Vector magneto-hysteretic E&SS model for magnetic characteristic analysis

• Autorzy: Enokizano M. , Schimoji H. , Ikariga A.

Warianty tytułu

PL

Analiza charakterystyki magnetycznej maszyn elektrycznych przy użyciu modelu wektorowego histerezy E&SS

• Języki publikacji: EN

Abstrakty

EN

This paper deals how to grasp and use the accurate magnetic property of the electrical steel sheet and so on. The magnetic property is called "vector magnetic property", which means the relationship between the magnetic flux density vector B and the magnetic field strength vector H. Therefore the vector magnetic property shows non-linearity of not only in amplitude but also in the spatial phase difference angle ?BH between the vector H and the vector B. In order to express the relation, "E&SS model" as engineering model has been proposed, which can introduce to the numerical simulation technique such as the finite element method. This method is useful for the development of the highly efficiency electrical machines using the highly quality electrical steel sheets.

Słowa kluczowe

EN

electrical machines; analysis of magnetic field

PL

maszyny elektryczne; analiza magnetyczna

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2003
• Tom: R. 79, nr 10
• Strony: 671--676
• Opis fizyczny: Bibliogr. 10 poz., rys., wykr.

Twórcy

autor

Enokizano M.

• Department of Electrical and Electronic Engineering, Faculty of Engineering, Oita University, Oita, Japan

autor

Schimoji H.

• Department of Electrical and Electronic Engineering, Faculty of Engineering, Oita University, Oita, Japan

autor

Ikariga A.

• Department of Electrical and Electronic Engineering, Faculty of Engineering, Oita University, Oita, Japan

Bibliografia

• [1] M. Enokizono, : Two-Dimensional Magnetic Properties, Trans IEE of Japan. Vol. 115-A No. 1 (1995), 1-8
• [2] M. Enokizono, M. Morikawa, K. Kawamura, J. Sievert: Distribution of Two-dimensional Magnetic Properties in Threephase Induction Motor Model Core, IEEE Transactions on Magnetics. Vol. 32 No. 5 (1996), 4989-4991
• [3] M. Enokizono, I. Tanabe: Studies on a New Simplified Rotational Loss Tester, IEEE Transactions on Magnetics, Vol. MAG-33 No. 5 (1997), 4020-4022
• [4] M. Enokizono, S. Mori, S. O. Benda.: A Treatment of the Magnetic Reluctivity Tensor for Rotating Magnetic Field, IEEE Transactions on Magnetics, Vol. MAG-33 (1997), 1608-1611
• [5] M. Enokizono, N. Soda.: Iron Loss Analysis of Transformer Core Model by FEM Considering Vector Magnetic Properties, IEEE Transactions on Magnetics, Vol. MAG-35 No. 5 (1999), 3008-3011
• [6] N. Soda, M. Enokizono,“Improvement of T-Joint Part Constructions in Three-Phase Transformer Cores by Using Direct Loss Analysis with E&S Model”, IEEE Transactions on Magnetics, Vol. MAG-36, No.4, pp.1285-1288, 2000.7
• [7] M. Enokizono, N. Soda,“Iron Loss Analysis of Transformer Core Model by FEM Considering Vector Magnetic Properties”,IEEE Transactions on Magnetics, Vol. MAG-35, No.5, pp.3008-3011, 1999.9
• [8] M. Enokizono, T. Miyazaki,“Study on Torque Improvement of Single-Phase Induction Motor by using FEM”,IEEE Transactions on Magnetics, Vol. MAG-35, No.5, pp..3703-3706, 1999.9
• [9] M. Enokizono. M. Morikawa, K. Kawamura, J. Sirvert, ”Distribution of Two-Dimensional Magnetic Properties in Three-Phase Induction Motor Model Core”, IEEE Transaction on Magnetics, Vol. MAG-32, No.5, pp.4989-4991, 1996
• [10] M. Enokizono, H. Amano,“Examination of the High Accuracy of E&S Modeling”,Journal of The Magnetics Society of Japan，Vol. 25，No. 4-2，pp.1107-1110, 2001.4