Estimation of tolerance bands of S-N curve

• Autorzy: Kohout J. , Věchet S. , Zapletal J.
• Konferencja: Metody oceny struktury oraz własności materiałów i wyrobów/sympozjum ( XXII ; 6-8.XI.2007 ; Svratka, Czechy)
• Języki publikacji: EN

Abstrakty

EN

A precise determination of tolerance bands of S-N curves is very difficult problem; therefore simple approximate constructions of these bands are often used. Castillo et al. suggested sophisticated and at the same time easy procedure for their estimation which, however, is based on a special type of regression function for describing S-N curve. This type of regression function called the Castillo function is suitable only for high-cycle fatigue region close to fatigue limit. The paper focuses on the Kohout and Vechet function with wider usability applied in the Castillo procedure.

Słowa kluczowe

EN

S-N curves; tolerance bands; Castillo function; Castillo procedure

• Wydawca: Oficyna Wydawnicza Politechniki Opolskiej
• Czasopismo: Zeszyty Naukowe. Mechanika / Politechnika Opolska
• Rocznik: 2007
• Tom: Vol. 321, z. 89
• Strony: 29--30
• Opis fizyczny: Bibliogr. 12 poz., wykr.

Twórcy

autor

Kohout J.

autor

Věchet S.

autor

Zapletal J.

• University of Defence, Brno, Brno University of Technology, Brno

Bibliografia

• [1] CASTILLO E., FERNÁNDEZ-CANTELI A. and HADI A.S.: On fitting a fatigue model to data. Int. J. Fatigue, 1999, 21, pp. 97-106.
• [2] CASTILLO E. and FERNÁNDEZ-CANTELI A.: A general regression model for lifetime evaluation and prediction. Int. J. Fracture, 2001, 107, pp. 117-137.
• [3] CASTILLO E., FERNÁNDEZ-CANTELI A., HADI A.S. and LÓPEZAENLLE M.: A fatigue model with local sensitivity analysis. Fatigue Fract. Engng Mater. Struct., 2007, 30, pp. 149-168.
• [4] WEIBULL W.: Fatigue Testing and Analysis of Results. London, Pergamon Press 1961.
• [5] KOHOUT J. and HAJN M.: Statistical distributions of the sets of mechanical test results. Materials Engineering, 2005, 12, No 1, pp. 19-24. ISSN 1335-0803. (in Czech).
• [6] KOHOUT J. and HAJN M.: Different procedures for the determination of parameters of three-parameter Weibull distribution. In Proceedings of seminar Brittle Fracture 2004. Brno, Institute of Physics of Materials, Academy of Sciences of the Czech Republic 2004, pp. 103-112. ISBN 80-239-3646-8. (in Czech).
• [7] KOHOUT J. and HAJN M.: Determination of parameters of three-parameter Weibull distribution using MS Excel. In Proceedings of XXIII International Colloquium on the Management of the Educational Process (on CD), Brno, University of Defence 2005, 10 p. ISBN 80-85960-92-3. (in Czech).
• [8] ŽARNOVICAN J. and BLANÁRIK M.: To the three-parameter Wiebull distribution. Electrical horizon, 1987, 76, No 1, pp. 43-45. ISSN 0013-5798. (in Slovak).
• [9] KOHOUT J. and VECHET S.: New regression functions for S-N curves. In Proceedings of Summer School of Materials Fatigue’96. Žilina, VŠDS 1996, pp. 168-173. ISBN 80-7100-346-8. (in Czech).
• [10] KOHOUT J. and VECHET S.: A new function for description of fatigue curves and its multiple merits. Int. J. Fatigue, 2001, 23, pp. 175-183.
• [11] VECHET S., KOHOUT J. and BOKUVKA O.: Fatigue Properties of Nodular Cast Iron. Žilina, EDIS 2001. ISBN 80-7100-910-5 (1st edition). Žilina, EDIS 2002. ISBN 80-7100-973-3 (2nd edition). (both in Czech).
• [12] ZAPLETAL J., VECHET S., KOHOUT J. and OBRTLÍK K.: Fatigue lifetime of austempered cast iron. Zeszyty naukowe, Nr 318/2006, Seria Mechanika, z. 88, Opole, Politechnika Opolska 2006, pp. 219-222. ISSN 1429-6065. (in Czech).