Tytuł artykułu
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Nowy energooszczędny system zasilania lamp fluoroscencyjnych
Języki publikacji
Abstrakty
Energy efficiency is one of the most important design requirements for current lighting systems. Retrofitting old buildings with saving energy lighting systems is still unattractive due to economic troubles, such as the high cost of new devices and global rewiring. Though, the advantages offered by wireless sensor networks, propose them as a profitable solution. This paper presents a wireless networked lighting system designed over fluorescent lighting to minimize retrofitting efforts and energy costs. The developed system has been tested over a real deployment of lighting loads. Power consumption is reduced up to 80% of nominal conventional fluorescent tube consumption.
Skuteczność energetyczna jest ważnym parsmetrem zasilania systemów oświetleniowych. Ten problem nabiera szczególnej wagi przy wymianie instalcji w starych budynkach. Zaproponowa no nowy system oparty o sieć bezprzewodową czujników. W artykule przedstawiono taką sieć zaprojektowaną do lamp fluoroscencyjnych. Przeprowadzone testy potwierdzają 80% redukcji zużycia energi w porównaniu z systemami konwencjonalnymi.
Wydawca
Czasopismo
Rocznik
Tom
Strony
100--103
Opis fizyczny
Bibliogr. 14 poz., rys., tab.
Twórcy
autor
autor
autor
autor
- Renewable Energies Research Institute, Escuela de Ingenieros Industriales de Albacete, University of Castilla La Mancha, Albacete Science & Technology Park, C/Investigación, s/n 02071 Albacete, Spain, andres.honrubia@uclm.es
Bibliografia
- [1] R. Yozell-Epstein, “Intelligent lighting system benchmarking,” Masters Report, Department of Mechanical Engineering, UC Berkeley, 2003.
- [2] I. Azevedo, M. Morgan, and F. Morgan, “The transition to solidstate lighting,” Proceedings of the IEEE, vol. 97, no. 3, pp. 481 –510, 2009.
- [3] E. Mills, “Global lighting energy savings potential,” Light and Engineering, vol. 10, no. 4, 2002.
- [4] J.-C. Hsieh and J.-L. Lin, “Novel single-stage self-oscillating dimmable electronic ballast with high power factor correction,” IEEE Transactions on Industrial Electronics, vol. 58, no. 1, pp. 250 –262, 2011.
- [5] J. Alonso, M. Dalla Costa, M. Rico-Secades, J. Cardesin, and J. Garcia, “Investigation of a new control strategy for electronic ballasts based on variable inductor,” IEEE Transactions on Industrial Electronics, vol. 55, no. 1, pp. 3 – 10, 2008.
- [6] C. Nascimento and A. Perin, “High power factor electronic ballast for fluorescent lamps with reduced input filter and low cost of implementation,” IEEE Transactions on Industrial Electronics, vol. 55, no. 2, pp. 711 –721, 2008.
- [7] H.-H. Chung, N.-M. Ho, W. Yan, P. W. Tam, and S. Hui, “Comparison of dimmable electromagnetic and electronic ballast systems–an assessment on energy efficiency and lifetime,” IEEE Transactions on Industrial Electronics, vol. 54, no. 6, pp. 3145 –3154, 2007.
- [8] F. O’Reilly and J. Buckley, “Use of wireless sensor networks for fluorescent lighting control with daylight substitution,” Workshop on Real-World Wireless Sensor Networks, 2005.
- [9] H. Park, J. Burke, and M. Srivastava, “Design and implementation of a wireless sensor network for intelligent light control,” 6th International Symposium on Information Processing in Sensor Networks, 2007.
- [10] Y.-J. Wen and A. M. Agogino, “Wireless networked lighting systems for optimizing energy savings and user satisfaction,” Wireless Hive Network Conference, 2008.
- [11] Y. Wang and Z. Wang, “Design of intelligent residential lighting control system based on zigbee wireless sensor network and fuzzy controller,” International Conference on Machine Vision and Human-Machine Interface (MVHI), 2010.
- [12] M. Dubberley, A. Agogino, and A. Horvath, “Life-cycle assessment of an intelligent lighting system using a distributed wireless mote network,” IEEE International Symposium on Electronics and the Environment, 2004.
- [13] E. 12464-1:2002, “Light and lighting. lighting of work places. indoor work places,” 2003.
- [14] C. O’Rourke, “Dimming electronic ballasts,” National Lighting Product Information Program, vol. 7, no. 3, 1999.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPOB-0048-0020