Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Ilościowy opis struktury stopu na osnowie fazy międzymetalicznej Fe-Al po odkształceniu plastycznym na gorąco
Konferencja
STERMAT 2008 : VIII International Conference on Stereology and Image Analysis in Materials Sciences (VIII ; 02-06.09.2008 ; Zakopane, Polska)
Języki publikacji
Abstrakty
The presented paper constitutes part of the conducted research on the possibility of forming alloys based on intermetallic phases from the Fe-Al system by thermoplastic processing. Insufficient plasticity, which is an inhibitor of further development of these intermetallics as constructional materials, makes the range of their applications limited. In the paper, an analysis is conducted of the influence of deformation parameters on the structure of an alloy of Fe-38 at. % Al. An axial-symmetric compression test was carried out using a Gleeble 3800 simulator at a temperature from 700°C to 1200°C and at a deformation rate from 0.01 s"1 to 10 s"1. A quantitative evaluation of the structure was made with use of "MET-ILO" application on the basis of images acquired from a light microscope. The obtained research will be used for the development of mathematical models determining the influence of deformation parameters on the alloy structure. Such data are significant for the development of thermo-plastic treatment of for alloys from the FeAl system .
Prezentowana praca stanowi element prowadzonych badań nad możliwością kształtowania stopów na osnowie faz międzymetalicznych z układu Fe-Al drogą obróbki cieplno-plastycznej. Ograniczeniem możliwości szerokiego zastosowania intermetalików z układu Fe-Al, jest ich niedostateczna plastyczność, będąca czynnikiem hamującym ich dalszy rozwój jako materiałów konstrukcyjnych. W artykule analizowano wpływ parametrów odkształcania na strukturę stopu Fe-38% at. Al. Próbę osiowosymetrycznego ściskania wykonano na symulatorze Gleeble 3800 w temperaturze od 700°C do 1200°C i prędkości odkształcenia od 0.01 s"1 do 10 s'1. Ilościową ocenę struktury wykonano z wykorzystaniem programu "MET-ILO" na podstawie obrazów uzyskanych z mikroskopu świetlnego. Uzyskane wyniki badań zostaną wykorzystane do opracowania modeli matematycznych określających wpływ parametrów procesu odkształcenia na strukturę stopu. Dane te są istotne do opracowania obróbki cieplno-plastycznej stopów FeAl.
Wydawca
Czasopismo
Rocznik
Tom
Strony
351--354
Opis fizyczny
Bibliogr. 14 poz., rys., tab.
Twórcy
autor
autor
- Silesian University of Technology, Department of Materials Science, Katowice, dariusz.kuc@polsl.pl
Bibliografia
- [1] Kuc D., Niewielski G., Jabłońska M., Bednarczyk I.: Deformability recrystallization of Fe-Al intermetallic phase-based alloy, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 143-146.
- [2] Kuc D., Niewielski G., Jabłońska M., Bednarczyk I.: The influence of deformation on the plasticity and structure of Fe3Al-5Cr alloy, Journal of Achievements in Materials and Manufacturing Engineering 22 (2007) 27-30.
- [3] Jabłońska M., Rodak K., Niewielski G.: Characterization of the structure of FeAl alloy after hot deformation Journal of Achievements in Materiale and Manufacturing Engineering 18 1-2 (2006) 107-110.
- [4] Stoloff N. S.: Iron aluminides: present status and future, Materiale Science and Engineering A 258 (1998) 1-14.
- [5] Chakraborty P., Sharma I. G., Suri A. K., Bose D. K.: Studies on preparation, characterisation and evaluation of properties of Fe3Al-based intermetallic alloy of composition Fe–16Al–5.44Cr–1Nb–0.5C, Journal of Materials Processing Technology 115 (2001) 413-422.
- [6] Sastry D. H., Prasad Y. V. R. K., Deevi S. C: Influence of temperature and strain rate on the flow stress of an FeAl alloy, Materials Science and Engineering (2001) 157-163.
- [7] Huang D., Yang W. Y., Sun Z. Q., Froyen L.: Preparation and mechanical properties of large-ingot Fe3Al-based alloys, Journal of Materials Processing Technology 146 (2004) 175-180.
- [8] Morris D. G., Muñoz-Morris M. A., Chao J.: Development of high strength, high ductility and high creep resistant iron aluminide, Intermetallics 12 (2004) 82-826.
- [9] Sellars C. M.: Role of computer modeling in thermomechanical processing, Proc. XVth International Conference on Phisical metallurgy and Materials Science, Kraków – Krynica (1998) 100-108.
- [10] Hadasik E.: Plasticity of Metallic Materials, Publisher of Silesian University of Technology, Gliwice (2004) 39-64.
- [11] Kurzydłowski K. J., Ralph B.: The quantitative descripiton of the microstructure of materials, CRC Press (2005).
- [12] Cwajna J., Malinski M., Szala J.: The grain size as the structural criterion of polycrystal quality evaluation, Materials Science and Engineering 4 (1993) 79-88.
- [13] Niewielski G., Kuc D.: Structure and properties of high-alloy steels, In: Hadasik E., editor, Plasticity of Metallic Materials, Publisher of Silesian University of Technology, Gliwice (2004) 199-221.
- [14] Kuc D., Niewielski G., Radawański K.: The structure and plasticity changes in stainless steels after hot-deformation processes, 11th Int. Sc. Conf. Contemporary Achievents in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice–Zakopane (2005) 215-231.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPL8-0006-0064