PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Metallographic evaluation of redistribution of the carbon, iron, nickel, and chromiumin the weld joints of steels

Identyfikatory
Warianty tytułu
Konferencja
Metody oceny struktury oraz własności materiałów i wyrobów/Sympozjum(XX;07-09.12.2005;Ustroń-Jaszowiec,Polska)
Języki publikacji
CS
Abstrakty
EN
This contribution deals with study of weld joints of carbon and austenite Cr-Ni steels and the diffusion of carbon, aluminiím, iron, chromium and nickel in depence on time and temperature of anneal. The strengthening process affected by diffusion of elements were evaluated by measurements of microhardness over the interface of weld joints and were established by means of metallographic microscope.
Słowa kluczowe
EN
Rocznik
Tom
Strony
221--224
Opis fizyczny
Bibliogr. 2 poz., tab., wykr.
Twórcy
autor
  • Brno University of Technology, Faculty of Mechanical Engineering, Institute of Materials Engineering, Czech Republic
autor
  • Brno University of Technology, Faculty of Mechanical Engineering, Institute of Materials Engineering, Czech Republic
  • Brno University of Technology, Faculty of Mechanical Engineering, Institute of Materials Engineering, Czech Republic
Bibliografia
  • [1] HODIS, Z.: Difuze hliniku, chrómu, zeleza, niklu a uhliku ve svarovych spojich oceli. Brno, 2005.91 s. Diplomova prace na FSI VUT v Brne Ustavu materialoveho inzenyrstvi. Vedouci diplomove prace prof. Ing. Karel Stransky, DrSc.
  • [2] DOLEZAL, P., STRANSKY, K., TOMANDL, R.: Metallographic Evalution of the Carbon Redistribution in the Weld Joints of Steels. In Zeszyty naukowe, Politechnika Opolska: Mechanika, Metody oceny struktury oraz własności materiałów i wyrobów. Nr. 290/2003, z. 76, Opole 2003. Ed. Politechnika Opolska, 2003, pp. 353 - 356. ISSN 1429-6055.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPOG-0001-0058
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.