Tests of ceramic cutting tools during interrupted cutting

• Autorzy: Cep R. , Janasek A. , Brychta J.
• Języki publikacji: EN

Abstrakty

EN

The tests reporting about working conditions are in a practice used by producers and users. The overwhelming percentage of tests of machine tools is focused on interrupted cut (turning). Reliability test (by turning to interrupted cutting) has been proposed in the grant project GAĆR, which is done on a special preparation - interrupted cut simulator. Two types of ceramic cutting tools from the WIDIA company were tested on the slats 12 050 (C45) material and 15 128 (13MoCrV6) material in this article. The number of shocks (to the edge destruction) was a criterion or when the ceramic cutting tool achieved the limit of shock - 6000th, which was based on experience of resolvers. The tests are part of the grant project - Czech Science Foundation, grant number 101/08/P118, entitled Ceramic Cutting Tool Tests at Interrupted Cut.

Słowa kluczowe

EN

ceramic cutting tools; machining; interrupted cut

PL

narzędzia tnące; testy ceramiczne

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Zeszyty Naukowe Politechniki Poznańskiej. Budowa Maszyn i Zarządzanie Produkcją
• Rocznik: 2011
• Tom: Nr 15
• Strony: 5--17
• Opis fizyczny: Bibliogr. 6 poz.

Twórcy

autor

Cep R.

autor

Janasek A.

autor

Brychta J.

• Technical University of Ostrava, Faculty of Mechanical Engineering Department of Machining and Assembly, 17. Listopadu 15/2172, Ostrava, Czech Republic,

Bibliografia

• [1] Čep R., Ceramic Cutting Tool Tests at Interrupted Machining, Disertačni práce, VŠB-TU Ostrava, 2005, p. 101.
• [2] Fulemova J., Janda Z., Řehor J., Studium řezného procesu při tvrdem HSC frézováni řeznou keramikou, Strojírenská technologie, roč. XV., č. 1, p. 10-17, ISSN 1211-4162, 2010.
• [3] Kocman K. Prokop J., Řezné nástroje pro soustružení tvrdých materiálu, Strojírenská technologie, roč. VIII., č. 3, p. 16-21, ISSN 1211-4162, 2003.
• [4] Vasilko K., Možnosti zlepšení kvality soustružených povrchů, Strojírenská technologie, VI, n. l, p. 9-13. ISSN 1211-4162,2010.
• [5] Cep R. Ceramic Cutting Tools and their Application Areas, in: WORKSHOP Faculty of Mechanical Engineering, Ostrava, p. 79 and proceedings on CD, ISBN 80-248-0750-95, 2010.
• [6] WIDIA.com [online]. 2010 [cit. 2010-11-03], WIDIA Turning 2010 catalog, Accessible from WWW: <http://www.widia.com/images/widia/pdfs/A-09-02078_Widia_Turning_inch.pdf>.