Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Influence of temperature in different regions of glow discharge on phase composition of nitriding layers
Konferencja
Krajowa Konferencja ,,Nowe Materiały - Nowe Technologie w Przemyśle Okrętowym i Maszynowym" (III; 28.05 - 01.06.2006; Międzyzdroje, Polska)
Języki publikacji
Abstrakty
W pracy przedstawiono wyniki badań procesu azotowania żelaza Armco. Materiał ten poddany został azotowaniu jarzeniowemu zarówno na katodzie jak i na podłożu odizolowanym od katody i anody czyli w tzw. potencjale plazmy wyładowania jarzeniowego. Procesy azotowania przeprowadzono na urządzeniu do obróbek jarzeniowych z chłodzoną anodą. Azotowanie jarzeniowe dla elementów umieszczonych na katodzie jak i tzw. „potencjale plazmy” przeprowadzono w dwóch wariantach: proces pierwszy (I): T= 793 K, t = 18 ks, skład atmosfery reaktywnej: 25% N2 - 75% H2, drugi (II): T= 833 K, t = 18 ks, skład atmosfery reaktywnej: 20% N2 - 70% H2 - 10% Ar. Głównym celem pracy było ustalenie wpływu temperatury w różnych obszarach wyładowania jarzeniowego prądu stałego na skład fazowy i własności warstw wierzchnich uzyskanych w wyniku azotowania żelaza Armco.
In this work the results of plasma nitriding process of Armco iron under glow discharge conditions are presented. Nitriding processes were performed by using glow discharge system with water-cooled anode. Two variants of treatment were applied. In first (I) the parameters were as follow: temperature T=793 K, time of treatment t = 18 ks and composition of working atmosphere 25 % N2 and 75 % H2. In the second variant (II) T= 833 K, t= 18 ks and the working atmosphere was 20 % N2, 70 % H2 and 10 % Ar2. Additionally the Armco substrates during plasma nitriding were placed directly on the cathode and on the isolated from cathode and anode substrate, that is at so called potential of glow discharge plasma. The main goal of this work was determination of influence of temperature in different regions of D.C. glow discharge on phase composition and properties of nitriding layers.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
391--394
Opis fizyczny
Bibliogr. 3 poz., rys., tab.
Twórcy
autor
autor
autor
autor
- Politechnika Częstochowska, Instytut Inżynierii Materiałowej, iim@mim.pcz.czest.pl
Bibliografia
- [1] Michalski J., Journal of Materials Science Letters, 19, (2000), 1411-1414.
- [2] Keller K.: Hüart. Tech. Mitt, 26, 1971, (No 2), s. 120-130
- [3] T. Fraczek, J. Michalski, Rola potencjału plazmy w warunkach wyładowania jarzeniowego prądu stałego w procesie azotowania stali EJ96, Inżynieria Materiałowa, , (2002), (Nr 5), 299-301.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPL6-0005-0066