Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Influence of the annealing temperature on the texture development in the austenitic atainless steel with ferrite precipitations
Języki publikacji
Abstrakty
W niniejszej pracy przedstawiono wyniki badań tekstury rekrystalizacji w stali austenitycznej z wydzieleniami ferrytu poddanej walcowaniu na zimno do 80% odkształcenia, którą następnie wyżarzono przy temperaturze 650 - 1000 st. C w czasie 1 - 10 godzin. W ramach badań wykonano analizę fazową oraz pomiar figur biegunowych, na podstawie których obliczono funkcję rozkładu orientacji (FRO). Rozwój tekstury analizowano w warstwie środkowej taśm.
The object of investigations was two - phase steel having the austenitic structure with ferrite precipitations. The material was subjected to cold -rolling up to about 80% of deformation and subsequently annealed within the temperature range 650 degree Celsius - 1000 degree Celsius. The investigations included the phase analysis, measurements of pole fugures and calculations of the orientation distribution functions (ODF s) for austenitic phase. The texture development was analyzed within the centre layers.
Wydawca
Czasopismo
Rocznik
Tom
Strony
366--370
Opis fizyczny
Bibliogr. 6 poz., rys.
Twórcy
autor
- Akademia Górniczo - Hutnicza, Wydział Metalurgii i Inżynierii Materiałowej, Zakład Metaloznawstwa i Metalurgii Proszków; Al. A. Mickiewicza 30, 30-059 Kraków
autor
- Akademia Górniczo - Hutnicza, Wydział Metalurgii i Inżynierii Materiałowej, Zakład Metaloznawstwa i Metalurgii Proszków; Al. A. Mickiewicza 30, 30-059 Kraków
autor
- Akademia Górniczo - Hutnicza, Wydział Metalurgii i Inżynierii Materiałowej, Zakład Metaloznawstwa i Metalurgii Proszków; Al. A. Mickiewicza 30, 30-059 Kraków
Bibliografia
- 1. Donadille C., Yalle R., Penelle R.: Development of texture and microstructure during cold-rolling and annealing of f .c.c. alloys; Example of an austenitic stainless steel, Acta Metallurgica, t. 37, 1989 s. 1547
- 2. Lucke K., Engler O.: Effects of particles development of microstructure and texture during rolling and recrystallisation in FCC alloys, Materials Science and Technology, t. 6, 1990 s. 1113
- 3. Blicharski M., Gorczyca S.: Rekrystalizacja z udziałem drugiej fazy, wyd. Śląsk, 1980
- 4. RatuszekW., Ryś J., Pieniążek J., Kowalska J.: Deyelopment of recrystallization testure in austenitic steel with ferrite precipitates, Archives of Metallurgy, t. 47, 2002 s. 244
- 5. Padilha A. F., Pault R. L., Rios P. R.: Annealing of cold-worked Austenitic Stainless Steels, ISIJ International, vol. 43 2003, No 2, s. 135
- 6. Barcik J.: Procesy wydzielania fazy sigma w chromowo-niklowych stalach austenitycznych, Uniwersytet Śląski, 1974
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPL6-0003-0067