PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Zastosowanie nadprzewodników w elektromagnesach reaktora termojądrowego

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Application of superconductors to thermonuclear reactor magnets
Języki publikacji
PL
Abstrakty
PL
W pracy przedstawiono układ elektromagnesów nadprzewodnikowych reaktora ITER ze szczególnym uwzględnieniem zastosowania przewodów z nadprzewodników niskotemperaturowych. Rozważono również możliwość zastosowania nadprzewodników wysokotemperaturowych w reaktorach następnej generacji.
EN
In this paper, the magnetic system of the ITER reactor is depicted with some issues concerning application of the low temperature (LTS) superconducting strands. Applicability of the high temperature superconductors (HTS) desirable for use in the next generation fusion reactors is also considered.
Rocznik
Strony
162--165
Opis fizyczny
Bibliogr. 16 poz., rys., tab., wykr.
Twórcy
autor
  • Politechnika Lubelska, Instytut Podstaw Elektrotechniki i Elektrotechnologii, ul. Nadbystrzycka 38a, 20-618 Lublin, p.surdacki@pollub.pl
Bibliografia
  • [1] Green B. J., The European Fusion Research and Development Programme and the ITER Project, Journal of Physics: Conference Series 44 (2006) 1-9
  • [2] Magaud P., Nuclear Fusion Reactors, Encyclopedia of Energy (2004) 365-381
  • [3] Surdacki P., Fusion reactors for future power generation, International Conference ELMECO-5 “Electromagnetic Devices and Processes in Enviroment Protection”, Nałęczów, Sept. 2005, Conference Proceedings, 279-284
  • [4] Komarek P., Salpietro E., Review of European Activities in Superconductivity for Thermonuclear Fusion, in the Light of ITER, IEEE/CSC & ESAS European Superconductivity News Forum, 4 (2008), 1-16
  • [5] Bessette D., Conductors of the ITER Magnets, IEEE Trans. on Applied Superconductivity, 11, 1 (2001) 1550-1553
  • [6] Turck B., Six years of operating experience with Tore Supra, the largest Tokamak with superconducting coils, IEEE Transactions on Magnetics, 32 (1996) 4, 2264-2267
  • [7] Sborchia C., Status of ITER Magnet Design and Model Coils, IEEE Trans. on Applied Superconductivity, 10 (2000) 1, 554-559
  • [8] Salpietro E., Status of the ITER magnets, Superconductor Science and Technology 19 (2006) S84-S89
  • [9] Mitchell N., Bessette D., Gallix R., Jong C., Knaster J., Libeyre P., Sborchia, C., Simon F., The ITER Magnet System, IEEE Transactions on Applied Superconductivity, 18 (2008) 2, 435-440
  • [10] ITER Technical Basis, http:///www.iter.org/magnets.htm
  • [11] Libeyre P., Ciazynski D., et al., New results and remaining issues in superconducting magnets for ITER and associated R&D in Europe, IAEA Fusion Energy Conference, Chngdu, China, 16-21 Oct. 2006, IT/2-1Ra
  • [12] Libeyre P., Bareyt B., Benfatto I., Bessette D., Gribov Y., Mitchell N., Sborchia C., and Simon F., Electrical Design Requirements on the ITER Coils, IEEE Trans. on Applied Superconductivity, 18 (2008) 2, 479-482
  • [13] Selvamanickam V., Chen Y., Xiong X., Xie Y. Y., Reeves J. L., Zhang X. et al., Recent progress in second-generation HTS conductor scale-up at SuperPower, IEEE Transactions on Applied Superconductivity, 17 (2007), 2, 3231-3234.
  • [14] Janeschitz G., Heller R., et al., High Temperature Superconductors for Future Fusion Magnet Systems – Status, Prospects and Challenges, IAEA Fusion Energy Conference, Chngdu, China, 16-21 Oct. 2006, IT/2-2
  • [15] Janeschitz G., Boccaccini L., Fietz W.H., Goldacker W., Ihli T., Meyder R., Moeslang A., Norajitra P., Development of fusion technology for DEMO in Forschungszentrum Karlsruhe, Fusion Engineering and Design 81 (2006) 2661–2671
  • [16] Goldacker W., Nast R., Kotzyba G., Schlachter S. I., Frank A., Ringsdorf B. et al., High current DyBCO-ROEBEL assembled coated conductor (RACC), Journal of Physics: Conference Series, 43 (2006), 1, 901-904
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPOC-0053-0028
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.