Investigations of butterfly control valve flow characteristics

• Autorzy: Wojtkowiak J. , Oleśkowicz-Popiel C.
• Języki publikacji: EN

Abstrakty

EN

Butterfly valves are the most popular control devices in ventilation and air conditioning systems. The results of experimental and numerical (CFD) investigations of a commonly used valve having a thin-flat-sharp-edge disk and blockage ratio d/D = 0.947 have been presented. Flow characteristics, flow patterns and pressure distributions in the disk vicinity have becnshown and discussed. Steady-state, three-dimensional, laminar and turbulent flows (10(3) < Re < 2x10(4) have been analyzed. It is shown that the literature data differ considerably from our new experimental and numerical results. Based on the new results an improved flow characteristics equation K=f(d/D, a, Re) valid for dID = 0.947 has been proposed.

Słowa kluczowe

EN

butterfly valve; flow characteristics; experimental study; CFD

PL

zawór skrzydełkowy; charakterystyka przepływu; CFD

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Foundations of Civil and Environmental Engineering
• Rocznik: 2006
• Tom: No. 7
• Strony: 381--395
• Opis fizyczny: Bibliogr. 23 poz.

Twórcy

autor

Wojtkowiak J.

autor

Oleśkowicz-Popiel C.

• Poznań University of Technology, Institute of Enviromental Engineering, Piotrowo 3a, 60-965 Poznań, Poland Tel.: +48 [phone]; fax: +48 [phone],

Bibliografia

• 1. Faella C, Mazzolani FM, Piluso V and Rizzano G. Local Buckling of Aluminum Mcmbers: Testing and Classification, Journal of Structural Engineering, :353-360, 2000.
• 2. Gruttmann F, Sauer R, Wagner W. Theory and Numerics of Three-Dimensional Beams with Elasto-plastic Materiał Behavior, Internationa! Journal for Numerical Methods in Engineering, (12):1675-1702, 2000.
• 3. Rasmusen KJR and Rondal J. Strength Curves for Aluminum Alloy Columns, Engineering Structures : 1505-1517, 2000.
• 4. Yaltinat G. Aluminium im Konstruktiven Ingenierbau, Berlin : Ernst & Sohn, 2003.
• 5. Wagner, W. and Gruttrnann, F. A Simple Finite Rotation Formulation for Composite Shell Elements, Engineering Compittations, : 145-176, 1994.
• 6. Litewka, P. and Wriggers, P. Frictional Contact between 3D-beams with rectangular cross section, Computational Mechanics, 28: 26-39, 2002.