PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Quantitative evaluation of y' phase in CMSX-4 superalloy

Identyfikatory
Warianty tytułu
PL
Ilościowa ocena fazy y' w nadstopie CMSX-4
Języki publikacji
EN
Abstrakty
EN
In the present paper methodology of y' phase occurring in monocrystalline CMSX-4 superalloy evaluation and the results of these investigations carried out with two techniques on the same material. Analysis of y' phase precipitates by means of traditional quantitative metallography using image analysis (Fig. 1, 2, Tab. 1÷5) and determination of the phase concentration using Rietveld method based on X-ray diffraction analysis (Fig. 3÷5, Tab. 6) were described.
PL
W artykule zaprezentowano metodykę oceny fazy y' występującej w monokrystalicznym nadstopie CMSX-4 i wyniki tej oceny przeprowadzonej dwoma technikami na tym samym materiale do badań. Przeprowadzono analizę wydzieleń fazy y' za pomocą tradycyjnej metalografii ilościowej (rys. 1, 2, tab. 1÷5) oraz pomiar stężenia fazy y' metodą Rietvelda opartą na dyfrakcji rentgenowskiej (rys. 3÷5, tab. 6).
Rocznik
Strony
686--690
Opis fizyczny
Bibliogr. 16 poz., rys., tab.
Twórcy
autor
autor
autor
Bibliografia
  • [1] Donachie M. J., Donachie S. J.: Superalloys a technical guide. ASM International. Materials Park, Ohio (2002).
  • [2] Taşçioğlu E., Baldan A.: Effects of section-size and initial γʹ morphology on the creep behavior of a superalloy. Journal of Materials Science Letters 20 (2001)155-158.
  • [3] Zhou H., Harada H., Ro Y., Koizumi Y., Kobayashi T., Nakazawa S.: Effect of γʹ volume fraction on third-generation single-crystal superalloys. Proceedings of Materials for Advanced Power Engineering (2002).
  • [4] Cannon Muskegon Corporation http://www.c-mcgroup.com/.
  • [5] Szczotok A.: Influence of methodical factors on results of a quantitative evaluation of γʹ phase in MAR M247 superalloy. Inżynieria Materiałowa 4 (2008) 367-370.
  • [6] Szczotok A., Richter J., Cwajna J.: Stereological characterization of γʹ phase precipitation in CMSX-6 monocrystalline nickel-base superalloy. Materials Characterization 60 (2009) 1114-1119.
  • [7] Szala J.: Application of computer-aided image analysis methods for a quantitative evaluation of material structure. D.Sc. thesis, Silesian University of Technology, Katowice (2001), in Polish.
  • [8] Ryś J.: Stereologia materiałów. Fotobit Design, Kraków (1995).
  • [9] Risbet M., Feaugas X., Guillemer-Neel C., Clavel M.: Stereological characterization of the γʹ particles in a nickel base superalloy: Comparison between transmission electron microscopy and atomic force microscopy techniques. Materials Characterization 59 (2008)1252-1257.
  • [10] Wosik J., Dubiel B., Kruk A., Penkalla H. J., Schubert F., Czyrska-Filemonowicz A.: Stereological estimation of microstructural parameters of nickel-based superalloy Waspaloy using TEM methods. Materials Characterization 46 (2001) 119-123.
  • [11] Penkalla H. J., Wosik J., Czyrska-Filemonowicz A.: Quantitative microstructural characterisation of Ni-base superalloys. Materials Chemistry and Physics 81 (2003) 417-423.
  • [12] Szczotok A.: Application of new procedures for a quantitative evaluation of a structure of MAR M247 nickel-base superalloy in precision cast blades. Ph.D. Thesis. The Silesian University of Technology, Katowice, Poland (2007).
  • [13] Young R. A., Sakhivel A., Moss T. S., Paiva-Santos C. O.: DBWS-9411 – an upgrade of the DBWS programs for Rietveld Refinement with PC and mainframe computers. Journal of Applied Crystallography 28 (2008), 366-367.
  • [14] Young R. W., editor: The Rietveld method. IUCr Monograph on Crystallography, Oxford, Oxford Science Publishing (1993).
  • [15] Hill R. J., Howard C. J.: Quantitative phase analysis from neutron powder diffraction data using the Rietveld method. Journal of Applied Crystallography 28 (1987) 467-474.
  • [16] Li R. B., Yao M., Liu W. C., He X. C.: Isolation and determination for δ, γʹ and γ″, phases in Inconel 718 alloy. Scripta Materialia 46 (2002) 635-638.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPL8-0015-0117
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.