Magnetic non-linearity in 3D FEM models of the electric machines

• Autorzy: Gołębiowski L. , Gołębiowski M. , Mazur D.
• Konferencja: International Symposium on Electrical Machines SME'07 / sympozjum [XLIII; July 2007; Poznań]
• Języki publikacji: EN

Abstrakty

EN

In 3D FEM's of electric machines, the scalar potential is approximated by using node finite elements and vector magnetic potential by edge finite elements. Such 3D FEM's are able to include rotor cage bar skew and cross-currents in magnetic circuits. The electric machines can be modelled in its entirety, including housing, shaft and bearing areas, which makes it possible to study other phenomena. It is however necessary to include the saturation of magnetic circuit. The non-linearity in the magnetic circuits of laminated stacks, as it is referred to further in this paper, is included based on the tangential to the iron magnetisation characteristics. This method was implemented in 3D models, and proved to be competitive to Newton-Raphson analytical method. Its numerical properties were tested on 3D FE model of the three-column multi-winding autotransformer, which is used in 18-pulse diode rectifiers, as well as on 3D model of induction machine.

Słowa kluczowe

EN

3D FEM model; edge finite elements

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Poznan University of Technology Academic Journals. Electrical Engineering
• Rocznik: 2007
• Tom: No 55
• Strony: 95--111
• Opis fizyczny: Bibliogr. 6 poz.

Twórcy

autor

Gołębiowski L.

autor

Gołębiowski M.

autor

Mazur D.

• Rzeszow University of Technology, Department of Electrical and Computer Engineering Fundamental

Bibliografia

• [1]Dąbrowski M., Konstrukcja maszyn elektrycznych, WNT., Warszawa 1977.
• [2]Dąbrowski M., Pola i obwody magnetyczne maszyn elektrycznych, WNT., Warszawa 1971.
• [3]Dąbrowski M., Projektowanie maszyn elektrycznych prądu przemiennego, WNT., Warszawa 1988.
• [4]Demenko A., Obwodowe modele układów z polem elektromagnetycznym, Wydawnictwo Politechniki Poznańskiej, Poznań 2004.
• [5]Kluszczyński K., Momenty pasożytnicze w indukcyjnych silnikach klatkowych, PTETiS, Gliwice-Warszawa, 1993.
• [6]Yueqiang L., Bondeson A., Bergström R., Larson M.G., Samuelsson K., Edge element computation of eddy currents in laminated materials, IEEE Trans, on Magnetics, May 2003, Vol. 39, No. 3, pp. 1758-1765.