Identyfikatory
Warianty tytułu
Variations of bed temperature in initial cycles of adsorption-desorption process
Języki publikacji
Abstrakty
Wyznaczono maksymalne wartości temperatur, jakie mogą wystąpić w złożu adsorbentu w początkowych cyklach adsorpcyjno-desorpcyjnych zmien-nociśnieniowych. Rozważono proces rozdzielania parowej mieszaniny cta-nol-woda na zeolitach. Temperatury złoża wyznaczano eksperymentalnie oraz na podstawie obliczeń opartych na modelu matematycznym procesu. Zgodność wartości doświadczalnych i obliczeniowych jest zadowalająca.
The maximum temperatures that can occur in the adsorbent bed in the initial pressure swing adsorption-desorption cyclcs have been determined. The process of adsorption separation of ethanol-water vapour mixture on zeolites has been considered. The bed temperatures have been determined experimentally and by calculations based on the mathematical model of the process. Good agreement exists between the experimental data and the results of simulations.
Czasopismo
Rocznik
Tom
Strony
64--65
Opis fizyczny
Bibliogr. 9 poz.
Twórcy
autor
autor
autor
- Wydział Inżynierii i Technologii Chemicznej, Politechnika Krakowska, kkupiec@chemia.pk.edu.pl
Bibliografia
- [1] M. Simo, C.J. Brown, V. Hlavacek: Computers and Chemical Engineering, 32, 1635 (2008).
- [2] M. Simo, S. Sivashanmugam, C.J. Brown, V. Hlavacek: Ind. Eng. Chem. Res., 48, 9247 (2009).
- [3] R. Sims, M. Taylor, J. Saddler, W. Mabee: From 1st to 2nd Generations Biofuel Technologies - an Overview of Current Industry and RD&D Activities, International Energy Agency, 2008
- [4] H. Chang, X-G. Yuan, H. Tian, A-W. Zeng: Chemical Eng. Technol. 29, 454 (2009).
- [5] H. Chang, X-G. Yuan, H. Tian, A-W. Zeng: Chemical Eng. Process. 45 , 747 (2006).
- [6] S. Al-Asheh, F. Banat, N. Al-Lagtah: Trans IChemE, Part A, Chem. Eng. Res. Design, 82 ,855 (2004).
- [7] M. Gwadera, A. Kubala, K. Kupiec: Inż. Ap. Chem. 49, nr 1, 49, (2010).
- [8] K. Kupiec, J. Rakoczy, E. Lalik: Chemical Eng. Process.: Process Intensification, 48, 1199 (2009).
- [9] K. Kupiec, J. Rakoczy, Ł. Zieliński, A. Georgiou: Adsorption Sci. Techn. 26, 209 (2008).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPP2-0013-0036