PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Zastosowanie analizy termicznej do oceny zmian starzeniowych eksploatowanego środka smarowego

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
The estimation of senescence changes of grease centre after exploitation tests with the method of the thermal analysis
Języki publikacji
PL
Abstrakty
PL
Analizę termiczną zastosowano do oceny stopnia zestarzenia oleju bazowego oraz opracowanego smaru plastycznego po badaniach eksploatacyjnych. Próbki do badań derywatograficznych pochodziły z łożyska pieca piekarniczego. Jako kryterium oceny przyjęto zmianę odporności termicznej wyznaczoną na podstawie analizy derywatograficznej. Stosując techniki symultaniczne, w których próbka jest badana kilkoma metodami w tym samym czasie (TG/DTA), uzyskano charakterystykę stabilności termicznej środka smarowego w trakcie eksploatacji.
EN
The thermal analysis was used to the estimation of the degree of aging of base oil and of the grease after exploitation research. As the criterion of the estimation of aging of grease after the exploitation one accepted the change of the thermal resistance appointed on the ground of the thermal analysis. Using techniques simultaneous in which the sample is investigated several methods at the same time (TG-DTA) one can obtain the characterization of the degradation of the grease during the exploitation. With this manner we receive the information on of the relative thermal stability of the grease and of changes happening in the sample during her heating. Obtained curves are a measure of exploitation usefulness of grease. The manner of interpretations obtained curve made possible the estimation of happening process of the senescence called out with the influence of external extortions conditioned of the real exploitation. Methods of the thermal analysis prosperously one used to the delimitation of the thermal stability and research of the degradation by the oxygenation. The thermal stability that is to say the persistence in conditions of the elevated temperature to the state one from most essential denominative factors the application usefulness of lubricants.
Czasopismo
Rocznik
Tom
Strony
75--81
Opis fizyczny
Bibliogr. 4 poz., rys.
Twórcy
autor
  • Instytut Technologii Eksploatacji, ul. Pułaskiego 6/10, 26-600 Radom
Bibliografia
  • 1. Bartoszewicz J., Caban W., Krzemiński-Freda H.: Smarowanie łożysk tocznych. Warszawa 1981.
  • 2. Drabik J., Pawelec E. i in.: Specjalistyczne nietoksyczne środki smarowe do maszyn przemysłu piekarniczego, Sprawozdanie z Programu Celowego, Radom 2003.
  • 3. Pawelec E., Drabik J.: Dobór fazy dyspergującej wysokotemperaturowego smaru plastycznego. Problemy Eksploatacji Nr 1, 2004.
  • 4. Paulik F.: Special trends in Thermal Analysis. Wiley&Sons Ltd, West Sussex, England 1995.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS1-0014-0093
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.