Operational comparison of a new FACTS controller (RHFC) with other FACTS devices considering modified steady-state model

• Autorzy: Kazemi A. , Rezaeipour R. , Tayebi M.

Warianty tytułu

PL

Zastosowanie nowego kontrolera RHFC do optymalizacji przepływu mocy w systemie energetycznym

• Języki publikacji: EN

Abstrakty

EN

In this paper, optimal power flow (OPF) is applied to optimally locate Rotary Hybrid Flow Controller (RHFC) and three other Flexible AC Transmission System (FACTS) devices to optimize the total fuel cost, power losses and system loadability as objective functions. The steady-state model of FACTS controllers are developed as a power injection model. A quantitative comparison of them are also investigated from economical and technical point of view. Simulations are performed on IEEE 14-bus and 118-bus test systems using Matlab and GAMS software environments.

PL

W artykule opisano strategię optymalnego przepływu mocy OPF uzyskaną przez zastosowanie układu RHFC (Rptary Hybrid Flow Controller) oraz urządzeń systemu FACTS. Osiągnięto optymalne: koszt paliw, straty mocy i obciążalność.

Słowa kluczowe

EN

Rotary Hybrid Flow Controller; RHFC; flexible AC transmission system (FACTS); FACTS; optimal location; power injection model

PL

RHFC; FACTS; optymalizacja

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2012
• Tom: R. 88, nr 7a
• Strony: 54--58
• Opis fizyczny: Bibliogr. 10 poz., schem., tab.

Twórcy

autor

Kazemi A.

autor

Rezaeipour R.

autor

Tayebi M.

• Centre of Excellence for Power Systems Automation and Operation, Department of Electrical Engineering, Iran University of Science and Technology, Narmak, Tehran, Iran,

Bibliografia

• [1] Hingorani NG, Gyugyi L., Understanding FACTS: concepts and technology of flexible AC transmission systems, New York: Wiley IEEE Press, 2000
• [2] Gerbex S., Cherkaoui R., Germond A. J., Optimal Location of Multi-Type FACTS Devices in a Power System by Means of (GA) Genetic Algorithms, IEEE Trans. Power Syst, 16(2001), No.3, 537-544.
• [3] Lashkarara A., Kazemi A., Nabavi Niaki SA., Optimal location of hybrid flow controller considering modified steady-state model. Applied Energy,88(2011), No.5,1578-1585
• [4] Sirjani R., Mohamed A., Shareef H., Optimal Placement and sizing of Static Var using improved harmony search algorithm, Przeglad Elektrotechniczny, 7(2011)
• [5] Noroozian M., Andersson G., Power Flow Control by Use of Controllable Series Components, IEEE Trans. Power Del., 8(1993), No.3, 1420-1429
• [6] Iravani M. R., Dandeno P. L., Maratukulam D., Applications of Static Phase Shifters in Power Systems, IEEE Trans. Power Del. 9(1994), No.3, 1600-1608
• [7] Noroozian M., Angquist., Ghandhari M., Andersson G., Use of UPFC for optimal power flow control, IEEE Trans. Power Del., 12(1997), No.4, 1629-1634
• [8] Nabavi Niaki S.A., Iravani R., Noroozian M., Power-Flow Model and Steady-State Analysis of the Hybrid Flow Controller. IEEE Trans. Power Syst Del., 23(2008), No.4, 2330–2338
• [9] Rezaeipour R., Kazemi A., Introducing and Modelling of Rotary Hybrid Flow Controller: a new concept of Flexible AC Transmission System (FACTS) controller, Energy Conversion and Management, 2010(submitted for publication).
• [10] Power systems test case archive. U niversity of Washington http://www.ee.washington.edu/research/pstca>