PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Measuring techniques in the testing of gas-solid flows in the combustion chambers of large-power CFB boilers

Identyfikatory
Warianty tytułu
Konferencja
"Modelling of Multiphase Flows in Thermo-Chemical Systems. Advanced Measurement Techniques" / sympozjum [5th; September 2nd - 4th, 2005; Stawiska near Gdansk, Poland]
Języki publikacji
EN
Abstrakty
EN
The article present measuring techniques used in the analysis of phenomena that accompany the flows in circulating fluidized-bed conditions in a laboratory and an large scale. Most of consideration is given to noninvasive optical techniques, which arc possible to be used on pilot stands, as well as techniques used in the combustion chambers of large-power circulating boilers. The measuring capabilities of the techniques and examples of the obtained results are provided.
Rocznik
Tom
Strony
149--159
Opis fizyczny
Bibliogr. 10 poz.
Twórcy
autor
  • Częstochowa University of Technology, Department of Heating, Ventilation and Air Protection, Dąbrowskiego 69, 42-200 Częstochowa, Poland
autor
  • Częstochowa University of Technology, Department of Heating, Ventilation and Air Protection, Dąbrowskiego 69, 42-200 Częstochowa, Poland
autor
  • Częstochowa University of Technology, Department of Heating, Ventilation and Air Protection, Dąbrowskiego 69, 42-200 Częstochowa, Poland
Bibliografia
  • [1] Mirek P., The experimetal analysis of two-phase flows of solid-gas using the optical techniques, Ph.D. Thesis, Częstochowa University of Technology, 2002
  • [2] Mirek P., Application of laser sheet technique for analysis of 3d particle velocity fields, Journal of Theoretical and Applied Mechanics 2001, 1, 39, 33-49
  • [3] Mirek P., Algorithm for processing of multiexposure picture, III National Conference Computer Methods and Systems in Scientific Researches and Engineering Designing, 2001, 339-344.
  • [4] Mirek P., Pisarek J., Nowak W., Measurement of velocity and concentration of particles in CFB by means of a novel telemetric probe, Fluidization XI - Present and Future for Fluidization Engineering, May 9-14, 2004, 331-337.
  • [5] Brown R.C., Brue E., Resolving dynamical features of fluidized beds from pressure fluctuations, Powder Technology 2001, 119, 68-80.
  • [6] Leckner B., Golriz M.R., Zhang W., Andersson B.-A., Johnsson F., Boundary layers – first measurements in the 12 MW CFB research plant at Chalmers University, (in:) E.J. Anthony (ed.) Proc. 11th Int. Conf. Fluidized Bed Combustion 1991, ASME, New York, 771-776.
  • [7] Rhodes M.J., Laussmann P., A simple non - isokinetic sampling probe for dense suspensions, Powder Technol. 1992,70, 141-151.
  • [8] Johnsson F., Hartge E.U., Sekret R., Nowak W., Noskievic P., Gadowski J., Kallner P., Hyppanen T., and others, In-furnace processes in a 235 MWe, CFB boiler, Procedings of the f 7th Inernational Conference on Circulating Fluidized Bed 2002, Niagara Falls, Ontario, Canada, May 5-8, 607-614.
  • [9] Johnsson F., Leckner B, Hartge E.U., Werther J., Sekret R., Nowak ., Nostkievic P., Ochodek T, and others, An experimental study of in-furnace processes and dynamic behavior of a 235 MWe CFB boiler, VGB PowerTech 2004, 3, 1-9.
  • [10] Johnsson F., Leckner B., Hartge E.U., Werther J., Sekret R., Nowak W., Noskievic P., Ochodek T., and others. Final report. Processes in large-scale ciculating fluidized bed combustors. ENK5-CT 1999-00005, 2003.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPP1-0076-0044
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.