Modelling the influence of fuel composition on solid oxide fuel cell by using the advanced mathematical model

• Autorzy: Milewski J. , Badyda K. , Miller A.

Warianty tytułu

PL

Modelowanie wpływu składu paliwa na osiągi tlenkowego ogniwa paliwowego przy wykorzystaniu zaawansowango modelu

• Języki publikacji: EN

Abstrakty

EN

The advanced mathematical model of Solid Oxide Fuel Cell (SOFC) is presented. The governing equations of the model are presented and described. Based on the model the influence of fuel composition on SOFC performance is shown. Hydrogen is used as reference fuel.

PL

Przedstawiono zaawansowany model matematyczny tlenkowego ogniwa paliwowego. Przedstawiono i omówiono główne założenia modelu oraz rządzące nim zależności. W oparciu o model zbadano wpływ składu paliwa na osiągi ogniwa przyjmując wodór jako paliwo referencyjne.

Słowa kluczowe

EN

fuel cell; solid oxide fuel cell; mathematical modelling

PL

ogniwa paliwowe; tlenkowe ogniwa paliwowe; modelowanie matematyczne

• Wydawca: KAPRINT
• Czasopismo: Rynek Energii
• Rocznik: 2010
• Tom: nr 3
• Strony: 159--163
• Opis fizyczny: Bibliogr. 15 poz., fig., tab.

Twórcy

autor

Milewski J.

autor

Badyda K.

autor

Miller A.

• Wydział Mechaniczny Energetyki i Lotnictwa Politechniki Warszawskiej

Bibliografia

• [1] HYSYS.Plant 2.1 user guide. Hyprotech Corporation 1999
• [2] Budzianowski W. M.: Role of catalytic technologies in combustion of gaseous fuels. Rynek Energii 2009, 82
• [3] Cai Z., Lan T. N., Wang S., Dokiya M.: Supported Zr(Sc)O2 SOFCs for reduced temperature prepared by slurry coating and co-firing. Solid State Ionics 2002, 152-153
• [4] Ding J., Liu J.: An anode-supported solid oxide fuel cell with spray-coated yttria-stabilized zirconia (YSZ) electrolyte film. Solid State Ionics 2008, 179
• [5] Ishihara T., Shibayama T., Honda M., Nishiguchi H., Takita Y.: Solid oxide fuel cell using Co doped La(Sr)Ga(Mg)O3 perovskite oxide with notably high power density at intermediate temperature. Chemical communications 1999, 13
• [6] Jiang Y., Virkar A. V.: Fuel composition and diluent effect on gas transport and performance of anode-supported SOFCs. Journal of The Electrochemistry Society 2003, 150
• [7] Kakaç S., Pramuanjaroenkij A., Zhou X. Y.: A review of numerical modeling of solid oxide fuel cells. International Journal of Hydrogen Energy 2007, 32
• [8] Madsen B., Barnett S.: Effect of fuel composition on the performance of ceramic-based solid oxide fuel cell anodes. Solid State Ionics 2005, 176
• [9] Milewski J., Miller A.: Influences of The Type and Thickness of Electrolyte on Solid Oxide Fuel Cell Hybrid System Performance. Journal of Fuel Cell Science and Technology 2006, 3
• [10] Park H. C., A.V. V.: Bimetallic (Ni-Fe) anode-supported solid oxide fuel cells with gadolinia-doped ceria electrolyte. Journal of Power Sources 2009, 186
• [11] Virkar A.: Theoretical analysis of the role of interfaces in transport through oxygen ion and electron conducting membranes. Journal of Power Sources 2005, 147
• [12] Yao Z., Chunming Z., Ran R., Cai R., Shao Z., Farrusseng D.: A new symmetric solid-oxide fuel cell with La0.8Sr0.2Sc0.2Mn0.8O3-δ perovskite oxide as both the anode and cathode. Acta Materialia 2009, 57
• [13] Young D., Sukeshini A. M., Cummins R., Xiao H., Rottmayer M., Reitz T.: Ink-jet printing of electrolyte and anode functional layer for solid oxide fuel cells. Journal of Power Sources 2008, 184
• [14] Zhao F., Virkar A.: Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters. Journal of Power Sources 2005, 141
• [15] Zhou W., Shi H., Ran R., Cai R., Shao Z., Jin W.: Fabrication of an anode-supported yttria-stabilized zirconia thin film for solid-oxide fuel cells via wet powder spraying. Journal of Power Sources 2008, 184