PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Optimal Placement and Sizing of Shunt FACTS Devices in Power Systems Using Heuristic Optimization Techniques: a Comprehensive Survey

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Optymalne usytuowanie elementów SVC i STATCOM w systemie FACTS
Języki publikacji
EN
Abstrakty
EN
The Static Var Compensator (SVC) and the Static Synchronous Compensator (STATCOM), as two components of Flexible AC Transmission System (FACTS) devices, play an important role in controlling the reactive power flow to the power network. Because of economic considerations, identifying the best location for installing the SVC and STATCOM is also important. The FACTS devices placement problem is commonly solved using heuristic optimization techniques which are diverse and have been the subject of ongoing enhancements. This paper presents a survey of the literature from the last decade that has focused on the various heuristic optimization techniques applied to determine optimal placement and sizing of the SVC and STATCOM.
PL
W artykule analizuje się optymalne usytuaowanie elementów SVC I STATCOM w systemie FACTS. Przedstawiono stan wiedzy wykorzystania do tego celu różnych heurystycznych metod optymalizacji.
Rocznik
Strony
335--341
Opis fizyczny
Bibliogr. 63 poz., rys.
Twórcy
autor
autor
autor
  • Department of Electrical, Electronic and Systems Engineering, Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor, Malaysia, sirjani@eng.ukm.my
Bibliografia
  • [1] Saravanan M., Slochanal S.M.R., Venkatesh P., Abraham J.P.S., Application of particle swarm optimization technique for optimal location of FACTS devices considering cost of installation and system loadability, Electric Power System Research,77 (2007),276–283
  • [2] Hingorani N.G., High Power Electronics and Flexible AC Transmission System, IEEE Power Engineering Review ,7 (1988),3-4
  • [3] Galiana G.D., Assessment and Control of the Impact of FACTS devices on Power System Performance, IEEE Transactions on Power Systems, 11 (1996), No. 4,1931-1936
  • [4] Sirjani R., Mohamed A., Shareef H., Optimal placement and sizing of Static Var Compensators in power systems using Improved Harmony Search Algorithm, PRZEGLĄD ELEKTROTECHNICZNY,87 (2011),No. 7 ,214-218
  • [5] Azadani E.N., Hosseinian S.H., Janati M., Hasanpor P., Optimal Placement of Multiple STATCOM, 12th International Middle-East Power System Conference,(2008),523-528
  • [6] Zhang, W., Li F., Tolbert L. M., Optimal Allocation of Shunt Dynamic Var Source SVC and STATCOM: A Survey, Department of Electrical and Computer Engineering, the University of Tennessee, Knoxville, (2006),1-6
  • [7] Saranjeet K., Evolutionary Algorithm Assisted Optimal Placement of FACTS Controllers in Power system, Master Thesis, Thapar University,(2009)
  • [8] Gyugyi, M.L., Shauder C.D., SenK.K., Static Synchronous Series Compensator A solid state Approach to the series compensation of transmission line, IEEE Transactions on Power Delivery,12(1997),No. 3,406-417
  • [9] Thukaram D., Lomi A., Selection of static VAR compensator location and size for system voltage stability improvement, Electr Power Syst Res,54(2000):139–150
  • [10] Mithulananthan N., Canizares C.A., Reeve J., Comparison of PSS, SVC and STATCOM controllers for damping power system oscillation, IEEE Trans Power Syst, 18 (2003),786–792
  • [11] Sode-Yome A., Mithulananthan N.,Comparison of shunt capacitor, SVC and STATCOM in static voltage stability margin enhancement.Int J Elec Eng Educ , 41(2004),No. 2,158–171
  • [12] Khajehzadeh M., Taha M.R., El-Shafie A., Eslami M., A Survey on Meta-Heuristic Global Optimization Algorithms, Research Journal of Applied Sciences, Engineering and Technology,3 (2011), No. 6,569-578
  • [13] Rechenberg I., Cybernetic solution path of an experimental problem, Royal Aircraft Establishment, brary Translation ,(1965),1122
  • [14] Holland J., An introduction with application to biology, control and artificial intelligence Adaptation in Natural and Artificial System. MIT Press, Cambridge, MA, (1975).
  • [15] Holland J.H., Adaptation in natural and artificial systems. The University of Michigan Press,AnnArbor, Michigan, (1975)
  • [16] Kirkpatrick S., Gelatt C.D., Vecchi M.P., Optimization by simulated annealing,Science,220 (1983),No. 4598,671-680
  • [17] Farmer J.D., Packard N.H., Perelson A.S., The immune system, adaptation, and machine learning. Physica D., 22(1986),No. 1-3, 187-204
  • [18] Dorigo M., Maniezzo V., Optimization, Learning and Natural Algorithms. Ph.D. Thesis,Politecnico di Milano, Italy,(1992)
  • [19] Kennedy J., Eberhart R., Particle swarm optimization. IEEE International Conference on Neural Networks Perth, Australia, (1995) ,1942-1948
  • [20] Geem Z.W., Kim J.H., Loganathan G., A new heuristic optimization algorithm: Harmony search, Simulation, 76 (2001), No.2, 136-701
  • [21] Nakrani S., Tovey C., On honey bees and dynamic server allocation in internet hosting centers.Adapt. Behav., 12(2004), No. 3-4, 223
  • [22] Rezaee-Jordehi A., Joorabian M., Optimal Placement of Multi- Type FACTS Devices in Power Systems Using Evolution Strategies,The 5th International Power Engineering and Optimization Conference,(2011),352-357
  • [23] Mendes J.C., Saavedra O.R., Pessanha J.O., Power system restoration restoration with priority loads using an evolutionary strategy, Proceedings of 34th North American Power Symposium, Arizona,(2002),254-260
  • [24] Santiago M., Maldonado R., Optimal Placement of FACTS Controllers in Power systems via Evolutionary Strategies, Proceedings of IEEE international conference on Transmission and Distribution Evolutionary Computation,(2006), 1-6
  • [25] Dominguez-Navarro J.A.,Bernal-Agustin J.L., Diaz A.,Requena D.,Vargas E.P., Optimal parameters of FACTS devices in electric power systems applying evolutionary strategies,Electrical Power and Energy Systems,29 (2007),83–90
  • [26] Talebi M.A., Kazemi A., Gholami A., Rajabi M., Optimal Placement of Static Var Compensators in Distribution Feeders For Load Balancing By Genetic Algorithm, 18th International Conference and Exhibition on Electricity Distribution,(2005),1-6
  • [27] Zhang Y., Milanovic J.V., Voltage Sag Cost Reduction With Optimally Placed FACTS Devices, 9th Internatinal Conference on Electrical Power,Quality and Utilisation, (2007), 1-6
  • [28] Farsangi M.M., Nezamabadi-pour H., Song Y.H., Lee K.Y., Placement of SVCs and Selection of Stabilizing Signals in Power Systems,IEEE TRANSACTIONS ON POWER SYSTEMS,22 (2007), NO.3 ,1061-1071
  • [29] Baghaee H.R., Jannati M., Vahidi B., Hosseinian S.H., Rastegar H., Improvement of Voltage Stability and Reduce Power System Losses by Optimal GA-based Allocation of Multi-type FACTS Devices. 11th International Conference on Optimization of Electrical and Electronic Equipment,(2008),209-214
  • [30] Huang J.S., Negnevitsky M., A Messy Genetic Algorithm Based Optimization Scheme for SVC Placement of Power Systems under Critical Operation Contingence, International Conference on Computer Science and Software Engineering,(2008),467-472
  • [31] Pisica,I., Bulac C., Toma L., Eremia M., Optimal SVC Placement in Electric Power Systems Using a Genetic Algorithms Based Method , IEEE Bucharest Power Tech Conference (2009),1-6
  • [32] Sundareswaran K., Bharathram P., Siddharth M., Vaishnavi G., Shrivastava N.A., Sarma H., Voltage Profile enhancement through optimal placement of FACTS devices using Queen- Bee-Assisted GA,Third International Conference on Power Systems,(2009),1-5
  • [33] Belazzoug M., Boudour M., FACTS Placement Multiobjective Optimization For Reactive Power System Compensation, International Multi-Conference on Systems, Signals and Devices,(2010),1-6
  • [34] Berizzi A., Bovo C., Ilea V., Optimal placement of FACTS to mitigate congestions and inter-area oscillations,IEEE Trondheim PowerTech, 2011,1-8
  • [35] Tavakoli Bina M., Rezaei Siahbidi J., Kanzi K., Application of Averaging Technique to the Power System Optimum Placement and Sizing of Static Compensators, The 7th International Power Engineering Conference,(2005), 1-6
  • [36] Samimi A., Golkar M.A., A Novel Method for Optimal Placement of STATCOM in Distribution Networks Using Sensitivity Analysis by DIgSILENT Software, Asia-Pacific Power and Energy Engineering Conference ,(2011), 1-5
  • [37] Gitizadeh M., Kalantar M., A New Approach for Congestion Management via Optimal Location of FACTS Devices in Deregulated Power Systems, Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies,(2008),1592-1597
  • [38] Chang C.S., Huang J.S., Optimal SVC placement for voltage stability reinforcement, Electric Power Systems Research, 42 (1997),165 172
  • [39] Pirayesh,A., Parastar A., Nikoukar J., Optimal location of FACTS devices in a power system using modified particle swarm optimization, 42nd International Universities Power Engineering Conference,(2007),1122-1128
  • [40] Benabida R., Boudourb M., Abido M.A., Optimal location and setting of SVC and TCSC devices using non-dominated sorting particle swarm optimization, Electric Power Systems Research ,79 (2009),1668–1677
  • [41] Laifa A., Boudour M., Optimal Location of SVC for Voltage Security Enhancement using MOPSO, Journal of electrical systems ,(2009),Special Issue(1) , 73-78
  • [42] Eghbal M., Yorino N., Zoka Y., Comparative Study on the Application of Modern Heuristic Techniques to SVC Placement Problem,JOURNAL OF COMPUTERS,4(2009), No. 6,535-541
  • [43] Jumaat S.A., Musirin I., Othman M.M., Mokhlis H., PSO Based Technique for Loss Minimization Considering Voltage Profile and Cost Function ,The 5th International Power Engineering and Optimization Conference,(2011),36-41
  • [44] Tibin J., Sini X., Chitra S., Cherian V.I., Sreedharan S., PSO Based Optimal Placement and Setting of FACTS Devicesfor Improving the Performance of Power Distribution System , Bonfring International Journal of Power Systems and Integrated Circuits, (2011), Special Issue (1),60-64
  • [45] Rao K.S., Kalyan Kumar B., Placement Of Svc For Minimizing Losses And Maximizing Total Transfer Capability Using Particle Swarm Optimization,IET Conference Publications,(2011),1-5
  • [46] Sreedharan S., Ongsakul W., Singh J.G., Buayai K., Wartana I.M., PSO Based Tuningof FACTS Controllers for Maximizing the Wind Energy Penetration in Power Systems, IEEE PES Innovative Smart Grid Technologies,(2011),287-293
  • [47] Del Valle Y., Hernandez J.C., Venayagamoorthy G.K., Harley R.G., Optimal STATCOM Sizing and Placement Using Particle Swarm Optimization, Proceedings of the IEEE Transmission and Distribution Conference and Exposition Latin America,(2006),1-6
  • [48] Hernandez J.C., del Valle Y., Venayagamoorthy G.K., R.G. Harley, Optimal Allocation of a STATCOM in a 45 Bus Section of the Brazilian Power System using Particle Swarm Optimization, Proceedings of the IEEE Swarm Intelligence Symposium,(2006),69-75
  • [49] Panda S. and Padhy N.P., Optimal location and controller design of STATCOM for power system stability improvement using PSO, Journal of the Franklin Institute ,345,(2008),166– 181
  • [50] Del Valle Y., Venayagamoorthy G.K., Harley R.G., Comparison of Enhanced-PSO and Classical Optimization Methods: a case study for STATCOM placement, Proceedings of the IEEE 15th International Conference on Intelligent System Applications to Power Systems,(2009), 1-7
  • [51] Varshney S., Srivastava L., Pandit M., Comparison of PSO Models for Optimal Placement and Sizing of Statcom,Second International Conference on Sustainable Energy and Intelligent System,(2011),346-351
  • [52] Lee K., Geem Z., A new meta-heuristic algorithm for continuous engineering optimization: harmony search theory and practice, Computer Methods in Applied Mechanics and Engineering,194 (2005),3902-3933
  • [53] Kazemi A., Parizad A., Baghaee H.R., On The Use Of Harmony Search Algorithm In Optimal Placement Of Facts Devices To Improve Power System Security, Proceeding of EUROCON '09 ,(2009),570-576
  • [54] Parizad A., Kalantar M., Khazali A., Application of HSA and GA in Optimal Placement of FACTS Devices Considering Voltage Stability and Losses, International Conference on Electric Power and Energy Conversion Systems, (2009), 1-7
  • [55] Baskarana J., Palanisamy V., Optimal location of FACTS devices in a power system solved by a hybrid approach, Nonlinear Analysis , 65 (2006) ,2094–2102
  • [56] Mohammadi A., Jazaeri M., A Hybrid Particle Swarm Optimization-Genetic Algorithm For Optimal Location Of Svc Devices In Power System Planning,42nd International Universities Power Engineering Conference , 2007,1175 - 1181
  • [57] Majumdar S., Chakraborty A.K., Chattopadhyay P.K., Active Power Loss Minimization With FACTS Devices Using SA/PSO Techniques, Third International Conference on Power Systems,(2009),1-5
  • [58] Khandani F., Soleymani S., Mozafari B., Optimal Allocation of SVC to Enhance Total Transfer Capability Using Hybrid Genetics Algorithm and Sequential Quadratic Programming, The 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI), 2011,861-864
  • [59] Sirjani R., Mohamed A., Shareef H., A Hybrid BCO/HS Algorithm for Optimal Placement and Sizing of Static Var Compensators in Power Systems,11th WSEAS/IASME International Conference on Electric Power Systems, High Voltages, Electric Machines (POWER `11),(2011),54-59
  • [60] Ishak S., Abidin A.F., RahinanStatic T.K.A., Var Compensator Planning Using Artificial Immune System For LOSS Minimisation And Voltage Improvement, National Power & Energy Conference (PECon) 2004 Proceedings,(2004),41-45
  • [61] Alabduljabbar A.A., Milanovi J.V., Generation Costs Reduction Through Optimal Allocation of FACTS Devices Using Low Discrepancy Sequences, Power Systems Conference and Exposition,(2006),946-951
  • [62] Wu,Q.H., Lu Z., Li M.S., Ji T.Y., Optimal Placement of FACTS Devices by A Group Search Optimizer with Multiple Producer, Evolutionary Computation, IEEE World Congress on Computational Intelligence,(2008),1033-1039
  • [63] Minguez R., Milano F., Zarate-Minano R., Conejo A.J., OptimalNetwork Placement of SVC Devices, IEEE Transactions onPower Systems, 22(2007), No. 4,1851-1860
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS1-0049-0090
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.