Diagnostyka maszyn wirnikowych w oparciu o technologię rozproszonych układów pomiarowych

• Autorzy: Hanc A. , Śliwa Z. , Uhl T.

Warianty tytułu

EN

The diagnostics of rotating machines by means of distributed measurement systems

• Konferencja: Problemy eksploatacji maszyn i napędów elektrycznych (2003; Ustroń, Polska)
• Języki publikacji: PL

Abstrakty

EN

The paper describes the new hardware & software solution dedicated for diagnostic purposes of rotating machinery. Elaborated system - diagnostic module VIBCON is based on the technology of distributed measurements. The main unit is responsible for data acquisition and storage in internal memory. It is capable to record vibration and temperature values in long ranges of time (months, years) together with synchronous time markers. Two channel measurement is suitable for the majority of industrial applications. When capable to work independently, modules can also form the distributed diagnostic system. This is as a result of built in serial ports and TCP/IP protocol for data exchange, system set-up and maintenance. The module VIBCON is equipped with dedicated software responsible for data import to the host computer as well as for data visualization. When setting-up the user can adjust two levels of measured data as warning and alarm thresholds. The excitation of these thresholds is visualized both on Vibcon's control panel and on the graphic interface in host computer in the case of network installation.

Słowa kluczowe

PL

maszyna wirnikowa; diagnostyka; układ pomiarowy

• Wydawca: Sieć Badawcza Łukasiewicz - Górnośląski Instytut Technologiczny
• Czasopismo: Maszyny Elektryczne : zeszyty problemowe
• Rocznik: 2003
• Tom: Nr 66
• Strony: 69--73
• Opis fizyczny: Bibliogr. 4 poz., rys.

Twórcy

autor

Hanc A.

• Energocontrol Sp. z o.o., Kraków

autor

Śliwa Z.

• Akademia Górniczo-Hutnicza w Krakowie

autor

Uhl T.

• Akademia Górniczo-Hutnicza w Krakowie

Bibliografia

• [1]. Uhl T., Hanc A., „Internetowy system monitorowania stanu maszyny", Pomiary Automatyka Kontrola, nr 12/2002.
• [2]. Uhl T., Hanc A., „Rozproszony system monitorowania", Diagnostyka, nr 2/2002.
• [3] Yamamoto Y., Mita A., Okada K., Intranet based remote monitoring system for construction site, Proc. Annula Meeting of the Archit. Institute of Japan, 1998, pp 417-418.
• [4] Todoroki A., Shimura Y., Inada T., Pług and monitor System via Ethernet with distribute Sensors and CCD camera, Proc. 2nd Int. Workshop on Structural Health monitoring, Stanford(CA), 1999, 571-580.