Project/product development process critical success factors: A literature compilation

Rocha, H.; Delamaro, M.

Artykuł - szczegóły

Tytuł artykułu

Project/product development process critical success factors: A literature compilation

Autorzy

Rocha H. , Delamaro M.

Treść / Zawartość

Pełne teksty:

httpwww_research_logistyka-produkcja_plimagesstoriesnumer66-projectproductdevelopmentprocesscriticalsuccessfactorsaliteraturecompilation.pdf

Pobierz

Identyfikatory

Warianty tytułu

Języki publikacji

Abstrakty

Project/product development process is a strategic activity related to customer needs fulfilment, achieved through the identification of their desires and needs, responding with innovative products, with adequate characteristics of performance, cost, and distribution. Different authors propose factors in the development processes as being critical. In this article, a list of common findings is presented, concluding that, based on the existing literature, the critical success factors for project and product development processes are: cost and budget management, time and deadline management, product positioning, customer needs fulfilment, organizational alignment, development team characteristics, development process, and organization and work environment management.

Słowa kluczowe

critical success factors procect product development process

Wydawca

Publishing House of Poznan University of Technology

Czasopismo

Research in Logistics & Production

Rocznik

2012

Tom

Vol. 2, No. 3

Strony

273--271

Opis fizyczny

Bibliogr. 84

Twórcy

autor

Rocha H.

autor

Delamaro M.

Department of Industrial Engineering, Rio de Janeiro State University - UERJ, Resende, RJ, 27537-000, Brazil, prof.henrique_rocha@yahoo.com.br

Bibliografia

1. Akca, N. & Ilas, A., (2005), "Produktionsstrategien: Überblick und Systematisierung", Arbeitsbericht Nr. 28. Institut für Produktion und Industrielles Informationsmanagement, Universität Duisburg-Essen / Campus Essen, Fachbereich Wirtschaftswissenschaften.
2. Araujo Junior, C., (2000), "An analysis of the life-cycle of product development tools", [in:] Proceedings of II Congresso Brasileiro de Gestäo e Desenvolvimento de Produtos, Sao Carlos/SP, Brazil.
3. Ariyachanda, T. R. & Frolick, M. N., (2008), "Critical success factors in business performance management - striving for success", [in:] Information Systems Management, Vol.25, No.2, pp.113-120.
4. Baccarini, D., (1999), "The logical framework method for defining project success", [in:] Project Management Journal, Vol.30, No.4, pp.25-32.
5. Baker, B. N., Murphy, D. C. & Fisher, D., (1983), "Factors affecting project success". In: Cleland, D.I. & King, W.R. (Eds.), Project Management Handbook. New York, Van Nostrand Reinhold.
6. Baxter, M., (1995), Product Design: Practical methods for the systematic development of new products, Chapman and Hall, London.
7. Besora, F., (1998), "A inovação e o projeto de produtos: Sua importancia na pequena e media empresa", Dissertation (Master in Engineering), Programa de Pós-graduação em Engen- haria de Produção, Universidade Federal de Santa Catarina, Florianópolis/SC, Brazil.
8. Browning, T., Fricke, E. & Negele, H., (2006), "Key concepts in modelling product devel¬opment processes", [in:] Systems Engineering, Vol.9, No.2, pp.104-128.
9. Bullen, C. & Rockart, J. F., (1981), "A primer on critical success factors", Working Paper, Alfred Sloan School of Management. Center for Information Systems Research, no. 69.
10. Calantone, R., Vickery, S. & Droge, C, (1995), "Business performance and strategic new product development activities: An empirical investigation", [in:] Journal of Product Innovation Management, Vol.12, pp.214-223.
11. Ceryno, P. & Possamai, O., (2008), "Como considerar os princípios do lean manufacturing no processo de desenvolvimento de produtos", [in:] Proceedings of ENEGEP, Rio de Janei¬ro, XXVIII Encontro Nacional de Engenharia de Produção, Rio de Janeiro/RJ, Brazil.
12. Clark, K. B. & Fujimoto, T., (1991\0, Product development performance: Strategy, organization and management in the world auto industry. Boston, Mass.: Harvard Business School Press.
13. Cooke-Davies, T., (2002), "The "real" success factors on project", [in:] International Journal of Project Management, Vol.20, pp. 185-190.
14. Cooper, R. G., (1994a), "Debunking the myths of new product development", [in:] Research Technology Management, Vol.37, No.4, pp.40-50.
15. Cooper, R. G., (1994b), Winning at new products: Accelerating the process from idea to launch. Reading, MA, Perseus Books.
16. Cooper R. G. & Kleinschmidt E. J., (2007), "Winning business in product development: the critical success factors", [in:] Research Technology Management, Vol.39, No.4, pp. 18-29.
17. Costa Junior. A. & Silva, C, (2003), "Os fatores de fracasso no desenvolvimento de produtos: Um estudo de caso em uma pequena empresa de alta tecnologia", [in:] Proceedings of IV Congresso Brasileiro de Gestão e Desenvolvimento de Produtos, Gramado/RS, Brazil.
18. Crow, K., (2005), "Control the NPD process with gate reviews and design reviews", [in:] DRM Associates, available at http://www.npd-solutions.com/reviews.html (access Nov, 1st, 2008).
19. Cusumano, M. & Nokeaba, K., (1990), "Strategy, structure, and performance in product development: Observation for the auto industry", Massachusetts Institute of Technology, Sloan School of Management. Working Paper 3150-90.
20. Delamaro, M. C. & Rocha, H. M., (2006), "Tomada de decisões no processo de desenvolvimento de produtos: Proposta de modelo baseado na teoria de opções reais", [in:] Proceedings of III Congresso Nacional de Excelência em Gestão, Niterói/RJ, Brazil.
21. Driva, H., Pawar, K. S. & Menon, U., (2000), "Measuring product development performance in manufacturing organizations", [in:] International Journal of Production Economics, Vol.63, pp. 147-149.
22. Dvir, D., (1998), "In search of project classification: a non-universal approach to project success factors", [in:] Research Policy, Vol.27, pp.915-935.
23. Gantewerker, S. & Manoski, P., (2003a), "The library - not the lab: Why it's important to do your homework before hands-on product development work begins", [in:] Food Processing, Vol.64, No.9, pp.40-43.
24. Gantewerker, S. & Manoski, P., (2003b), "Don't get caught in the middle: How to successfully negotiate the intermediate and late stages of new product development", [in:] Food Processing, Vol.64, No. 12, pp.32-34.
25. Gemuenden, H. G. & Lechler, T., (1997), "Success factors of project management: The critical few - an empirical investigation", [in:] Innovation in Technology Management - The Key to Global Leadership. PICMET apos;97: Portland International Conference on Management and Technology, 27-31, 375 - 377.
26. Gil, N., (2001), "Product-process development simulation to support specialty contractor involvement in early design", Thesis (PhD), Graduate Division, University of California, Berkeley.
27. Griffin, A. & Page, A. L., (1993), "An interim report on measuring product development success and failure", [in:] Journal of Product Innovation Management, Vol.10, No.2, pp.291-308.
28. Hatch, T. & Urban, G., (1974), "New products: Minimizing risks and maximizing creativity", Massachusetts Institute of Technology, Alfred P. Sloan School of Management, Working Paper no. 752-74.
29. Hippel, E. & Katz, R., (2002), "Shifting innovation to users via toolkits", [in:] Management Science, Vol.48, No.7, pp.821-833.
30. IBM Corporation, (2005), New product development & introduction: Consumer products companies need to move forward boldly. IBM Corporation.
31. Johne, F. A. & Snelson, P. A., (1998), "Success factors in product development: a selective review of the literature", [in:] Journal of Product Innovation Management, Vol.9, No.2, pp.128-139.
32. Jun, H. & Suh, H., (2008), "A modeling framework for product development process considering its characteristics", [in:] IEEE Transactions on Engineering Management, Vol.55, No. 1, pp. 103-119.
33. Keller, R., (2008), "A better way of developing new products: involve your suppliers and operations people in product development process at very earliest stages", [in:] Industry Week, Vol.257, No.6, pp.12.
34. King, S. & Burguess, T., (2006), "Beyond critical success factors: A dynamic model of enterprise system innovation", [in:] International Journal of Information Management, Vol.26, pp.59-69.
35. Koufteros, X. & Marcoulides, G., (2006), "Product development practices and performance: A structural equation modeling-based multi-group analysis", [in:] International Journal of Production Economics, Vol.103, No.l, pp.286-307.
36. Krishnan, V. & Ulrich, K., (2001), "Product development decisions: A review of literature", [in:] Management Science, Vol.47, No.l, pp. 1-21.
37. Lam, P. & Chin, K., (2005), "Identifying and prioritizing critical success factors for conflict management in collaborative new product development", [in:] Industrial Marketing Management, Vol.34, pp.761-772.
38. Laseter, T. & Ramdas, K., (2001), "Product types and supplier roles in product development: An exploratory analysis", Working paper n.01-14, Daren Graduate School of Business Administration, University of Virginia.
39. Lehmann, D. R., (2006), "It's new but is it good? New product development and macro- marketing", [in:] Journal of Macromarketing, Vol.26, No.l, pp.8-16.
40. Liu, R. & Lu, Y., (2003), "Distributed agent for cost-effective monitoring of critical success factors",[in:] Decision Support Systems, Vol.35, pp.353-366.
41. MacCormack, A., Verganti, R. I. & Iansiti, M., (2001), "Developing products on "Internet time": The anatomy of a flexible development process", [in:] Management Science, Vol.47, No.l, pp.133-152.
42. May-Plumlee, T. & Little, T., (2006), "Proactive product development integrating consumer requirements", [in:] International Journal of Clothing Science and Technology, Vol.18, No.l, pp.53-66.
43. Meybodi, M., (2003), "Using principles of just-in-time to improve new product development process", [in:] Advances in Competitiveness Research, Annual 2003, Vol.11, No.l, pp. 116-140.
44. Miller, L., (1993), Concurrent engineering design: Integrating the best practices for process improvement. Michigan: Society of Manufacturing Engineers.
45. Moraes, R., (2004), "Condicionantes de desempenho dos projetos de software e a influência da maturidade em gestão de projetos. Thesis (Doctor of Business Administration), Faculdade de Economia, Administração e Contabilidade da Universidade de São Paulo, São Paulo/SP, Brazil.
46. Mundim, A. P. F., Rozenfeld, H., Amaral, D. C., Silva, S. L. & Horta, L. C. (2002), "Aplicando o cenário de desenvolvimento de produtos em um caso prático de capacitação professional", [in:] Gestão & Produção, Vol.9, No.l, pp.1-16.
47. Norrie, J., (2006), "Improving results of project portfolio management in the public sector using a balanced strategic scoring model", Thesis (Doctor of Project Management - DPM). Royal Melbourne Institute of Technology, School of Property, Construction and Project Management, Design and Social Context, RMIT University.
48. Oxberry, E., (2002), "Rapid fire: With ever advancing rapid prototyping and production technologies, the development of new materials is as important as that of the management technology itself', [in:] Plastics Engineering, Vol.243, No. 12, pp.28.
49. Pinto J. K. & Slevin, D. P., (1998), "Critical success factors across the project life cycle", [in:] Project Management Journal, Vol.19, No.3, pp.67-75.
50. Pugh, S., (1996), Creating innovative products using total design. Massachusetts: Addison Wesley Longman.
51. Quintella, H. L. M. M. & Osorio, R., (2002), "CMM e Qualidade: Caso Dataprev", [in:] Proceedings of ENEGEP. Ouro Preto/MG, Brazil: ABEPRO, Vol.1, pp.21-31.
52. Quintella, H. L. M. M. & Rocha, H. M., (2006), "Medindo o nivel de maturidade dos pro- cessos de desenvolvimento de produtos das montadoras de veiculos com o CMMI", [in:] Revista Mundo PM, Vol.1, No.6, pp.20-27.
53. Rocha, H. M., (2002a), "Modos de impacto e efeitos dos produtos nas organizações", [in:] Proceedings of SIMPOI, V Simpósio de Administração de Produção, Logistica e Operações Internacionais, São Paulo/SP, Brazil.
54. Rocha, H. M., (2002b), "Análise de impactos e simulação dos efeitos dos produtos nas organizações e na sociedade", [in:] Proceedings of Congresso Nacional de Excelência em Gestãão, Niterói/RJ, Brazil.
55. Rocha, H. M., (2003a), "Metodologia estruturada de desenvolvimento de produtos: Uma abordagem voltada à excelência nos negócios",[in:] Proceedings of ENEGEP, XXIII Encontro Nacional de Engenharia de Produção. Ouro Preto/MG, Brazil.
56. Rocha, H. M., (2003b), "Desenvolvimento de produtos: Um instrumento estratégico para sobrevivência das organizações", [in:] Proceedings of Simpósio de Gestão e Estratégia em Negócios, Seropédica/RJ, Brazil.
57. Rocha, H. M., (2005), "Fatores crlticos de sucesso do start up de veiculos e a qualidade (CMMI) do desenvolvimento de produtos no Sul Fluminense", Dissertation (Master of Management Systems). Universidade Federal Fluminense, Niterói/RJ, Brazil.
58. Rockart, J. F., (1978), "A new approach to defining the chief executive's information needs", Working Paper no. 37. Center for Information Systems Research, Sloan School of Management. Massachusetts Institute of Technology.
59. Rockart, J. F., (1979), "Chief executives define their own data needs", [in:] Harvard Business Review, Vol.57, pp.81-83.
60. Rozenfeld, H., Forcellini, F. A., Amaral, D. C., Toledo, J. C., Silva, S. L., Alliprandini, D. H. & Scalice, R. K., (2006), Gestäo de desenvolvimento de produtos: Uma referência para a melhoria do processo. Säo Paulo/SP, Brazil: Saraiva.
61. Rozenfeld, H. & Amaral, D., (1999), "Proposta de uma tipologia de processos de desenvolvimento de produto visando a construção de modelos de referênda", [in:] Proceedings of Congresso Brasileiro de Gestão e Desenvolvimento de Produtos. Belo Horizonte/MG, Brazil.
62. Rozenes, S., Vitner, G. & Spraggett, S., (2006), "Project control: Literature review", [in:] Project Management Journal, Vol.37, No.4, pp.5-14.
63. Schmenner, R. W. & Tatikonda, M. V., (2005), "Manufacturing process flexibility revisited", [in:] International Journal of Operations & Production Management, Vol.25, No.12, pp.1183-1189.
64. Segismundo, A. & Miguel, P. A. C., (2008), "Key success factors on new product development: A preliminary investigation on the cooperation model at an automotive company", [in:] Proceedings of ENEGEP, XXVIII Encontro Nacional de Engenharia de Produção, Rio de Janeiro/RJ, Brazil.
65. Senanayake, M. & Little, T., (2001), "Measures for new product development", [in:] Journal of Textile and Apparel, Technology and Management, Vol.1, No.3, pp.1-14.
66. Shenhar A. J., Dvir, D., Levy, O. & Maitz, A. C., (2001), "Project success: A multidimensional strategy concept", [in:] Long Range Planning, Vol.34, pp.699-725.
67. Shulman, R., (2003), "Recovery and the new product paradox", [in:] Brandweek, Vol.44, No.25, pp.20.
68. Silva, C., (2001), "Método para avaliação do desempenho do processo de desenvolvimento de produtos", Thesis (Doctor of Engineering), Universidade Federal de Santa Cata- rina, Florianópolis, Brazil.
69. Sobek II, D. K., Liker, J. K. & Ward, A.C., (1998), "Another look at how Toyota integrates product development", [in:] Harvard Business Review, Vol. 76, No. 4, July-August, pp.36-49.
70. Sobrero, M. & Roberts, E. B., (2001), "The trade-off between efficiency and learning in interorganizational relationships for product development", [in:] Management Science, Vol.47, No.4, pp.93-511.
71. Stanke, A. & Murman, E., (2002), "A framework for achieving lifecycle value in aerospace product development", [in:] Proceedings of International Council of Aeronautical Science Congress.
72. Takeuchi, H. & Nonaka, I., (1986), "The new product development game", [in:] Harvard Business Review, Jan-Feb. 1986, pp. 137-146.
73. Tesch, D., Kloppenborg, T. & Stemmer, J., (2003), "Project management learning: What the literature has to say", [in:] Project Management Journal, Vol.34, No.4, pp.33-39.
74. Tonioli, J., (2003), "A integração entre o processo de desenvolvimento de produtos e o gerenciamento da cadeia de suprimentos e sua relação com o papel desempenhado pelo engenheiro de produto", Dissertation (Master of Engineering), Escola Politecnica da Universidade de Säo Paulo, Universidade de São Paulo, São Paulo/SP, Brazil.
75. Valambrini, A. C., (2008), "O processo de produção na empresa montadora sob a perspectiva informacional da gestão do ciclo de vida do produto (PLM)", [in:] Proceedings of ENEGEP, XXVIII Encontro nacional de Engenharia de Produção, Rio de Janeiro/RJ, Brazil.
76. Valeriano, D., (1998), Gerência de projetos: pesquisa, desenvolvimento e engenharia. Säo Paulo/SP, Brazil: Makron Books.
77. Van Kleef, E., (2006), "Consumer research in the early stages of the new product development: Issues and applications in the food domain", Thesis (Doctor of Food, Health, and Biotechnology), Wageningen Universiteit, Netherlands.
78. Van Kleef, E., Van Trijp, H. & Luning, P., (2005), "Consumer research in the early stages of the new product development: A critical review of methods and techniques", [in:] Food Quality and Preferences, Vol.16, pp. 181-201.
79. Versprille, K., (2001), "Elevating CAE into the design process", [in:] Computer-Aided Engineering, Vol.20, No.9, p.52.
80. Von Corswant, F., Wynstra, F. & Wetzeis, M., (2003), "In chains? Automotive suppliers and their product development activities", ERIM Report Series #ERS-(2003- 027-LIS. Erasmus Institute of Management, Erasmus University Rotterdam, Roter-dam, The Netherlands.
81. Wateridge, J., (1998), "How can IS/IT projects be measured for success?", [in:] International Journal of Project Management, Vol.16, No.l, pp.59-63.
82. Witzenburg, G., (2003), "Vehicle development view from the trenches: A look at the tricks and tools automakers use to squeeze time and cost out of new product development", [in:] Automotive Industries, Vol.183, No.3, pp.40-43.
83. Yadav, O. O. & Goel, P. S., (2008), "Customer satisfaction driven quality improvement target planning for product development in automotive industry", [in:] International Journal of Production Economics, Vol.113, No.l.2, pp.997-1011.
84. Zwikael, O. & Globerson, S., (2006), "From critical success factors to critical success processes", [in:] International Journal of Production Research, Vol.44, No. 17, pp.3433-3449.

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-article-BPP2-0020-0056