Determination of crack propagation angle for surface crack subjected to lubricated contact conditions

• Autorzy: Zafošnik B. , Mishuris G. , Ren Z. , Flašker J.
• Konferencja: Konferencja mechaniki pękania / sympozjum (X ; 11-14.09.2005 ; Opole-Wisła, Polska)
• Języki publikacji: EN

Abstrakty

EN

The paper describes the role of different terms in asymptotic expansion of the stress field around surface crack tip under lubricated contact conditions. The maximum tangential stress (MTS) crack propagation criterion is modified to account for the influence of internal pressure along the crack surfaces due to trapped fluid. The developed model is used to simulate surface crack growth on a gear tooth flank. Comparison with experimental results shows that the modified MTS criterion predicts the kink angle more accurately than the original criterion.

Słowa kluczowe

EN

stress field; surface crack

• Wydawca: Oficyna Wydawnicza Politechniki Opolskiej
• Czasopismo: Zeszyty Naukowe. Mechanika / Politechnika Opolska
• Rocznik: 2005
• Tom: z. 82
• Strony: 219--226
• Opis fizyczny: Bibliogr. 9 poz., rys., wykr.

Twórcy

autor

Zafošnik B.

• University of Maribor, Slovenia

autor

Mishuris G.

• Politechnika Rzeszowska, Polska

autor

Ren Z.

• University of Maribor, Slovenia

autor

Flašker J.

• University of Maribor, Slovenia

Bibliografia

• [1] SCHEDL U.: EinfluB des Schmierstoffs auf die Grubchenlebensdauer einsatzgeharteter Zahnrader, Dissertation, TU Munchen, Fakultat fur Maschinenwessen, Munchen, 1998, (in German)
• [2] ERDOGAN F., SIH G. C: On the crack extension in plates under plane loading and transverse shear, ASME Journal of Basic Engineering 85, 1963, pp. 525-527
• [3] PARTHEYMULLER P.: Numerische simulation der 3D-Ri6ausbreitung mit der Randelementmethode, Fortschritt-Berichte VDI 18 (242), Dusseldorf: VDI Verlag, 1999, (in German)
• [4] ZAFOSNIK B.: Energy model for prediction of surface crack propagation on gear flanks, Dissertation, Maribor, Slovenia, 2004, (in Slovene)
• [5] LARSSON S. G, CARLSSON A. J.: Influence of non-singular stress terms and specimen geometry on small-scale yielding at cracktip in elastic-plastic solids, Journal of Mechanics and Physics of Solids 21,1973 pp. 263-277
• [6] LIM I. L., JOHNSTON I. W., CHOI S. K.: Comparison between various. displacement-based stress intensity factor computation techniques, International Journal of Fracture 58, 1992, pp. 193-210
• [7] JOHNSON K. L.: Contact mechanics, Cambridge University Press, 1994
• [8] SEWERYN A.: A non-local stress and strain energy release rate n mode fracture initiation and propagation criteria, Engineering Fracture Mechanics 59(6), 1998, pp. 737-760
• [9] KANETA M., MURAKAMI Y.: Effect of oil hydraulic pressure on surface crack growth in rolling/sliding contact, Tribology International 20 1987, pp. 210-217