PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Study of 6 electrodes gliding arc discharge configuration

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Badania ślizgającego się wyładowania łukowego w konfiguracji 6-elektrodowej
Języki publikacji
EN
Abstrakty
EN
Experimental results of the I-V characteristics of the 6 electrode gliding arc discharge are presented. As a power system two 3-phase transformers were used instead of sixth-phase transformer. Power and energy in the two-, three- and six electrodes reactor were measured and photographs of the discharge development by high speed camera were detected.
PL
Przedstawiono badania charakterystyk prądowo-napięciowych ślizgającego się wyładowania łukowego w konfiguracji 6 elektrodowej. Jako układ zasilania wykorzystano dwa transformatory trójfazowe. Mierzono moc i energię wyładowania w układzie dwu-, trzy- i sześcioelektrodowym oraz rejestrowano rozwój wyładowania za pomocą szybkiej kamery.
Rocznik
Strony
86--88
Opis fizyczny
Bibliogr. 12 poz., ilustr.
Twórcy
autor
autor
autor
Bibliografia
  • [1] Stryczewska. H.D. and Komarzyniec. G.K., Properties of gliding arc (GA) reactors energized from AC/DC/AC power converters, Proceedings of 2010 IEEE Region 8 International Conference on Computational Technologies in Electrical and Electronics Engineering, SIBIRCON-2010, 744-749
  • [2] Komarzyniec. G., Diatczyk. J. and Stryczewska. H.D., Arc plasma reactor power system with 5-limb transformer, Journal of Advanced Oxidation Technologies, Vol. 9 (2006), 178-181
  • [3] Stryczewska, H.D., Diatczyk, J., Pawłat, J., Temperature distribution in the gliding arc discharge chamber, Journal of Advanced Oxidation Technologies, Vol. 14 (2) (2011) pp. 276-281
  • [4] Pawłat, J., Diatczyk, J., Stryczewska, H.D., Low-temperature plasma for exhaust gas purification from paint shop - A case study, Przegląd Elektrotechniczny, Vol. 87 (1) (2011) pp. 245-248.
  • [5] M. Mlotek, J. Sentek, K. Krawczyk and K. Schmidt -Szalowski, The hybrid plasma-catalytic process for non-oxidative methane coupling to ethylene and ethane, Applied Catalysis A: General, 366 (2009), 232-241.
  • [6] K. Krawczyk, B. Ulejczyk, H.K. Song, A. Lamenta, B. Paluch and K. Schmidt-Szalowski, Plasma-catalytic reactor for decomposition of chlorinated hydrocarbons, Plasma Chemistry and Plasma Processing, 29 (2009), 27-41.
  • [7] A. Fridman, S. Nester, L.A. Kennedy, A. Saveliev and O. Mutaf-Yardimci, Gliding arc discharge, Progress in Energy and Combustion Science, 25 (1999), 211-231.
  • [8] L. Yu, X. Li, X. Tu, Y. Wang, S. Lu and J. Yan, Decomposition of Naphthalene by dc Gliding Arc Gas Discharge, Journal of Physical Chemistry A 114 (2010), 360-368.
  • [5] Z. Bo, J. Yan, X. Li, Y. Chi and K. Cen, Plasma assisted dry methane reforming using gliding arc gas discharge: Effect of feed gases proportion, International Journal of Hydrogen Energy 33 (2008), 5545-5553.
  • [9] T. Nakamiya, F. Mitsugi, S. Suyama, T. Ikegami, Y. Sonoda, Y. Iwasaki and R. Tsuda, Investigation of Electric Discharge Sound in Atmospheric Pressure Plasma, Journal of Advanced Oxidation Technologies 13 (1) (2010), 43-49.
  • [10] R. McAdams, Prospects for non-thermal atmospheric plasmas for pollution abatement, J. Phys. D: Appl. Phys. 34, (2001) 2810
  • [11] J. S. Chang, T. Myint, A. Chakrabarti, A. Miziolek, Decomposition of toluene by streamer corona discharge with catalyst, Jpn. J. Appl. Phys. 36, 5018 (1997)
  • [12] K. Krawczyk, B. Ulejczyk, Influence of Water Vapor on CCl4 and CHCl3 Conversion in Gliding Discharge Plasma Chemistry and Plasma Processing, 24, 2, 155 (2004)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPOK-0039-0022
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.