Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Influence of heat treatment in silicone oil on the structure and properties of polyamide 6 and polyamide 6/montmorillonite microcomposite
Języki publikacji
Abstrakty
W artykule przestawiono wyniki badań wpływu obróbki cieplnej, prowadzonej w oleju silikonowym w temperaturze 95°C i 155°C, na strukturę i właściwości próbek wykonanych z poliamidu 6 oraz mikrokompozytu poliamid 6/montmorylonit. Badania obejmowały: analizę termiczną (DSC), morfologię przełomów i mapę rozkładu atomów krzemu (SEM), właściwości mechaniczne (wytrzymałość na rozciąganie, udarność próbek z karbem metodą Charpy'ego) oraz chłonność wody.
The article presents the results of influence of heat treatment in silicone oil (at temperature 95°C and 155°C) on the structure and properties of polyamide 6 and polyamide 6/montmorillonite microcomposites. In this work following investigation were made: thermal analysis (DSC), morphology of fracture surface and map distribution of silicon in composite (SEM), mechanical properties (tensile strength, Charpy's notched impact strength) and moisture absorption.
Czasopismo
Rocznik
Tom
Strony
133--150
Opis fizyczny
Bibliogr. 34 poz.
Twórcy
autor
autor
autor
- Dr hab. - Instytut Technologii Materiałów Politechniki Poznańskiej
Bibliografia
- [1]Ansari D. M., Price G. J., Correlation of mechanical properties of clay filled polyamide mouldings with chromatographically measured surface energies, Polymer, 2004, vol. 45, no. 11, s. 3663-3670.
- [2]Baschek G., Hartwig G., Zahradnik F., Effect of water absorption in polymers at low and high temperatures, Polymer, 1999, vol. 40, no. 12, s. 3433-3441.
- [3]Bureau M. N., Denault J., Cole K. C., Enright G. D., The role of crystallinity and reinforcement in the mechanical behavior of polyamide-6/clay nanocomposites, Polym. Eng. Sci., 2002, vol. 42, no. 9, s. 1897-1906.
- [4]Campoy I., Arribas J. M., Zaporta M. A. M., Marco C., Gómez M. A., Fatou J. G., Crystallization kinetics of polypropylene-polyamide compatibilized blends, Eur. Polym. J., 1995, vol. 31, no. 5, s. 475-480.
- [5]Cho J. W., Paul D. R., Nylon 6 nanocomposites by melt compounding, Polymer, 2001, vol. 42, no. 3, s. 1083-1094.
- [6]Chow W. S., Mohd. Ishak Z. A., Ishiaku U. S., Karger-Kocsis J., Apostolov A. A., The effect of organoclay on the mechanical properties and morphology of injection-molded polyamide 6/polypropylene nanocomposites, J. Appl. Polym. Sci., 2004, vol. 91, no. 1, s. 175-189.
- [7]Drozdov A. D., de C. Christiansen J., Gupta R. K., Shah A. P., Model for anomalous moisture diffusion through a polymer-clay nanocomposite, J. Polym. Sci., Part B: Polym. Phys., 2003, vol. 41, no. 5, s. 476-492.
- [8]Fornes T. D., Paul D. R., Crystallization behavior of nylon 6 nanocomposites, Polymer, 2003, vol. 44, no. 14, s. 3945-3961.
- [9]Fornes T. D., Yoon P. J., Keskkula H., Paul D. R., Nylon 6 nanocomposites: The effect of matrix molecular weight, Polymer, 2001, vol. 42, no. 25, s. 9929-9940.
- [10]Fornes T. D., Yoon P. J., Paul D. R., Polymer matrix degradation and color formation in melt processed nylon 6/clay nanocomposites, Polymer, 2003, vol. 44, no. 24, s. 7545-7556.
- [11]Forsstrom D., Terselius B., Thermo oxidative stability of polyamide 6 films I. Mechanical and chemical characterisation, Polym. Degrad. Stab., 2000, vol. 67, no. 1, s. 69-78.
- [12]Gao J.-G., Yu M. S., Li Z.-T., Nonisothermal crystallization kinetics and melting behavior of bimodal medium density polyethylene/low density polyethylene blends, Eur. Polym. J., 2004, vol. 40, no. 7, s. 1533-1539.
- [13]Garcia-López D., Gobernado-Mitre I., Fernandez J.F., Merino J.C., Pastor J.M., Influence of clay modification process in PA6-layered silicate nanocomposite properties, Polymer, 2005, vol. 46, no. 8, s. 2758-2765.
- [14]He Ch., Liu T., Tjiu W. Ch., Sue H.-J., Yee A. F., Microdeformation and fracture mechanisms in polyamide-/organoclay nanocomposites, Macromolecules, 2008, vol. 41, no. 1, s. 193-202.
- [15]Homminga D. S., Goderis B., Mathot V. B. F., Groeninckx, Crystallization behavior of polymer/montmorillonite nanocomposites, Polymer, 2006, vol. 47, no. 5, s. 1630-1639.
- [16]Housz Ingen A. J., Mixing ring for homogenizing highly viscous materials, Raport University of Twente, Enschede, Netherlands 2001.
- [17]Hu X., Zhao X., Effects of annealing (solid and melt) on the time evolution of polymorphic structure of PA6/silicate nanocomposites, Polymer, 2004, vol. 45, no. 11, s. 3819-3825.
- [18]Ito M., Mizuochi K., Kanamoto T., Effects of crystalline forms on the deformation behaviour of nylon-6, Polymer, 1998, vol. 39, no. 19, s. 4593-4598.
- [19]Kelar K., Modyfikacja polimerów, Poznań, Wydawnictwo Politechniki Poznańskiej, 1992.
- [20]Kelar K., Ciesielska D., Fizykochemia polimerów - wybrane zagadnienia, Poznań, Wyd. Politechniki Poznańskiej 1997.
- [21]Kim G.-M, Michler G. H., Ania F., Balta Calleja F. J., Temperature dependence of polymorphism in electrospun nanofibres of PA6 and PA6/clay nanocomposites, Polymer, 2007, vol. 48, no. 10, s. 4814-4823.
- [22]Kojima Y., Usuki A., Kawasumi M., Okada A., Fukushima Y., Kurauchi T., Kamigaito O., Mechanical properties of nylon 6-clay hybrid, J. Mater. Res., 1993, vol. 8, no. 5, s. 1185-1189.
- [23]Li Q., Wei Q., Wu N., Cai Y., Gao W., Structural characterization and dynamic water adsorption of electrospun polyamide6/montmorillonite nanofibres, J. Appl. Polym. Sci., 2008, vol. 107, no. 6, s. 3535- 3540.
- [24]Liu X., Wu Q., Non-isothermal crystallization behaviors of poly amide 6/clay nanocomposites, Eur. Polym. J., 2002, vol. 38, no. 7, s. 1383-1389.
- [25]Liu A., Xie T., Yang G., Synthesis of Exfoliated Monomer Casting Polyamide 6/Na+- Montmorillonite Nanocomposites by Anionic Ring Opening Polymerization, Macromol. Chem. Phys., 2006, vol. 207, no. 7, s. 701-707.
- [26]McAdam C. P., Hudson N. E., Liggat J. J., Pethrick R. A., Synthesis and characterization of nylon 6/clay nanocomposites prepared by ultrasonication and in situ polymerization, J. Appl. Polym. Sci., 2008, vol. 67, no. 5, s. 651-656.
- [27]Monson L., Braunwarth M., Extrand C. W., Moisture absorption by various polyamides and their associated dimensional changes, J. Appl. Polym. Sci., 2008, vol. 107, no. 1, s. 355-363.
- [28]Phang I. Y., Ma J., Shen L., Liu T., Zhang W.-D., Crystallization and melting behavior of multi-walled carbon nanotube-reinforced nylon-6 composites, Polym. Int., 2006, vol. 55, no. l, s. 71-79.
- [29]Szostak M., Mieszalniki statyczne i dynamiczne w technologiach wtryskiwania, Plastics Review, 2008, vol. 77, no. 2, s. 14-17.
- [30]Usuki A., Kojima Y., Kawasumi M., Okada A., Fakushima Y., Kurauchi T., Kamigatio O., Synthesis of nylon 6-clay hybrid, J. Mater. Res., 1993, vol. 8, no. 5, s. 1179-1184.
- [31]Wu T. Z., Liao C. S., Polymorphism in nylon 6/clay nanocomposites, Macromol. Chem. Phys., 2000, vol. 201, no. 18, s. 2820-2825.
- [32]Wunderlich B., Reversible crystallization and the rigid-amorphous phase in semicrystalline macromolecules, Prog. Polym. Sci., 2003, vol. 28, no. 3, s. 383^450.
- [33]Zhou H., Wilkes G. L., Comparison of lamellar thickness and its distribution determined from d.s.c., SAXS, TEM and AFM for high-density polyethylene films having a stacked lamellar morphology, Polymer, 1997, vol. 38, no. 23, s. 5735-5747.
- [34]Zuchowska D., Polimery konstrukcyjne, Warszawa, WNT 1995.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPP1-0088-0045