Decomposition of tetrachloromethane by pulsed dielectric-barrier discharge

• Autorzy: Krawczyk K. , Karpiński L. , Magierska A.
• Języki publikacji: EN

Abstrakty

EN

Non-thermal plasma of pulsed dielectric-barrier discharge (PDBD) was used for the decomposition of tetrachloromethane. The study was carried out using air or oxygen as carrier gas. The effect of the initial concentration of CCl4, flow rate of gas mixture and presence of the packing in the discharge gap on conversion rate of CCl4 was studied. The pulsed dielectric-barrier discharge combined with the packing of TiO2, Pt/SiO2 or SiO2 (quartz glass) has been applied for tetrachloromethane conversion. It has been concluded that the granular packing in the discharge gap increases the conversion rate of tetrachloromethane.

Słowa kluczowe

EN

pulsed dielectric-barrier discharge; tetrachloromethane; catalyst

PL

wyładowanie; czterochlorometan; katalizator

• Wydawca: Centrum Materiałów Polimerowych i Węglowych PAN
• Czasopismo: Polish Journal of Applied Chemistry
• Rocznik: 2005
• Tom: Vol. 49, nr 1-2
• Strony: 167--175
• Opis fizyczny: Bibliogr. 17 poz., tabl. 1, rys. 7

Twórcy

autor

Krawczyk K.

• Warsaw University of Technology, Faculty of Chemistry, Noakowskiego 3, 00-664 Warszawa, Poland

autor

Karpiński L.

• Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warszawa, Poland

autor

Magierska A.

• Warsaw University of Technology, Faculty of Chemistry, Noakowskiego 3, 00-664 Warszawa, Poland

Bibliografia

• [1] K. Krawczyk, J. Ruszniak, M. Młotek, A. Czernichowski and K. Schmidt-Szałowski, Polish J. Appl. Chem., XLII, 151 (1998).
• [2] M.J. Kirkpatock, W.C. Finney and B.R. Locke, Cat. Today, 89, 117 (2004).
• [3] Y.-F. Wang, W.-J. Lee, C.-Y. Chen, Y.-R G. Wu and G.R Chang-Chien, Plasma Chem. Plasma Proc., 20, 469 (2000).
• [4] K. Krawczyk, J. Ruszniak and K. Schmidt-Szałowski, Chemik, 5,133 (1998).
• [5] K. Krawczyk, M. Młotek and K. Schmidt-Szałowski, Proc. of 6 Int. Symp. on High Pressure, Low Temp. Plasma Chem., Cork (1998).
• [6] K. Krawczyk, M. Młotek and K. SCHMIDT-Szałowski, High Temp. Material Proc., 5,349 (2001).
• [7] K. Krawczyk and M. Młotek, Appl. Catal. B: Environmental 30 , 233 (2001).
• [8] K.-P. Francke, H. MiessNER and R. Rudolph, Plasma Chem. Plasma Proc., 20, 393 (2000).
• [9] T. Oda, T. Kato, T. Takahashi and K. Shimizu, IEEE Trans. Ind. Appl,, 34, 268 (1998).
• [10] H. Miessner, K.-R Francke and R. Rudolph, Appl Catal. B, 36, 53 (2002).
• [11] R Holzer, u. Roland and F.D. Kopinkie, Catal. B, 38, 163 (2002).
• [12] K. Krawczyk, Polish Journal of Chemical Technology, 4, 2, 17 (2002).
• [13] A. Czernichowski, T. Opalińska and B.V. Potapkin, Proc. International Flame Days, Biarritz (1994).
• [14] M. Penetrante, M.C. Hsiao, A. Kuthi, C. R Burkhart and J.R. Bayless, Proc. European Sectional Conference on Atomic and Molecular Physics of Ionized Gases, Poprad (1996).
• [15] K. Krawczyk and B. Ulejczyk, Plasma Chem. Plasma Proc., 23, 2, 265 (2003).
• [16] K. Krawczyk and B. Ulejczyk, Plasma Chem. Plasma Proc., 24, 2, 155 (2004).
• [17] K. Schmidt-Szałowski, Ozone Science and Engineering, 18, 1,41, (1996).