PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wpływ warunków tarcia na tribochemiczne przemiany oleju PAO-6 w układzie stal-stal

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Influence of friction conditions on the tribochemical changes of PAO synthetic oil in steel-steel system
Języki publikacji
PL
Abstrakty
PL
Zidentyfikowano produkty powstające w wyniku przemian tribochemicznych poli-alfa-olefinowego oleju bazowego w układzie tarciowym stal-stal. Testy tribologiczne prowadzono w temperaturze pokojowej oraz 100 i 200°C. Środek smarowy, pobrany po testach z węzła tarcia, poddano badaniom techniką GC/MS. Stwierdzono, iż podczas tarcia w podwyższonej temperaturze powstają w oleju bazowym aktywne związki polarne zawierające tlen. W wyniku reakcji tych związków z powierzchnią tarcia powstają karboksylany żelaza, wpływające na właściwości warstw wierzchnich elementów węzła tarcia.
EN
This paper aims at investigating tribochemical reactions of poly-alfa-olefins proceedin at ambient and elevated temperature. It has been investigated products of PAO (as a synthetic base oil) conversions proceeding during lubricated friction at 20°C, 100°C and 200°C in the steel ball-on-disk tribosystem. The products of the bulk lubricant changes were identified by means of Gas Chromatography coupled with Mass Spectrometry (GC/MS). It has been shown, that tribologi-cally active oxygen-containing compounds were formed. Among these products aliphatic hydrocarbons as well as ketones and aldehydes were predominated. The last ones under the influence of temperature were oxidized to carboxylic acids which react with metal to iron carboxylates. Interactions of these compounds with rubbing surfaces were examined using Fourier Transform Infrared Microspectrophotometry (FTIRM) technique. Obtained results provide a first evidence for the hypothesis that oxygenation of PAO during friction should be considered even at ambient temperature and that is clearly controlled by the mechanical action. More research is needed to clarify the reaction mechanisms, particularly the mechanism of surface reactions.
Czasopismo
Rocznik
Tom
Strony
61--69
Opis fizyczny
Bibliogr. 9 poz., rys.
Twórcy
autor
  • Instytut Technologii Eksploatacji, Radom, ul. K. Pułaskiego 6/10, 26-600 Radom
  • Instytut Technologii Eksploatacji, Radom, ul. K. Pułaskiego 6/10, 26-600 Radom
Bibliografia
  • 1. Mang T.: Future importance of base oils in lubricants. Proc. of 12th Int. Coll. "Tribology 2000 - Plus", Esslingen (Germany), 2000, 23-35.
  • 2. Buczyński P.: Syntetyczne środki smarowe dla przemysłu. Cz. I. Paliwa, oleje i smary w eksploatacji, 55, 15-18.
  • 3. Galvin P.A., et al.: Benefits for synthetic lubricants in industrial applications. Proc. of 13th Int. Coll. Tribology, Esslingen (Germany), 2002, 1091 -1098.
  • 4. Kazicyna L.A., Kupletska N.B.: Metody spektroskopowe i ich zastosowanie do identyfikacji związków organicznych. WNT, 1976.
  • 5. Zieliński W., Rajca A. (red.): Metody spektroskopowe i ich zastosowanie do identyfikacji związków organicznych. WNT, Warszawa 1995.
  • 6. Brinksmeier E., Walter A.: Formation of reaction layers in machining processes. Proc. of 12th Int. Colloq. "Tribology 2000-Plus", Esslingen (Germany), 2000, 847-852.
  • 7. Makowska M., Grądkowski M.: Przemiany chemiczne poli-α-olefin (PAO) w warunkach tarcia. Problemy Eksploatacji, 2004, 1, 203-212.
  • 8. Kajdas C., Obadi M.: Wear behaviour and tribochemical reactions of low molecular alcohols under boundary lubrication of the steel-on-aluminium system. Tribologia, 1999, 3, 273-287.
  • 9. Cavdar B., Ludema K.C.: Dynamics of dual film formation in boundary lubrication of steels. Part II. Chemical analyses. Wear, 1991, 148, 329-346.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS1-0015-0012
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.