Distributed collaborative design - a case study for mixed-signal IP core

• Autorzy: Pawlak A. , Sakowski W. , Penkala P. , Fraś P. , Grzybek S.

Warianty tytułu

PL

Projektowanie rozproszone - badanie przypadku cyfrowo-analogowego komponentu wirtualnego

• Języki publikacji: PL

Abstrakty

PL

Artykuł prezentuje zastosowanie metod inżynierii rozproszonej do projektowania warstwy fizycznej szybkiego analogowo-cyfrowego układu USB. Nowe metody współpracy inżynierów w rozproszonych zespołach projektowych pokazano na przykładzie dwóch wybranych zadań projektowych, a mianowicie: specyfikacji interfejsu analogowo-cyfrowego oraz rozproszonej syntezy i weryfikacji. Zaprezentowano model wiedzy procesu projektowania oraz model procesu zdalnego uruchamiania narzędzi. Wskazano na zalety i ograniczenia metod inżynierii rozproszonej.

EN

The paper presents application of a distributed collaborative approach to design of a mixed-signal electronic component. The approach is explained on an industrial case of the USB High Speed OTG Transceiver (PHY-physical layer) IP core design. Collaborative design style used by the distributed design team during two selected design phases, namely interface design specification, as well as distributed design and verification have been presented. This includes a distributed design workflow represented as a knowledge model and the workflow for remote tools invocation. Finally, pros and cons of the collaborative approach have been enumerated.

Słowa kluczowe

PL

inżynieria rozproszona; analogowo-cyfrowe komponenty wirtualne; zdalne uruchamianie narzędzi

EN

distributed collaborative design; mixed-signal IP component; remote tool invocation

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2010
• Tom: R. 86, nr 11a
• Strony: 111--115
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Pawlak A.

autor

Sakowski W.

autor

Penkala P.

autor

Fraś P.

autor

Grzybek S.

• Politechnika Śląska, Instytut Elektroniki, ul. Akademicka 16, Gliwice,

Bibliografia

• [1] Cutkosky M., Tenenbaum J., Glicksman J., Madefast: an exercise in collaborative engineering over the Internet, Communications of the ACM. 1996, vol. 39, no. 9.
• [2] CURE– Collaboration workspace, http://cure.sourceforge.net/
• [3] Lillehagen F., Krogstie J., Active Knowledge Modeling of Enterprises, Springer 2008, ISBN 978-3-540-79415-8.
• [4] Fraś P. et al., Collaborative infrastructure for distance - spanning concurrent engineering, PRO-VE’04, in Luis M. Camarinha-Matos (Ed.) Virtual Enterprises and Collaborative Networks, Kluwer Academic Publishers, 2004.
• [5] Pawlak A., Fraś P., Penkala P., Web services-based collaborative system for distributed engineering, PRO-VE'08, in Pervasive Collaborative Networks, Edited by Luis M. Camarinha-Matos and Willy Picard, Springer.
• [6] Chan, F.; Spiller, M.; Newton, A.R., WELD –an Environment for Web-based Electronic Design, Proc. 35th DAC, 1998.
• [7] Lavana H., Khetawat A., Brglez F., Koźmiński K.: Executable Workflows: A Paradigm for Collaborative Design on the Internet, Proc. 34th DAC, 9-13 June 1997, Anaheim.
• [8] Dalpasso M., Bogliolo A., Benini L., Specification and validation of distributed IP-based designs with JavaCAD, Proc. Conf. Design, Automation and Test in Europe (DATE), 1999.
• [9] Schattkowsky T., Mueller W., Pawlak A., Workflow Management Middleware for Secure Distance-Spanning Collaborative Engineering, In L. Fischer (ed.) The Workflow Handbook 2004, WfMC, Lighthouse Point, USA, 2004.
• [10] Johnsen S., et al., Model-based Adaptive Product and Process Engineering, in New Technologies for the Intelligent Design and Operation of Manufacturing Networks, Rabe, M.; Mihók, P. (Eds), Fraunhofer IRB Verlag, 2007.
• [11] Jørgensen H., et al., MAPPER collaborative platform of model configured services, CollABD’07, 1st Workshop on Integrated Practices for the 21st Century: Collaborative Working Environments, in Collaborative Working Environments for Architectural Design, Edited by G. Carrara, A. Fioravanti, and Y. Kalay Sapienza Univ. and Palombi Editori, Rome, 2010 (ISBN 978-88-6060-261-9).
• [11] MAPPER Report D15 “D15: Collaborative design process - model, analysis and evaluation”, http://mapper.eu.org.
• [12] Siekierska K. et al., Distributed collaborative design of IP components in the TRMS environment, Microelectronics Reliability, Elsevier Journal, vol. 46 (2006), 5-6.
• [13] Sakowski W., Grzybek Sz., Penkala P., Pawlak A., Fraś P., Mixed-signal USB IP Core Design Using Distributed Collaborative Approach, Proc. 16th Int. Conf. Mixed Design of Integrated Circuits and Systems, Łódź, 25-27.06.2009.