PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Zużycie ostrzy z różnych materiałów narzędziowych podczas wspomaganego laserowo procesu toczenia twardej ceramiki Si3N4

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Wedge wear of various tool materials during laser assisted turning of hard ceramics Si3N4
Języki publikacji
PL
Abstrakty
Rocznik
Strony
169--182
Opis fizyczny
Bibliogr. 24 poz.
Twórcy
autor
  • Dr inż. - Instytut Technologii Mechanicznej Politechniki Poznańskiej
Bibliografia
  • [1] Byrne G., Dornfeld D., Denkena B., Advancing cutting technology, Annals of the CIRP, 2003, vol. 52/2, s. 483-507.
  • [2]Chih-Wei Chang C.-W., Chun-Pao Kuo C.-P., Evaluation of surface roughness in laserassisted machining of aluminium oxide ceramics with Taguchi method, International Journal of Machine Tools and Manufacture, 2007, vol. 47, s. 141-147.
  • [3]Chryssolouris G., Anifantis N., Kariagannis S., Laser assisted machining: an overviev, Manuf. Sei. Eng., 1997, 119, s. 766-769.
  • [4]Jankowiak M., Machinability of the Si3N4 hard ceramics during laser assisted turning, w Proceedings of 8th International Conference TECHNOLOGY 2003, Bratislava, s. 1-4.
  • [5]Jankowiak M., Influence of Si3N4 ceramics laser heating conditions on wear of wedges and roughness of machined surface in hybrid turning, w: Proceedings of 9th International Conference TECHNOLOGY 2005, Bratislava, s. 391-395.
  • [6]Jankowiak M., Bartkowiak K., Machinability of laser heated silicon nitride ceramics during turning process, w: Proceedings of the 25th International Congress on Applications of Lasers & Electro-Optics ICALEO 2006, October 30 - November 2, Scottsdale, AZ, USA, s. 311-316.
  • [7]Jankowiak M., Kawalec M., Nowak L, Grabchenko A.I., Wear of superhard wedges in hybrid turning of hard technical ceramics, Rezanie i instrument v tehnologičskih sistemah, 2002, 61, s. 202-205.
  • [8]Jankowiak M., Nowak I., Influence of laser heating conditions of ceramics Si3N4 on wear of diamond wedges, w: Zbirnik naukovih statej, Har'kiv NTU “KhPI”, 2006, vol. 1, s. 431-436.
  • [9]Jankowiak M., Zużycie ostrzy skrawających podczas toczenia ceramiki Si3N4 nagrzewanej laserowo, w: X Jubileuszowy Kongres Eksploatacji Urządzeń Technicznych. Materiały konferencyjne, Stare Jabłonki, 6-9 IX 2005, Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy, Radom 2005, s. 169-178.
  • [10]Jankowiak M., Laserowe wspomaganie toczenia twardej ceramiki Si3N4, w: Wybrane zagadnienia obróbek skoncentrowaną wiązką energii, red. M. Styp-Rekowski, Bydgoszcz, BTN2003, s. 184-192.
  • [11]Kawalec M., Jankowiak M., Nowak I., Machinability of Si3N4 technical ceramics with laser heating of machined zone, Rezanie i instrument v tehnologičeskih sistemah, 2000, 57, s. 93-95.
  • [12] Kawalec M., Jankowiak M., Nowakowski Z., Twardowski P., Rybicki M., Hard machining of steel and technical ceramics, w: 1st Jubilee Scientific Conference “Manufacturing Engineering in Time of Information Society”, Gdańsk, 1st - 2nd June 2006, Department of Manufacturing Engineering and Automation, Gdansk University of Technology, s. 169-176.
  • [13]König W., Zaboklicki A., Laserunterstutzte Drehbearbeitunug von Siliziumnitrid Keramik, VDI-Z, 1993, 135, 6, s. 34-39.
  • [14]König W., Zaboklicki U., Laser-assisted hot machining of ceramics and composite materials. Machining of Advanced Materials, NIST Special Publication, 1993, vol. 847, s. 455-463.
  • [15]Lei S., Shin Y.C., Incropera F.P., Deformation mechanisms and constitutive modeling of silicon nitride undergoing laser-assisted machining, International Journal of Machine Tools and Manufacture, 2000, vol. 40, s. 2213-2233.
  • [16]Lei S., Shin Y.C., Incropera F.P., Experimental investigation of thermo-mechanical characteristics in laser-assisted machining of silicon nitride ceramics, ASME J. Manuf. Sei. Eng., 2001, 123, s. 639-646.
  • [17]Pfefferkorn F.E., Shin Y.C., Tian Y., Incropera F.P., Laser assisted machining of magnesia-partially-stabilized zirconia, ASME Journal of Manufacturing Science and Engineering, 2004, vol. 126, s. 42-51.
  • [18]Rebro P., Shin Y.C., Design of operating conditions for crackfree laser-assisted machining of mullite, International Journal of Machine Tools and Manufacture, 2004, vol. 44, s. 677-694.
  • [19]Rebro P., Shin Y.C., Incropera F.P., Laser-assisted machining of reaction sintered mulite ceramics, ASME J. Manuf. Sei. Eng., 2002, 124, s. 875-885.
  • [20]Shin Y.C., Lei. S., Pfefferkorn F.E., Rebro P., Rozzi J.C., Laser-assisted machining: ist potential and future, Machining Technology, 2000, vol. 11, 3, s. 1-6.
  • [21]Tian Y., Shin Y.C., Thermal modeling for laser-assisted machining of silicon nitride ceramics with complex features, ASME Journal of Manufacturing Science and Engineering, 2006, 128 (2), s. 425-434.
  • [22]Uehara K., Takeshita H., Cutting ceramics with technique of hot machining, Annals of the CIRP, 1986, 35/1, s. 55-58.
  • [23]Uhlmann E., Rabe H., Bublath B., Brűcher M., Drehen von Keramiken mit Diamantwerkzeugen, 2000, IDR 34, 2, s. 94-102.
  • [24]Wang Z.Y., Rajurkar K.P., Marugappan M., Cryogenic PCBN turning of ceramic (Si3N4), Wear, 1996, vol. 195, s. 1-6.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPP1-0088-0030
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.