im FeldschwSchbereich", Dissertation Ruhr-Universitat Bochum, VDI-Verlag, Reihe 21: Elektrotechnik, Nr.50, Dusseldorf 1989.
• 62. Steimel A., Wiesemann J.: „Further development of Direct Self Control for application in electric traction", in Conf.Rec. IEEE-ISIE'96, pp.180-185, Warsaw 1996.
• 63. Takahashi I., Noguchi T.: "A new quick-response and high efficiency control strategy of an induction machine", IEEE Trans, on Industrial Application, Vol. IA-22, no.5, pp.820-827, Sept./Oct. 1986.
• 64. Taylor D.G.: "Nonlinear Control of Electric Machines: An Overview", IEEE Control Systems, pp.41-51, Dec. 1994.
• 65. Telford D., Dunningan M.W., Wiliams B.W.: "A comparison of vector control and direct torgue control of an induction machinę", in Proc. of IEEE Power Electronics Specialist Conference, pp.421-426, 2000.
• 66. Tiiten P., Pohjalainen P., Lalu J.: "Next generation motion control method: Direct torgue control (DTC)", EPE Journal, vol.5., no.1., march.1995.
• 67. Trzynadlowski M.: Control of Induction Motors, Academic Press,2000.
• 68. Vas P.: Artificial-Intelligence-Based Electrical Machines and Drives, Oxford University Press, New York, 1999.
• 69. Vas P., Sensorles Vector and Direct Torque Control, Clarendon Press, Oxford, 1998.
• 70. Walczyna M.: "On Reduction of Harmonie Reactive Distorsions and Subharmonics of Drives With VSI-Fed Induction Motors Controlled by Direct Torgue and Flux Control Methods", in Conf.Rec. IEEE-PESC Atlanta 1995, pp.408-414.
• 71. Walczyna M., Hill R.J.: „Novel PWM Strategy for Direct Self-Control of lnverter-Fed Induction Motors", in Proc. Of ISIE Connf., Budapest, June, 1993.
• 72. Wang J.K., Chung D.W., Sul S.K.: „Direct torgue control of induction machine with variable amplitude control of induction machine with variable amplitude control of flux and torque.hysteresis bands", in Proc. Of International Conference on Electrical Machines and Drives, pp.640-642, 1999.
• 73. Xia Y., Oghanna W.: „Fuzzy Direct Torgue Control of Induction Motor with Stator Flux Estimation Compensation in Proc. Of the IEEE-IECON Conf., Vol.2, pp.505-510,1997.
• 74. Xue X., Xu X., Habetler T.G., Divan D.M.: "A Iow cost stator flux oriented voltage source variable speed drive", In Conf.Rec. IEEE-IAS,V vol.1, pp.410-415,1990.
• 75. Xu L, Fu M.: Sensoriess Direct Torque Control Technique for Permanent Magnet Synchronous Motors", IEEE Industrial Applications Conf., Vol.1, pp. 159-164,1999.