A computer-aided educational tool for short circuit current calculations

• Autorzy: Oner Y. , Kart S.

Warianty tytułu

PL

Komputerowe wspomaganie obliczeń dydaktycznych prądów zwarcia

• Języki publikacji: EN

Abstrakty

EN

In the present study, for better visual teaching of short circuit calculations used in the field of electrical engineering, a computer software program was developed. With this computer program, two-phase and three-phase short circuit calculations can be performed easily and calculations become easier. The program developed for supporting the existing applications in the electric equipment laboratory of the department of electrical engineering is Windows-based and it is open to improvement and these are its most superior sides. The students taking the course of electrical equipment laboratory course can use the program freely. For the design of the program, visual C software was used and then the program was converted into exe.

PL

W pracy przedstawiono oprogramowanie dydaktyczne do badania zwarć. Przy wykorzystaniu oprogramowania może być symulowane zwarcie w obwodach dwu- i trójfazowych. Program jest dostępny dla studentów studiujących elektrotechnikę. Program opracowano wykorzystując oprogramowanie Visual C.

Słowa kluczowe

EN

computer-aided educational tool; short-circuit calculations; Visual C

PL

narzędzia dydaktyczne; prądy zwarcia; oprogramowanie Visual C

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2010
• Tom: R. 86, nr 12
• Strony: 357--359
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Oner Y.

autor

Kart S.

• Pamukkale University,

Bibliografia

• [1] M.B. McGroth and J.R. Brown, Virtual learning for science and engineering, IEEE Comput Graph Appl 25 (2005), 56-63.
• [2] A. Jonathan and J.T. Cristopher, An interactive learning environment for VLSI design, Ptoc IEEE 88 (2000), 96-106.
• [3] Ubell, Engineers turn to e-learning, IEEE Spectr 37, (2000), 59-61.
• [4] M.A. Akcayol, A Cetin, and C. Elmas, An educational tool for fuzzy logic-controlled BDCM, IEEE Trans Educ 45 (2002), 33-42
• [5] C. Gencer, M. Gedikpinar, A computer-aided educational tool for induction motors, Comput Appl Eng Educ, in pres, DOI 10.1002/cae.20418
• [6] Y. Saner, Power distribution-Short circuit calculations, Birsen pres, Istanbul, 2000.
• [7] IEC-60909 Short circuit current calculation in three-phase AC systems
• [8] IEC-60865-1 Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods,
• [9] I. Kasikci, Short Circuits in Power Systems A Practical Guide to IEC 60909, Wiley-VCH, 2002
• [10] T.S. Kart, Fault current in three-phase system with visual c program to calculate, Pamukkale University, Electrical&Electronic Engineering, BSc Thesis, 2007