PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Adsorptive cathodic stripping voltammetric determination of indapamide as copper complex at a hanging mercury drop electrode

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Oznaczanie indapamidu w postaci kompleksu z miedzią techniką inwersyjnej katodowej woltamperometrii po adsorpcyjnym zatężeniu na wiszącej elektrodzie rtęciowej
Języki publikacji
EN
Abstrakty
EN
The voltammetric behavior of indapamide in presence of copper ions was investigated over a wide pH range by using linear sweep adsorptive cathodic stripping voltammetry at hanging mercury drop electrode. An analytical method that based on the adsorptive accumulation of Cu (H)-indapamide complex followed by the reduction of the complexed copper was developed for indapamide determination. The optimum conditions of pH, Cu(II) concentration, accumulation potential and accumulation time were studied. Under optimal conditions a linear calibration graph in the range 20-200 nmol L(-1) and a detection limit of 5 nmol L(-1) were obtained. The relative standard deviation was 2.2% (n = 10) at 50 nmol L(-1). The effect of common excipients and metal ions on the peak height of Cu(II)-indapamide complex was evaluated. The method was applied for the determination of the drug in the tablet dosage form.
PL
Badano woltamperometryczne zachowanie indapamidu w obecności Cu(II) w szerokim zakresie pH. Zastosowano technikę inwersyjnej katodowej woltamperometrii ze wstępnym adsorpcyjnym zatężeniem na wiszącej elektrodzie Hg. Zatężony kompleks indapamidu z Cu(II) był następnie redukowany. W optymalnych warunkach uzyskano liniową krzywą kalibrowania w zakresie 20-200 nmol L(-1) i granicę wykrywalności 5 mmol L(-1). Względne odchylenie standardowe policzone dla l O pomiarów i stężenia 50 nmol L(-1) wynosiło 2.2%. Badano wpływ różnych związków i jonów metali na wysokość piku redukcji. Metodę zastosowano do oznaczania indapamidu w tabletkach farmaceutycznych.
Czasopismo
Rocznik
Strony
273--281
Opis fizyczny
Bibliogr. 19 poz.
Twórcy
autor
  • Department of Chemistry, Faculty of Science, Mansoura University, 34517 Dumyat, Egypt
Bibliografia
  • 1. Thomas J., Hypertension, 76, 152 (1985).
  • 2. Mironneau J., Am. J. Med., 84, 10 (1988).
  • 3. Legorburu M.J., Alonso R.M., Jimenez R.M. and Ortiz E.J., Chromatographic Science, 37, 283 (1999).
  • 4. Ozden T., Turker Z.H. and Tosun A.U., Pharmacy and Pharmacology Communications, 4, 397 (1998).
  • 5. Padval M.V. and Bhargava H.N., J. Pharm. Biomed. Anal., 11, 1033 (1993).
  • 6. Miller R.B., Dadgar D. and Lalande M., J. Chromatogr., Biomed. Appl., 125, 293 (1993).
  • 7. Gaetani E., Laureri C.F., Vitto M., Borghi L., Elia G.F. and Novarini A., Boll. Chim. Farm., 125, 35 (1986).
  • 8. Choi R.L., Rosenberg M., Grebow P.E. and Huntley T.E., J. Chromatogr., 230, 181 (1982).
  • 9. Saleh H.M., Amin A.S. and El-Mammli M., Mikrochim. Acta, 137, 185 (2001).
  • 10. Agrawal Y.K. and Majumdar F.D., Anal. Lett., 28, 1619 (1995).
  • 11. Legorburu M.J., Alonso R.M. and Jimenez R.M., Electroanalysis, 8, 280 (1996).
  • 12. Radi A., J. Pharm. Biomed. Anal., 24, 413 (2001).
  • 13. Wang J., Stripping Analysis: Principles, Instrumentation and Applications, VCH Publishers, Deerfield Beach, FL, USA 1985.
  • 14. Paneli M.G. and Voulgaropoulos A., Electroanalysis, 5, 355 (1993).
  • 15. Fogg A.G., Yusoff A.R.H.M., Moreira J.C. and Zhao R., Anal. Proc., 32, 95 (1995).
  • 16. Shubietah R.M., Abu Zuhri A.Z. and Fogg A.G., Analyst, 119, 1967 (1994).
  • 17. Wopschall R.H. and Shain I., Anal. Chem., 39, 1514 (1967).
  • 18. Miller J.C. and Miller J.N., Statistics for Analytical Chemistry, Ellis Horwood Series, PTR Prentice Hall, NY, London 1993, p. 119.
  • 19. The United States Pharmacopoeia, Suppl. 5, 24th revision, Mack Printing Company, Easton, Pa 2000.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPP1-0037-0011
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.