Identyfikatory
Warianty tytułu
Dysza plazmowa działająca pod ciśnieniem atmosferycznym do sterylizacji powierzchni nieodpornych na działanie wysokiej temperatury
Języki publikacji
Abstrakty
The paper presents review of possibilities offered by currently applied decontamination methods for medicine, biotechnology and food industry, emphasising the application of non-thermal atmospheric pressure plasma jet for heat non-resistant materials.
W artykule omówiono możliwości zapewniane przez nowoczesne metody sterylizacji dla potrzeb medycyny oraz przemysłu spożywczego i biotechnologicznego ze szczególnym uwzględnieniem innowacyjnej, nietermicznej dyszy plazmowej do dekontaminacji materiałów nieodpornych na działanie wysokiej temperatury.
Wydawca
Czasopismo
Rocznik
Tom
Strony
139--140
Opis fizyczny
Bibliogr. 21 poz., rys.
Twórcy
autor
- Institute of Electrical Engineering and Electrotechnologies, Lublin University of Technology, Poland, askmik@hotmail.com
Bibliografia
- [1] Favero M., Developing indicators for sterilization. In: Rutala, W., Disinfection, sterilization and antisepsis in health care. Washington, DC: Association for Professionals in Infection Control and Epidemiology, Inc., 1998, 119-132.
- [2] Favero M., Sterility assurance: concepts for patient safety. In: Rutala W, editor. Disinfection, sterilization and antisepsis: principles and practices in healthcare facilities. Washington, DC: Association for Professionals in Infection Control and Epidemiology, Inc. 2001, 110-9.
- [3] Spaulding E., Chemical disinfection of medical and surgical materials. In: Lawrence, C., Block SS, eds. Disinfection, sterilization, and preservation. Philadelphia: Lea & Febiger, 1968, 517-31.
- [4] Spaulding E., J. Hosp. Res. 1972, 9, 5-31.
- [5] http://www.cdc.gov, Guideline for Disinfection and Sterilization in Healthcare Facilities 2008.
- [6] Wolcott R., Ehrlich G., JAMA, 299 (22), 2008, 2682-2684.
- [7] Mah T., Pitts B., Pellock B., Walker G., Stewart P., O'Toole G., Nature 426, 2003, 306-310.
- [8] Menashi W., Treatment of surfaces, US Patent 3 383 163, 1968.
- [9] Steelman V., Aorn J. 55, 1992, 773–787.
- [10] Henn G., Birkinshaw C., Buggy M., Jones E., J. Mat. Sci. (Mater. Med.) 7, 1996, 591–595.
- [11] Wan J., Coventry J., Swiergon P., Sanguansri P., Versteeg C., Trends in Food Sci.&Tech. 2009, 1-11.
- [12] www.sterrad.com
- [13] Laroussi M., Leipold F., Int. J. Mass Spectrom. 233, 2004, 81–86.
- [14] Moisan M., Barbeau J., Pelletier J., Philip N., Saoudi B., 13th CIP, 2001, 12-18.
- [15] Ohkawa H., Akitsu T., Tsuji M., Kimura H., Kogoma M., Fukushima K., Surface and Coatings Tech., 200 (20-21), 2006, 5829-5835.
- [16] Montie T., Kelly-Wintenberg K., Roth J., IEEE Trans Plasma Sci., 28 (1), 2000, 41 - 50.
- [17] Vleugels M., Shama G., Deng X., Greenacre E., Brocklehurst T., Kong M., IEEE Trans Plasma Sci., 33, 2005, 824–828.
- [18] www.cerionx.com
- [19] Liu H., Chen J., Yang L., Zhou Y., Appl.Surface Sci., 254 (6), 2008, 815-1821.
- [20] Stryczewska H., Łękawa A., Electrical Review, 6, 2009, 183-186
- [21] Barraud N., Hassett D., Hwang S., Rice S., Kjelleberg S., Webb J., J. Bacteriology, 188 (21), 2006, 7344-7353
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS1-0049-0038