PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Charakterystyki tribologiczne roślinnych olejów bazowych dla olejów hydraulicznych

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Tribological characteristics of vegetable oils intended for the bases of hydraulic oils
Języki publikacji
PL
Abstrakty
PL
Zbadano i porównano właściwości smarne roślinnych baz olejowych w aspekcie zastosowania dla biodegradowalnych olejów hydraulicznych. Oleje bazowe należały do trzech różnych klas lepkości: VG 32, VG 46 i VG 68. Wytworzono je, wprowadzając do oleju rzepakowego modyfikatory lepkości. Modyfikatorami lepkości były oleje roślinne i produkty ich chemicznej modyfikacji oraz estry syntetyczne. Oceniono przeciwzużyciowe i przeciwzatarciowe właściwości wytworzonych baz olejowych. Uzyskane wyniki badań umożliwiły przeprowadzenie analizy wpływu rodzaju dodatków wiskozujących na zdolność powstałych kompozycji smarowych do ochrony testowego węzła tarcia przed zużyciem i zatarciem.
EN
The lubricating properties of vegetable oil bases in use for biodegradable hydraulic oils were tested and compared. Oil bases belonged to three different viscosity grades: VG 32, VG 46, and VG 68. The bases were formulated through the addition of viscosity improvers to rapeseed oil. The viscosity improvers were vegetable oils, products of a chemical modification of the vegetable oils, and synthetic esters. The antiwear and extreme-pressure properties of the formulated oil bases were investigated. The obtained results made it possible to analyse the influence of the type of viscosity improvers on preventing the lubricated tribosystem from sliding wear and scuffing.
Czasopismo
Rocznik
Tom
Strony
201--211
Opis fizyczny
Bibliogr. 14 poz., rys.
Twórcy
autor
autor
  • Instytut Technologii Eksploatacji – Państwowy Instytut Badawczy, 26-600 Radom, ul. K. Pułaskiego 6/10
Bibliografia
  • 1. Podniadło A.: Paliwa, oleje i smary w ekologicznej eksploatacji. WNT, Warszawa 2002.
  • 2. Bartz W.J.: Lubricants and the environment. Tribology International, 1998, 31, s. 35-47.
  • 3. Haus F., German J., Junter G-A.: Primary biodegradability of mineral base oils in relation to their chemical and fhysical characteristics. Chemosphere, 2001, 45 s. 983-990.
  • 4. Battersby N.S., Morgan P.: A note on the use of the CEC L-33A-93 test to predict the potential biodegradation of mineral oil based lubricants in soil. Chemosphere, 2007, 35 s. 1773-1779.
  • 5. Gawrońska H., Górski W.: Biodegradowalność i ekotoksyczność wybranych rodzajów cieczy eksploatacyjnych. Paliwa, Oleje i Smary w Eksploatacji, 1999, 68, s. 11-14.
  • 6. Haus F., Boissel O., Junter G-A.: Primary and ultimate biodegradabilities of mineral base oils and their relationships with oil viscosity. International Biodeterioration and Biodegradation, 2004, 54, s. 189-192.
  • 7. Krasowski A.: Napędy hydrauliczne, pneumatyczne i sterowanie. Wyd. Akademii Rolniczej, Lublin, 2000.
  • 8. Budny E.: Napęd i sterowanie układów hydraulicznych w maszynach roboczych. Wyd. Naukowe ITeE - PIB, Warszawa-Radom, 2002.
  • 9. Bartz W.J.: Ecotribology: environmentally acceptable tribological practices. Tribology International. 2006, 39, s. 728-733.
  • 10. Goyan R. i inni: Biodegradable Lubricants. Lubricattion Engineering, 1998, 7, s. 10-17.
  • 11. Pettersson A.: High-performance base fluids for environmentally adapted lubricants. Tribology International, 2007, 40, s. 638-645.
  • 12. Jayadas N.H., Prabhakaran Nair K., Ajithkumar G.: Tribological evaluation of coconut oil as an environment-friendly lubricant. Tribology International, 2004, 40, s. 350-354.
  • 13. Erhan S.Z., Asadauskas S.: Lubricant basestocks from vegetable oils. Industrial Crops and Prodicts, 2000, 11, s. 277-282.
  • 14. Szczerek M., Tuszyński W.: Badania tribologiczne. Zacieranie. ITeE, Radom, 2000.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS1-0042-0027
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.