PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The stabilization of polyethylene with two-component stabilizing system

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Stabilizacja polietylenu dwuskładnikowym układem stabilizującym
Języki publikacji
EN
Abstrakty
EN
The results of investigations of PE-LD stabilization with two-component system consisting of commercial stabilizers: "Irganox 1010" and "Ultranox 626" are presented. The effect of molar ratio of components on the system efficiency has been etermined. Stabilizing system efficiency was estimated on the asis of induction time values (t(i)) of PE-LD oxidation rocess at temp. 210degreesC and 220degreesC. Induction time alues have been determined from DTA measurements. On the basis f interaction coefficient (Theta) values calculated from quation (1) it has been found that the components of chosen tabilizing system show interaction synergism (Theta > 1) which ignificantly depends on molar ratio of the components. The ptimal ratio is equal to 0.5.
PL
Przedstawiono wyniki badań dotyczących stabilizacji PE--LD dwuskładnikowym układem złożonym z handlowych stabilizatorów "Irganox 1010" i "Ultranox 626" (tabela 1). Określono wpływ stosunku składników na skuteczność układu j ocenianą na podstawie wartości czasu indukcji (td procesu utleniania PE-LD w temp. 210°C i 220°C (tabela 2). Czasy te wyznaczano metodą różnicowej analizy termicznej (DTA). Obliczone wg równania (1) wartości współczynnika oddziaływania (0) posłużyły do ustalenia, że składniki badanego układu wykazują synergizm oddziaływania (0>1), który w istotny sposób zależy od stosunku molowego składników (tabela 3). Optymalna wartość tego stosunku wynosi 0,5.
Czasopismo
Rocznik
Strony
713--716
Opis fizyczny
Bibliogr. 21 poz., rys., tab.
Twórcy
autor
  • Institute of Heavy Organic Synthesis, ul. Energetyków 9, 47-225 Kedzierzyn-Koźle, Poland
autor
  • Cracow Universty of Technology, ul. Warszawska 24, 31-155 Kraków, Poland
autor
  • Institute of Heavy Organic Synthesis, ul. Energetyków 9, 47-225 Kedzierzyn-Koźle, Poland
Bibliografia
  • 1. "Developments in polymer stabilization" (Ed. Scott G.), Vol. 7, Applied Science Publishers, London 1984.
  • 2. Waldman W., De Paoli M.: Polym. Degrad. Stab. 1998, 60, 301.
  • 3. Habicher W. D. et al.: Macromol. Symp. 1997 ,115 , 181.
  • 4. "Developments in polymer stabilization" (Ed. Scott G.), Vol. 4, Applied Science Publishers, London 1982.
  • 5. Latocha Cz., Uhniat M., Balcerowiak W.: Polym. Deg Stab. 1984, 7, 189.
  • 6. Decker C., Mayo F. R., Richardson H. J.: ]. Polym. Sci, Polym. Chem. Ed. 1973, 11, 2879.
  • 7. Decker C., Mayo F. R., Richardson H. J.: J. Polym. Sci, Polym. Chem. Ed. 1973, 11, 2848.
  • 8. Ranby B., Rabek Ya. E: "Photodestruction, Photooxidation, Photostabilization of Polymers" (in Russian), Mir, Moscov 1978.
  • 9. "Developments in polymer stabilisation" (Ed. Scott G.), Vol. 1, Applied Science Publishers, Barking 1979.
  • 10. Pospisil J.: Adv. Polym. Sci. 1980, 36, 69.
  • 11. Pospisil J., Klemchuk P. R: "Oxidation Inhibition in Organic Materials", CRC Press, Boca— Raton— Ann Arbor— Boston 1990.
  • 12. Schwetlick K.: Pure Appl. Chem. 1983, 55,1629.
  • 13. Latocha C., Uhniat M.: Polym. Degr. Stab. 1992, 35, 115.
  • 14. Uhniat M., Latocha C.: Polym Degr. Stab. 1992, 35, 163.
  • 15. Howard J. B.: Polym. Eng. Sci. 1973, 13, 429.
  • 16. Marshall J. D. et al.: Polym. Eng. Sci. 1973, 13, 415.
  • 17. Wight F. R.: Polym. Eng. Sci. 1976, 16, 652.
  • 18. Latocha Cz., Uhniat M.: Polimery 1982, 2, 67.
  • 19. Latocha Cz., Uhniat M.: Polym. Degr. Stab. 1989, 23, 193.
  • 20. "Thermal characterization of polymeric materials" (Ed. Turi E.), Second Ed., John Wiley and Sons, New York 1996.
  • 21. Hatekayama T , Quinn F. X.: "Thermal analysis" John Wiley and Sons, Chichester 1994.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPL7-0005-0088
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.