A communication backbone for Substation Automation Systems based on the OMG DDS standard

• Autorzy: Calvo I. , García de Albéniz O. , Pérez F.

Warianty tytułu

PL

Szkielet komunikacyjny systemu SAS bazujący na standardzie OMG DDS

• Języki publikacji: EN

Abstrakty

EN

Today’s Substation Automation Systems (SAS) are formed by diverse microprocessor-based devices that carry out several operations such as metering, monitoring, protection and actuation. Standards, such as IEC61850, aim at providing abstract component-based solutions that improve scalability and ease the replacement of the devices. This paper discusses the different types of communication traffic identified in this standard and proposes a mapping to use the recent OMG Data Distribution Service (DDS) standard as communication backbone in SAS.

PL

Podstacje system automatycznego SAS są sterowane przy wykorzystaniu układów mikroprocesorowych zapewniających pomiar, zabezpieczenie i zadziałanie układów wykonawczych. Wymianę kompenentów ułatwia standard IEC61850. W artykule analizowano różne typy komunikacji w ramach tego standardu oraz zaproponowano system DDS (Data Distribution Service) jako szkielet system SAS.

Słowa kluczowe

EN

IEC 61850; real-time communications; Data Distribution Service

PL

IEC 61850; komunikacja w czasie rzeczywistym

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2012
• Tom: R. 88, nr 1a
• Strony: 146--150
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Calvo I.

autor

García de Albéniz O.

autor

Pérez F.

• niversity College of Engineering of Vitoria-Gasteiz (UPV/EHU), C/Nieves Cano, 12, 01006, Vitoria- Gasteiz, SPAIN,

Bibliografia

• [1] Kezunovic, M., “Future trends in protective relaying, substation automation, testing and related standardization” Transmission and Distribution Conference and Exhibition 2002: Asia Pacific. IEEE/PES, Vol. 1, 6-10 Oct. 2002 pp. 598 - 602
• [2] IEC TC-57. Communication Networks and Systems in Substations – Part 7-1: Basic communication structure for substation and feeder equipment – Principles and models. International Standard 61850-7-1. IEC 2003
• [3] Calvo, I., Marcos, M., Orive, D., Huidobro, A., “Object-oriented based architecture for accessing remotely electrical protection relays”, Proc. of the IEEE ETFA03 Conference, 2003, Volume 2, 16-19 Sept, 2003, pp. 614 – 621
• [4] Skeie, T., Johannessen, S., Holmeide, O., “Timeliness of realtime IP communication in switched industrial Ethernet networks”, IEEE Transactions on Industrial Informatics, Vol. 2, No. 1., pp. 25-39 Feb. 2006
• [5] OMG, Object Management Group, “Data Distribution Service for Real-time Systems”, v1.2, June 2007.
• [6] Ozansoy, C.R., Zayegh, A., Kalam, “Interoperable CORBA Middleware Design for Substation Communication Systems”, 8th IEE International Conference on Developments in Power System Protection, April 2004, pp. 705-708.
• [7] Sanz, R., “Embedding Interoperable Objects in Automation Systems”, Proc. of the IEEE 28th Annual Conference of the Industrial Electronics Society (IECON02), Nov. 2002, pp. 2261- 2265
• [8] Hossenlopp, L., “Engineering Perspectives on IEC 61850”, IEEE Power & Energy Magazine, May/June 2007, pp. 45-50
• [9] Calvo, I., Garcia de Albéniz, O., Noguero A., Pérez, F., “Towards a Modular and Scalable Design for the Communications of Electrical Protection Relays”, Proc. of the IEEE 35th Annual Conference of the Industrial Electronics Society (IECON09), Nov. 2009, pp. 2511 – 2516.
• [10] J. Lopez-Vega, J. Povedano-Molina, J. Sanchez-Monedero, and J.M. Lopez-Soler, “Políticas de QoS en una Plataforma de Trabajo Colaborativo sobre Middleware DDS”, XIII Jornadas de Tiempo Real JTR2010, February 2010.
• [11] G. Pardo-Castellote, B. Farabaugh, and R. Warren, “An introduction to DDS and Data-Centric Communications”, 2005 Available at http://www.omg.org/news/whitepapers/Intro_To_DDS.pdf.
• [12] I. Calvo, F. Pérez, I. Etxeberria, and G. Morán, “Control Communications with DDS using IEC61499 Service Interface Function Blocks”, IEEE Conference on Emerging Technologies and Factory Automation (ETFA), pp. 1 – 4, Bilbao, Spain, 13-16 Sept. 2010. DOI: 10.1109/ETFA.2010.5641207.
• [13] IEC TC-57. Communication networks and systems in substations – Part 7.2: Basic communication structure for substation and feeder equipment – Abstract Communication Service Interface (ACSI). International Standard 61850-7-, IEC 2003
• [14] IEC TC57. Communication Networks and Systems in Substations- Part 8-1: Specific Communication Service Mapping (SCSM) – Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8892-3, International Standard 61850- 8-2. IEC 2004
• [15] Mackiewicz, R., “Overview of IEC 61850 and Benefits”, Transmission and Distribution Conference and Exhibition, 2005/2006 IEEE PES, May, 2006, Dallas, USA, 21-24 May, pp. 376-383