PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wpływ parametrów polaryzacji na wybrane właściwości warstwy wierzchniej stopu Ti6Al4V po anodowaniu w roztworze kwasu fosforowego

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Effect of polarization parameters on selected properties of anodic layers on Ti6Al4V alloy anodised in phosphoric acid solution
Języki publikacji
PL
Abstrakty
PL
Anodowanie stopu Ti6A14V w 0,5 M roztworze H(3)PO(4) wykonano dwoma metodami, różniącymi się zakresem (18 V i 60 V) i programem polaryzacji. Rezultaty badań strukturalnych (SEM, XRD) i elektrochemicznych (analiza potencjodynamiczna i impedancyjna) powierzchniowych warstw tlenkowych stopu wykazały różnice w ich strukturze i morfologii oraz odporności korozyjnej. Zaobserwowane różnice były odbiciem wpływu napięcia polaryzacji na warunki tworzenia i krystalizacji składników warstwy tlenkowej. Wynikiem obu metod anodowania było wzbogace-nie warstw tlenkowych w tytan i zubożenie w dwa pierwiastki stopowe: aluminium i wanad.
EN
Two different polarization procedures (galvanostatic and potentiostatic) were used for the preparation of anodic layers on the titanium alloy Ti6A14V specimens in 0.5 M phosphoric acid solutions. Thus, the specimens were subject to electrochemical and structural examination. The properties of surface layers were studied by scanning electron microscopy and atomic force mi-croscopy. Impedance spectroscopy (EIS) along with polarization techniques and the XPS, SEM and XRD analyses, revealed the improved corrosion resistance and complex impedance character-istics of surface layers on TJ6A14V alloy obtained by both methods. The differences in appearance, structure of layer and concentrations of both, the alloying elements and phosphates were observed and reflected the influence of the growth rate on the crystallisation of oxides in two different po-larisation conditions. They may be related to the fact that the faster the alloy reaches the passiva-tion potential, the lower is the amount of the film necessary for the occurrence of this phenome-non. In both cases the enrichment of titanium and the decrease of vanadium and aluminium in oxide surface layers were noticed.
Rocznik
Strony
171--178
Opis fizyczny
Bibliogr. 29 poz.
Twórcy
  • Instytut Inżynierii Produkcji i Materiałoznawstwa Politechniki Zielonogórskiej
Bibliografia
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPP1-0016-0035
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.