Performance Investigation of Induction Heater

• Autorzy: Lu Q. , Huang X. , Ye Y. , Fang Y.

Warianty tytułu

PL

Analiza właściwości nagrzewnicy indukcyjnej

• Języki publikacji: EN

Abstrakty

EN

To achieve high and even-distributed temperature of the rotatory part, an induction heater is designed and its performance of different structure is investigated. By the erected electromagnetic model, structure parameters including height, length and position of induction copper layer are optimized. Its temperature distribution is obtained based on another coupled-field model combining electromagnet field with temperature field. The predicted results show not only the steady temperature distribution, but also the temperature dynamic variation, which are also validated by the prototype measurement. Since the test temperature can almost keep constant and uniform with corresponding temperature controller, the proposed induction heater meets the design requirement.

PL

Zaprojektowano nagrzewnicę indukcyjną do nagrzewania ruchomych elementów. Optymalizowano parametry, takie jak wysokość, długość I pozycja wartwy miedzianej.

Słowa kluczowe

EN

induction heater; electromagnetic field model; coupled-field model; temperature distribution

PL

nagrzewanie indukcyjne; rozkład temperatury

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2012
• Tom: R. 88, nr 9a
• Strony: 277--280
• Opis fizyczny: Bibliogr. 8 poz., rys., wykr.

Twórcy

autor

Lu Q.

autor

Huang X.

autor

Ye Y.

autor

Fang Y.

• Zhejiang University, China,

Bibliografia

• [1] Bingyi Zhang, Fengxiang Wang, Guihong Feng, A mediumfrequency induction heater for development of viscous and high-solidifying oil deposits, Proceedings of The Third International Power Electronics and Motion Control Conference, (IPEMC 2000), Vol.3, pp.1318-1322
• [2] Ding Feng, Nian Liu, Xiaofei Chang, Peng Wang, Chao Ruan, Hong Zhang, The application of electric heater in heavy oil desanding of offshore platform, 2011 International Conference on Electric Information and Control Engineering (ICEICE), pp. 1768-1770, 2011
• [3] E.A. Golovenko, E.V. Kuznetsov, E.S.C. Kinev, Uniform heating control and reduction current unbalance in polyphase induction heaters, Third International Forum on Strategic Technologies (IFOST 2008), pp. 417 - 420, 2008
• [4] M. Runde, N. Magnusson, C. Fulbier, C. Buhrer, Commercial induction heaters with high-temperature superconductor coils, IEEE Transactions on Applied Superconductivity, Vol.21, No.3, pp.1379-1383
• [5] H.I. Sewell, D.A. Stone, C.M. Bingham, Novel, three phase, unity power factor modular induction heater, IEE Proceedings Electric Power Applications, Vol.147, No.5, pp. 371 – 378, 2000
• [6] K. Chatterjee, V. Ramanarayanan, Optimum design of single switch resonant induction heater, Proceedings of the IEEE International Symposium on Industrial Electronics, Vol.2,pp. 858-859,1992.,
• [7] H. Kagimoto, D. Miyagi, N. Takahashi, N. Uchida, K. Kawanaka, Effect of temperature dependence of magnetic properties on heating characteristics of induction heater, IEEE Transactions on Magnetics, Vol.46, No.8, pp.3018-3021, 2010
• [8] P. Alotto, A. Spagnolo, B. Paya, Particle Swarm Optimization of a Multi-Coil Transverse Flux Induction Heating System, IEEE Transactions on Magnetics, Vol.47, No.5, pp.1270-1273, 2011