Formablility of magnesium alloy AZ91

• Autorzy: Čížek L. , Greger M. , Pawlica L. , Hubáčková J. , Kiełbus A.

Warianty tytułu

PL

Tvařitelnost hořčíkové slitiny AZ91

• Konferencja: Metody oceny struktury oraz własności materiałów i wyrobów / sympozjum (XVIII ; 25-27.11.2003 ; Svratka, Czechy)
• Języki publikacji: EN

Abstrakty

EN

Magnesium alloys are primarily used in aeronautical and automotive industries and they are characterised by wide variety of structural characteristics because of their favourable combination of tensile strength 160 to 365 MPa and low density (1740 kg/m3). Some technological aspects of production of selected magnesium forming alloys are presented in the first part of this paper. Experimental part studies the possibility of forming of the magnesium alloys AZ91 and presents the structure and mechanical properties of these alloys.

Słowa kluczowe

EN

magnesium alloy AZ91

• Wydawca: Oficyna Wydawnicza Politechniki Opolskiej
• Czasopismo: Zeszyty Naukowe. Mechanika / Politechnika Opolska
• Rocznik: 2003
• Tom: z. 76
• Strony: 51--56
• Opis fizyczny: Bibliogr. 4 poz., rys., tab.

Twórcy

autor

Čížek L.

• VŠB - Technical University of Ostrava, Czechy

autor

Greger M.

• VŠB - Technical University of Ostrava, Czechy

autor

Pawlica L.

• VŠB - Technical University of Ostrava, Czechy

autor

Hubáčková J.

• VŠB - Technical University of Ostrava, Czechy

autor

Kiełbus A.

Bibliografia

• [1] ASM Specialty Handbook- Magnesium and Magnesium Alloys, ed. Avedesian, M.M.and Baker, H., ASM International, USA, 1999, pp. 3-84.
• [2] Magnesium Alloys and their Application, ed. Kainer, K.U., Sb. Int. Congress Magnesium Alloys and their Application, Mnichov, 2000, pp.3-8, 534-608.
• [3] PTACEK, L., Slitiny horciku - soucasny stav vyvoje a pouziti [Magnesium alloys - present state of development and utilisation], In Proceedings from the Conference METAL 2001. Ostrava : Tanger, 2001, pp. 1-12.
• [4] CIZEK, L., et al., Structure and Properties of the Selected magnesium Alloys, In Proceedings from the Conference Achievements in Mechanical and Materials Engineering, ed. L. A. Dobrzanski, Gliwice, 2001, pp. 75-78.