Static Characteristics of a Novel Low Cost Brushless DC Permanent Magnet Motor

• Autorzy: Petkovska L. , Lefley P. , Cvetkovski G.

Warianty tytułu

PL

Właściwości statyczne nowego rodzaju silnika bezszczotkowego DC z magnesami trwałymi

• Języki publikacji: EN

Abstrakty

EN

The paper presents the design attributes and static characteristics of a new 6/4 topology of a low cost brushless DC permanent magnet (BLDCPM) motor. To analyse the motor performance, steady state characteristics are obtained by using quasi-static finite element analysis (FEA). Computational results are presented in figures and tables. The analysis of the motor characteristics will be used as a reliable tool for design optimisation of this novel low cost BLDCPM motor.

PL

W artykule przedstawiono projekt nowego silnika bezszczotkowego DC z magnesami trwałymi w topologii 6/4. Do analizy właściwości silnika wykorzystano quasi-static metodę element skończonego.

Słowa kluczowe

EN

permanent magnet motor; brushless motor; FE analysis; design optimisation

PL

silnik bezszczotkowy; magnesy trwałe; właściwości statyczne

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2012
• Tom: R. 88, nr 1a
• Strony: 164--168
• Opis fizyczny: Bibliogr. 10 poz., rys., wykr.

Twórcy

autor

Petkovska L.

autor

Lefley P.

autor

Cvetkovski G.

• Cyril and Methodius University, Faculty of Electrical Engineering and IT, P. O. Box 574, 1000 Skopje, Macedonia,

Bibliografia

• [1] El-Refaie A. M., Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges, IEEE Transactions on Industrial Electronics, 57 (2010), No. 1, 107-121.
• [2] Wrobel R., Mellor P. H., Design Considerations of a Direct Drive Brushless Machine With Concentrated Windings, IEEE Transactions on Energy Conversion, 23 (2008), No. 1, 1-8.
• [3] El-Refaie A. M., Jahns T. M., Novotny D. W., Analysis of Surface Permanent Magnet Machines With Fractional-Slot Concentrated Windings, IEEE Transactions on Energy Conversion, 21 (2006), No. 1, 34-43.
• [4] Bianchi N., Bolognani S., Dai Pré M., Grez zani G., Design Considerations for Fractional-Slot Winding Configurations of Synchronous Machines, IEEE Transactions on Industry Applications, 42 (2006), No. 4, 997-1006.
• [5] Cros J., Viarouge P. Synthesis of High Performance PM Motors With Concentrated Windings, IEEE Transactions on Energy Conversion, 12 (2002), No. 2, 248-253.
• [6] Ahmed S., Lefley P. Development of a Single Phase PM BLDC Motor from a Novel Generic Model, Proceedings of 11th Spanish Portuguese Conference on Electrical Engineering 11CHLIE (2009), published on CD, pp. 1-5, Zaragoza, Spain.
• [7] Lefley P., Petkovska L., Ahmed S., Cvetkov ski G. Finite Element Analysis of a Novel Single Phase Permanent Magnet Brushless DC Motor, Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC (2010), published on CD, T4-96 – T4-101, Ohrid, Macedonia.
• [8] Cheng M., Chau K. T., Chan C. C., Static Characteristics of a New Doubly Salient Permanent Magnet Motor, IEEE Transactions on Energy Conversion, 16 (2001), No. 1, 20-25.
• [9] Petkovska L., Cvet kovs ki G., FEM Based Simulation of Permanent Magnet Synchronous Motor Performance Characteristics, Proceedings of CES/IEEE 5th International Power Electronics and Motion Control Conference IPEMC (2006), Vol. 1/3, 254-258, Shanghai, China.
• [10] Ionel D. M., Popescu M., McGilp M. I., Miller T. J. E., Dellinger S. J., Assessment of Torque Components in Brushless Permanent Magnet Machines Through Numerical Analysis of the Electromagnetic Field, IEEE Transactions on Industry Applications, 42 (2005), No. 4, 1149-1158.