PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wpływ starzenia cieplnego na występowanie wyładowań niezupełnych w izolacji międzyzwojowej silników zasilanych z przemienników częstotliwości

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
The influence of thermal ageing on the presence of partial discharge in insulation of low voltage motors
Konferencja
Problemy eksploatacji maszyn i napędów elektrycznych: materiały konferencyjne (2002; Ustroń, Polska)
Języki publikacji
PL
Abstrakty
EN
The influences of the thermal ageing on the presence of partial discharges in the insulation of inverter-fed motors and on decreasing of its durability have been testing. On the basis of the results it was found that before ageing the durability of the conventional enamelled wires rapidly decreased under impulse voltage when the level of pd. inception is attained. In special enamelled wires with an excellent pd. resistance the voltage at which durability decreases is much higher. Partial discharge inception voltage (DIV) of in the conventional varnished enamelled wires after thermal ageing is much lower than DIV of enamelled wires without varnish. The impulse voltage endurance of polyesterimide wires (thermal class 180) after ageing is better than endurance of polyesterimide+amidimide wire (thermal class 200). The thermal class for interturn insulation of inverter-fed motors should be then determined using accessory criteria - the impulse voltage endurance. The developing the method would be necessary.
Rocznik
Tom
Strony
31--35
Opis fizyczny
Bibliogr. 5 poz., rys.
Twórcy
autor
  • Instytut Elektrotechniki, Oddział Wrocław
autor
  • Instytut Elektrotechniki, Oddział Wrocław
  • Instytut Elektrotechniki, Oddział Wrocław
autor
  • Instytut Elektrotechniki, Oddział Wrocław
Bibliografia
  • [1] Bellomo J.P., Castelan P., Lebey T., Effect of pulsed voltages on dielectric material properties, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 6, no 1, Feb 1999, p. 20-26.
  • [2] Grzybowski S., Feilat E., Night P., Multistress life models of epoxy encapsulaced magnet wire under high frequency pulsating voltage, Proceeding of the APTADM'2001, p. 162-165.
  • [3] Pfeifeer W., Paede M., About the influence of the environmental conditions on partial discharge extinction voltage at high frequency voltage, Proceedings of the IEEE International Symposium on Electrical Insulation, 2000.
  • [4] PN-EN 60851-5+A1:1998 Przewody nawojowe-Metody badań- Właściwości elektryczne.
  • [5] PN-EN 60172: 1999 Sposób określania wskaźnika temperaturowego przewodów nawojowych emaliowanych.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0017-0068
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.