Identyfikatory
Warianty tytułu
Applicattion of the SIO2-TIO2 coatings in dental prosthetics
Języki publikacji
Abstrakty
Przeprowadzono badania przyczepności czterech kombinacji połączeń: Ti/Triceram, Ti/SiO2-TiO2/Triceram, Remanium 2000/Vita Keramik i Remanium 2000/ SiO2-TiO2/Vita Keramik metodą trzypunktowego zginania (wg PN-EN ISO 9693). Powłoki SiO2-TiO2 nanoszone były na tytanowe i kobaltowe podłoże metodą zol-żel. Otrzymane wyniki badań wykazały większą przyczepność połączenia Ti/SiO2-TiO2/Triceram w stosunku do układu połączenia Ti/Triceram bez warstwy przejściowej zol-żel. Zastosowanie powłoki przejściowej zol-żel w przypadku stopu CoCrMoW nie podwyższa wytrzymałości połączenia metal-porcelana, a otrzymane wyniki są zbliżone do rezultatów uzyskiwanych z zastosowaniem tradycyjnych technik przygotowania i napalania dentystycznych koron. Potwierdza to celowość stosowania ceramicznej warstwy pośredniej na podłożu tytanowym.
The bond strength by three-point bending (according to PN-EN ISO 9693) of four combinations Ti /Triceram, Ti/SiO2-TiO2/Triceram, Remanium 2000/Vita Keramik and Remanium 2000/ SiO2-TiO2/Vita Keramik was evaluated. Coatings SiO2-TiO2 on base titanium and cobalt alloy were deposited using sol-gel method. The results showed that the bond strength of Ti/SiO2-TiO2/Triceram and Ti/SiO2/Triceram in control group was significantlyhigher than the Ti/Triceram without intermediate layers sol-gel. Application of SiO2-TiO2 intermediate sol-gel coating on CoCrMoW alloy doesn't increase bond strength of metal-porcelain, and the results obtained are similar to the commercial techniques. The purposefulness of the application of the intermediate ceramic layer on base titanium was been confirmed.
Wydawca
Czasopismo
Rocznik
Tom
Strony
98--106
Opis fizyczny
Bibliogr. 20 poz., rys.
Twórcy
Bibliografia
- 1. Adachi M., Mackert J.R, Parry E.E., Fairhurst C.W.: Oxide adherence and porcelain bonding to titanium and Ti-6Al-4V alloy. Journal of Prosthetic Dentistry, Vol. 69, No. 6, 1990, pp. 1230-1235.
- 2. Bieniaś J., Surowska B., Stoch A., Matraszek H., Walczak M.; The influence of SiO2 and SiO2-TiO2 intermediate coatings on bond strength of titanium and Ti6Al4V alloy to dental porcelain. Dental Materials; 2009, 25, pp. 1128-1135.
- 3. Coeffy J., Anusavice K.J., DeHoff P.H., Lee R.B, Hojjatie B.: Influence of contraction mismatch and cooling on flexural failure of PFM system. Journal of Dental Research, Vol. 67, 1988, pp 61-65.
- 4. Craig R.G. [ed]: Restorative dental materials, 9th ed. St. Louis. Mosby-Year Book, 1993, p. 492.
- 5. Craig R.G.: Restorative dental materials. 11th ed St. Louis. Mosby, 1993.
- 6. Craig R.G., Powers J.M., Wataha J.C., pod red. Limanowskiej-Shaw H.: Materiały stomatologiczne. Wyd. Medyczne Urban & Partner, Wrocław 2000.
- 7. DeHoff P.H., Anusavice K.J.: Viscoelastic stress analysis of thermally compatible and incompatible metal-ceramic system. Dental Materials, Vol. 14, 1998, pp. 237-245.
- 8. Joias R.M. et al.: Shear Bond strength of a ceramic to Co-Cr alloys. The Journal of Prothetics Dentistry, 99, 2008, pp. 54-59.
- 9. Lautenschlager E.P, Monaghan P.: Titanium and titanium alloys as dental materials, International Dental Journal, 43, 1993, pp. 245-253.
- 10. Matraszek H., Stoch A., Brożek A., Długoń E., Paluszkiewicz Cz.: Wykorzystanie metody zol-żel do wzmocnienia w technice dentystycznej i implantoprotetyce. Implantoprotetyka, Nr 4, 2003, 2-5.
- 11. Matraszek H., Stoch A., Paluszkiewicz Cz., Brożek A., Długoń E.: Zastosowanie metody zol-żel w praktyce dentystycznej. Inżynieria Biomateriałów, Nr 23-25, 2002, s. 72-74.
- 12. Michalik R.: Łaskawiec J., Klisch M.: Powłoki ochronne wytwarzane metodą zol-żel na implantach. Inżynieria Materiałowa, Nr 5, 2002, s. 372-375.
- 13. Paluszkiewicz Cz., Stoch A.: FT-IR microscopic imaging of metal-ceramics joint. Vibrational Spectroscopy, Vol. 35, 2004, pp. 183-187.
- 14. Pang I.-Ch., Gilbert J.L., Chai J., Lautenschlager E.P.: Bonding characteristics of lowfusing porcelain bonded to pure titanium and palladium-copper alloy. Journal of Prosthetic Dentistry, Vol. 73, No. 1, 1995, pp. 17-25.
- 15. PN-EN ISO 9693:2002: Ceramika dentystyczna do napalania na metalowe materiały. Polski Komitet Normalizacyjny, Warszawa 2002, Metal-ceramic dental restorative systems, 2nd ed. Switzerland, International Organization for Standardization, ISO 9693:1999.
- 16. Setz J., Schwickerath H.: Aspekty materiałoznawstwa, w: Koecka B. i in.: Protetyka stomatologiczna. Korony i mosty, tłumaczenie Maślanka T.: Wydawnictwo Medyczne Urban&Partner Wrocław 2000.
- 17. Surowska B., Bieniaś J., Walczak M., Sangwal K., Stoch A.: Microstructure and mechanical properties of ceramic coatings on Ti and Ti –based alloy. Applied Surface Science, 238, 2004, pp. 288-294.
- 18. Tsetsekou A., Papadopoulos T., Adamopoulos O.: Microstructure effect on the properties of a commercial low-fusing dental porcelain. Journal of Materials Science: Materials in Medicine, Vol. 13, No. 4, 2002, pp. 407-416.
- 19. Walter M., Böning K., Reppel P.: Clinical Performance of machined titanium restorations. Journal of Dentistry, 22, 1994, p.346.
- 20. Zinelis S., Tsetekou A., Papadopoulos T.: Thermal expansion and microstructural analysis of experimental metal-ceramic titanium alloys. Journal of Prosthetic Dentistry, 90, 2003, pp. 332-338.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPL2-0025-0099