Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Konferencja
Międzynarodowe Sympozjum: Metody oceny struktury oraz własności materiałów i wyrobów (XXIII ; 22-24.10.2008 ; Jarnołtówek, Polska)
Języki publikacji
Abstrakty
The paper focuses on problems of optimizing the forming temperature of grade 100CrMnSi6-4 bearing steel under partial heating. In order to assess its formability, tensile tests at elevated temperatures ranging from 100 to 800 °C were carried out. Tensile diagrams revealed jump changes of mechanical properties in the brittle region under blue heat and in the region of phase transformations. Experimental examination was then concentrated on assessing the plastic deformation capability of the material under pressure at elevated temperatures, by means of the upsetting test. Another goal of the paper consisted in comparing the two experimental methods chosen for establishing the optimum temperatures of forming grade 100CrMnSi6-4 bearing steels at elevated temperatures. To have a complex assessment of the experimental material the structure and phase analyses of the bearing steel were performed in dependence on heating temperature.
Słowa kluczowe
Rocznik
Tom
Strony
65--65
Opis fizyczny
Bibliogr. 3 poz.
Twórcy
autor
autor
autor
autor
- Brno University of Technology, Faculty of Mechanical Engineering, Czech Republic
Bibliografia
- [1] FOREJT M., PÍŠKA M.: Teorie obrábení, tvárení a nástroje. Akademické nakladatelství CERM, s.r.o.,Brno.2006 , ISBN 80-214-2374-9.
- [2] ŽÍDEK M.: Metalurgická tvaritelnost ocelí za tepla a studena. ALEKO, Praha. 1995, ISBN 80-85341-45-X.
- [3] HROUZKOVÁ A.: Optimalizace teploty tvárení ložisek za poloohrevu. Brno: VUT v Brne, FSI, 2008. 37s. Vedoucí práce Ing. Pavel Doležal, Ph.D.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPOB-0029-0030