PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Simulation of Electromagnetic Disturbances in Uninterruptible Power Supplies Using Hybrid Numerical Methods

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Symulacja zakłóceń elektromagnetycznych źródeł zasilania bezprzerwowego z zastosowaniem hybrydowych metod numerycznych
Języki publikacji
EN
Abstrakty
EN
In this paper the Electromagnetic disturbances and susceptibility of metallic enclosures which are used in shielding of high voltage industrial power supplies have been studies. Basic parameters in shielding design for uninterruptible power supplies which is important in EMC considerations, have been investigated. The aperture size and position and the distance between two shielded power supplies and their effects on electromagnetic parameters such as electric field intensity, shielding effectiveness, return loss, and resonant modes have been studied. This study is performed by using a new hybrid simulation method that utilizes TLM modelling in near field and Method of Moment in far field.
PL
W artykule przeanalizowano zakłócenia elektromagnetyczne, podatność metalowej obudowy oraz parametry ekranowania źródeł zasilania bezprzerwowego na podstawie nowej metody hybrydowej z zastosowaniem metod TLM w strefie bliskiej oraz MoM dla pola dalekiego.
Rocznik
Strony
189--191
Opis fizyczny
Bibliogr. 10 poz., il., schem., tab.
Twórcy
autor
Bibliografia
  • [1] M. P. Robinson, T.M. Benson, C. Christopoulos, J.F. Dawson, M.D. Ganley, A.C. Marvin, S.J. Porter, and D.W.P. Thomas, "Analytical formulation for shielding effectiveness of enclosures with apertures", IEEE Trans. Electromagnetic Compatibility, vol. EMC-40, no. 3, pp. 240-248, 1998.
  • [2] G. Cerri, R. D. Leo and V. M. Primiani, "Theoretical and experimental evaluation of the electromagnetic radiation from apertures in shielded enclosures", IEEE Transaction on Electromagnetic Compatibility, vol. EMC-34, no. 4, pp. 423-432, November 2000.
  • [3] M. Edrisi, "A Modeling Technique for Electromagnetic Compatibility of Enclosures in System Integration and Performance Analysis", Ph.D. Dissertation, University of South Australia, March 2000.
  • [4] C. Christopoulos, "Application of the TLM method to equipment shielding problems", IEEE International Symposium on Electromagnetic Compatibility, vol. 1, pp. 188-193.
  • [5] B. Archambeault and O. Ramahi, "Evaluating Tools which Predict the Shielding Effectiveness of Metal Enclosures Using a Set of Proposed Standard EMI Modeling Problems", IEEE International Symposium on Electromagnetic Compatibility, vol. 1, pp. 517-521, 2002.
  • [6] P. Sewell, J. D. Turner, M. P. Robinson et al, “Comparison of Analytic, Numerical and Approximate Models for Shielding Effectiveness with Measurement”, 151 IEE Proceedings – Science, Measurement and Technology, vol. 145, no. 2, pp. 61-66, March 2003.
  • [7] Zhizhang Chen, Ney, M.M., "On the Relationship Between the Time-Domain and Frequency-Domain TLM Methods", IEEE Antennas and Wireless Propagation Letters, pp. 46 – 49, Vol. 7, 2008.
  • [8] Johns, D., Centola, F., Shusterman, B. , "TLM Simulation of RF Emissions and Confirmation of Results through Testing", IEEE International Symposium on Electromagnetic Compatibility, pp. 1 – 4, 9-13 July 2007.
  • [9] Ozyalcin, M.O., Akleman, F. Sevgi, L., "A novel TLM-based time-domain wave propagator", IEEE Transactions on Antennas and Propagation, pp. 1679 – 1680, Vol. 51 , Issue 7, July 2003.
  • [10] Min Li, Joe Nuebel, James L. Drewniak, Richard E. DuBroff, Todd H. Hubing, Thomas P. Van Doren, "EMI from Cavity Modes of Shielding Enclosures—FDTD Modeling and Measurements", IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, VOL. 42, NO. 1, FEBRUARY 2000.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPOH-0069-0024
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.