Kierunki rozwoju powłok PVD przeznaczonych na narzędzia do obróbki plastycznej

• Autorzy: Wrońska I. , Czechowski K. , Bednarski P.

Warianty tytułu

EN

Trends in development of PVD coatings designed for metal forming tools

• Języki publikacji: PL

Abstrakty

PL

Na bazie publikacji dokonano przeglądu kierunków i analizę możliwości rozwoju powłok PVD przeznaczonych na narzędzia do obróbki plastycznej, w tym przykład powłoki wykonanej w IZTW w ramach prac z tego zakresu.

EN

The review of trends and the analysis of development possibilities of PVD coatings designed for metal forming applications were done basing on the publications and the example of one of the coatings deposited at IZTW in the framework of research works in this area was included.

Słowa kluczowe

PL

powłoki PVD; narzędzia do obróbki plastycznej

EN

PVD coatings; metal forming tools

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Zeszyty Naukowe Politechniki Poznańskiej. Budowa Maszyn i Zarządzanie Produkcją
• Rocznik: 2009
• Tom: Nr 11
• Strony: 155--164
• Opis fizyczny: Bibliogr. 47 poz.

Twórcy

autor

Wrońska I.

autor

Czechowski K.

autor

Bednarski P.

• Zakład Obróbki Skrawaniem i Narzędzi Instytut Zaawansowanych Technologii Wytwarzania w Krakowie,

Bibliografia

• [1] Berkowski L.: - „Stale szybkotnące na narzędzia do obróbki plastycznej". Instytut Obróbki Plastycznej, Poznań 1994.
• [2] Podgornik B., Hogmark S., Sandberg O., Leskovsek V.: - "Wear resistance and antisticking properties of duplex treated forming tool steel", Wear 254 (2003), s. 1113-1121.
• [3] Arai T., Glaser H.M.: - "Substrate selection for tools used with hard thin film coatings", MetalForming Online, June 1998, http://www.tdcoating.com/MFOL_substrate_ selection.htm.
• [4] Materiały informacyjne firmy Uddeholm: - "Hotvar® fills the gap between hot and cold work tools steels".
• [5] Materiały informacyjne: - "DC53 cold work die and mold steel", http://www.newwestmetals.com/ dc531/pdf.
• [6] Materiały informacyjne firmy Uddeholm: - "VANADIS 23-SuperClean™. High performance powder metallurgical cold work tool steel".
• [7] Madorsky Y., Thompson M.: - "Coating for stamping and forming tools. Three options for improved wear". Stamping Journal®, March 2005, http://www.thefabricator.com/ ToolandDie/ToolandDie_Article.cfm?ID1058.
• [8] Betiuk M.: - „Technologia PVD i PAPVD w praktyce", Inżynieria powierzchni, nr 2 (2005), s. 3-13.
• [9] Kocemba W.: - „Powłoki PVD BALINIT®. Wybrane zastosowania", Inżynieria powierzchni, nr 2 (2005), s. 57-61.
• [10] Materiały informacyjne firmy Oerlikon Balzers: - „Powłoki BALINIT® gwarancją znakomitych wyników w obróbce plastycznej"; „BALINT® guarantees superb results in punching and forming"; „Plastics processing and metal die-casting: products and applications"; "Powlekanie komponentów i części maszyn. Produkty i zastosowania"; „BALINIT® ALCRONA makes your tools fit for the ultimate in performance", „BALINIT® ALCRONA boosts punching and forming productivity", www.oerlikonbalzerscoating.com, www.oerlikon.com/balzers, www.oerlikon/coatingservices.
• [11] Materiały informacyjne firmy IonBond: - "IonBond coatings - stamping & forming", http://www.ionbond.com.
• [12] Materiały informacyjne firmy Swiss Tek Coating, Inc.: - "Coating information - cutting, punching, forming", http://www.swiss-tekcoationgs.com/tool-coatings.html.
• [13] Segal L., Tovbin R.: - "Hard coatings for heavy duty stamping tools". http://www.sputtek.com.paper1999013230a.htm, http://www.sputtek.com/stampingtools.html.
• [14] Pesch P., Sattel S., Woestmann S., Ulrich S.: - "New multifunctional PVD-coating in the material system Cr-BCN-Si for steel sheet forming", Surf. Coat. Technol., 200 (2005), s. 1065-1070.
• [15] Fuentes G.G. i in.: - "Recent advances in the chromium nitride PVD process for forming and machining surface protection", Surf. Coat. Technol., nr 167 (2005), s. 415-421.
• [16] Carlsson P., Olsson M.: - "PVD coatings for sheet metal processes - a tribological evaluation", Surf. Coat. Technol., nr 200 (2006), s. 4654-4663.
• [17] Lugscheider E., Bobzin K., Piñero C., Klocke F., Massmann T.: - "Development of a superlattice (Ti, HF, Cr)N coating for cold metal forming applications", Surf. Coat. Technol., nr 177-178 (2004), s. 616-622.
• [18] Tarkany N.: - "Balancing wear, strength and toughness", http://daytonprogress.com.
• [19] Janoss B.: - "PVD/CVD tool coatings enhance stamping and forming of stainless steels", MetalFormingMagazine, March 1999, http://archive.metalformingmagazine.com 1999/03/tooling/PVDCVD/PVDCVD.htm.
• [20] Cunha L. i in.: - "Performance of chromium nitride based coatings under plastic processing conditions", Surf. Coat. Technol., 133-134 (2000), s. 61-67.
• [21] Pesch P. i in.: -"Performance of hard coated steel tools for steel sheet drawing", Surf. Coat. Technol., 163-164 (2003), s. 739-746.
• [22] Martinez E., Romero J., Lousa A., Esteve J.: - "Wear behavior of nanometric CrN/Cr multilayers’, Surf. Coat. Technol., 163-164 (2003), s. 571-577.
• [23] Yang S., Wiemann E., Teer D.G.: - "The properties and performance of Cr-based multilayer nitride hard coatings using unbalanced magnetron sputtering and elemental metal targets", Surf. Coat. Technol., 188-189 (2004), s. 662-668.
• [24] Kuvin B.F.: - "New CrN coatings", Metalforming, July 2003, s. 54-56, http://www.metalformingmagazine.com.
• [25] Esteve J., Romero J., Gómez M., Lousa A.: - "Cathodic chromium carbide coatings for molding die applications", Surf. Coat. Technol., 188-189 (2004), s. 506-510.
• [26] Podgornik B., Hogmark S., Sandberg O.: - "Influence of surface roughness and coating type on the galling properties of coated forming tool steel", Surf. Coat. Technol., 184 (2004), s. 338-348.
• [27] Michler T., Taube K.: "DLC coating extend die life & cut lubrication demand in forming. „MetalForming OnLine", http://archive.metalformingmagazine.com/1998/06/DLC/dlc.htm.
• [28] Murakawa M., Takeuchi S.: - "Evaluation of tribological properties of DLC films used in sheet forming of aluminium sheet", Surf. Coat. Technol., 163-164 (2003), s. 561-565.
• [29] Murakawa M., Jin M., Hayashi M.: - "Study on semidry/dry wire drawing using DLC coated dies", Surf. Coat. Technol.", 177-178 (2004), s. 631-637.
• [30] Panjam P., Bončina I., Bevk J., Čekada M.: - "PVD hard coatings applied for the wear protection of drawing dies", Surf. Coat. Technol., 200 (2005), s. 133-136.
• [31] DiRuggiero C.: - "Advanced ceramics Excel in high-speed metalforming tools", MetalForming, nr 2, (2000), s. 48-55.
• [32] Myint M.H. i in.: - "Evaluation of wear mechanisms of Y-TZP and tungsten carbide punches", Journal of Material Processing Technology, 140 (2003), s. 460-464.
• [33] Czechowski K., Pofelska-Filip I., Królicka B.: - „Powłoki PVD przeznaczone na narzędzia do obróbki plastycznej ze stali szybkotnącej", Inżynieria Powierzchni, nr 2, (2006), s. 77-82.
• [34] Zeng X.T., Zhang S., Muramatsu T.: - "Comparison of three advanced hard coatings for stamping applications", Surf. Coat. Technol., 127 (2000), s. 38-42.
• [35] Materiały informacyjne firmy Oerlikon Balzers: BALINIT® ARCTIC. Coatings that leave your tools cold, www.oerlikon.com/coatingservices.
• [36] Hovsepian P. Eh., Munz W.-D.: „Synthesis structured and applications of nanoscale multilayer/superlatice structured PVD coatings" in "Nanostructured Coatings" ed. By Cavaleiro A., De Hosson J.Th.M., Springer 2006, s. 555-644.
• [37] Klocke F., Massmann T., Gerschwiler: - "Combination of PVD tool coatings and biodegradable lubricants in metal forming and machining", Wear, 259 (2005), s. 1197-1206.
• [38] Escher C., Henke T.: - „New trends in thin coatings for sheet-metal forming tools", Proceedings of the 6th Int. Tooling Conference - the use of tool steels, experience and research, Karlstadt, (2002), s. 919-933.
• [39] Podgornik B., Hogmark S., Pezdirnik J.: - „Comparison between different test methods for evaluation of galling properties of surface engineered tool surfaces", Wear 257 (2005), s. 843-851.
• [40] Podgornik B., Hogmark S., Sandberg O.: - "Proper coating selection for improved galling performance of forming tool steel", Wear (2006), s. 15-21.
• [41] Klocke F. i in.: m- "Carbon based tool coatings as an approach for environmentally friendly metal forming processes", 260 (2006), 287-295.
• [42] Zhao Sh.-Sh. i in.: - "Deposition of thick TiAIN coatings on 2024 Al/SiCp substrate by Arc ion plating", Surf. Coat. Technol., 202 (2008), s. 5170-5174.
• [43] Veprek S., Veprek-Heijman M.J.G.: - „Industrial applications of superhard nanocomposite coatings", Surf. Coat. Technol., 202 (2008), s. 5063-5073.
• [44] Clarysse F., Lauwerens W., Vermeulen M.: - „Tribological properties of PVD tool coatings in forming operations of steel sheet", wear, 264 (2009), s. 400-404.
• [45] Franz R. i in.: - "Influence of phase transition on the tribological performance of arcevaporated AlCrVN hard coatings", Surf. Coat. Technol., 203 (2009), s. 1101-1105.
• [46] Bobzin K. i in.: - „Advancement of a nanolaminated TiHfN/CrN PVD tool coating by a nano-structured CrN top layer in interaction with a biodegradable lubricant for green metalforming", Surf. Coat. Technol., 203 (2009), s. 3184-3188.
• [47] Bobzin K. i in.: - „Investigations on nanolaminated TiZrN/CrN as a tribological PVD hard coating for incremental sheet forming tools", in: Advanced Engineering Materials, vol 11, Issue 8, (2009) pp. 674-679, Wiley-Vch Verlag.