PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Determination of chemical composition of Ni-SiO2 nanocomposites

Identyfikatory
Warianty tytułu
Konferencja
Metody oceny struktury oraz własności materiałów i wyrobów/sympozjum ( XXII ; 6-8.XI.2007 ; Svratka, Czechy)
Języki publikacji
CS
Abstrakty
EN
Nanostructured materials have been noted a massive scientific progress and industry development over the last few decades. The nanostructured materials can be produced from ceramics, metals, polymers, etc. The nanocomposites are the one type of nanomaterials. The nanocomposites with metal matrix and nanoparcicles coating have been prepared by means of electrodeposition process. The chemical composition is one of the most important factors for prediction of mechanical and physical properties of nanomaterials. The polycrystalline nickel reinforced by SiO2 nanoparticles was synthesized by electrodeposition method. The chemical composition of Ni-SiO2 nanocomposite was studied by two different methods. The Scanning Electron Microscopy fitted with by EDX detector and Atomic Absorbance Spectroscopy was used for determination of exact content of SiO2 in nanocomposite. The sample preparation was provided by microwave-assisted digestion.
Rocznik
Strony
15--15
Opis fizyczny
Bibliogr. 4 poz., il., tab., wykr.
Twórcy
autor
  • Brno University of Technology, Faculty of Mechanical Engineering, Czech Republic, Brno University of Technology, Faculty of Chemistry, Czech Republic
Bibliografia
  • [1] BHUSHAN, BHARAT: Springer handbook of nanotechnology, Springer-Verlag Berlin Heidelberg, 2004, ISBN: 978-3-540-01218-4.
  • [2] WINAND R.: Electrodeposition of metals and alloys—new results and perspectives, Electrochimica Acta, 39, 8/9 (1994),.1091-1105.
  • [3] KOHLER M., FRITZSCHE W.: Nanotechnology, WILEY-VCH VERLAG GMBH&CO, 2004, ISBN: 3-527-30750-8.
  • [4] CIHLÁROVÁ P.: Mikrostruktura a vlastnosti nanostrukturních povlaku. Brno 2007, 72 s. Disertacní práce na Fakulte Strojního Inženýrství Vysokého Ucení Technického v Brne, Ustavu Materiálových Ved a Inženýrství. Vedoucí disertacní práce prof. ing. Jirí Švejcar, CSc.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPOG-0034-0002
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.