XPS measurements of passive film formed on AISI 316L SS after electropolishing in a magnetic field (MEP)

• Autorzy: Rokosz K. , Hryniewicz T.
• Języki publikacji: EN

Abstrakty

EN

Electrochemical polishing of metals and alloys is one of the most currently used finishing treatments, covering metallic biomaterials with complicated shapes (coronary stents, prostheses, etc.). A standard electropolishing (EP) process has been recently modified by including a magnetic field, and called the magnetoelectropolishing (MEP). Many surface properties and even mechanical features may be modified and improved by MEP. The changes are concerned with the surface film composition which undergo a modification. For the present studies, X-ray Photoelectron Spectroscopy (XPS) analysis was applied to measure the surface film composition on AISI 316L stainless steel. In conclusion both Cr-X/Fe-X compounds ratio as well as Cr/Fe total ratio of the 316L steel after EP and MEP were calculated and compared to reveal the advantage of the magnetic field used.

Słowa kluczowe

EN

316L SS; XPS results; magnetoelectropolishing

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2012
• Tom: Vol. 12, nr 4(34)
• Strony: 13--22
• Opis fizyczny: Bibliogr. 27 poz., rys., tab.

Twórcy

autor

Rokosz K.

autor

Hryniewicz T.

• Koszalin University of Technology, Division of Surface Electrochemistry and Engineering, Faculty of Mechanical Engineering, Racławicka 15-17, 75-620 Koszalin, Poland,

Bibliografia

• 1. Dettner P., Electrolytic and Chemical Polishing of Metals, Ordentlich Publishers 2nd Printing, Express-SDAR Ltd., Needar Press, Tel Aviv, May 1988 (340 pages).
• 2. T. Hryniewicz, Concept of microsmoothing in electropolishing process, Surface & Coatings Technology, 64(2) (1994) 75-80.
• 3. T. Hryniewicz T., R. Rokicki R., K. Rokosz, Magnetoelectropolishing Process Improves Characteristics of Finished Metal Surfaces, Metal Finishing, 104(12) (2006) 26-33.
• 4. T. Hryniewicz, Wstęp do obróbki powierzchniowej biomateriałów metalowych (On the surface treatment of metallic biomaterials), book ed. by Politechnika Koszalińska, Koszalin, 2007, (155 pages).
• 5. R. Rokicki R., T. Hryniewicz, Enhanced oxidation-dissolution theory of electropolishing, Trans. Inst. Met. Finish., 90(4) (2012) 188-196.
• 6. K. Fushimi, M. Startmann, A. Hassel, Electropolishing of NiTi shape memory alloys in methanolic H2SO4. Electrochim. Acta, 52 (2006) 1290–1295.
• 7. W. Wu, X. Liu, H. Han, D. Yang, S. Lu, Electropolishing of NiTi for improving biocompatibility. J. Mater. Sci. Technol., 24(6) (2008) 926-939.
• 8. C. Praisarnti, J.W.W. Chang, G.S.P. Cheung, Electropolishing enhances the resistance of nickel-titanium rotary files to corrosion fatigue failure in hypochlorite. J. Endod. 36 (2010) 264–2677.
• 9. T. Hryniewicz, R. Rokicki, K. Rokosz, Magnetoelectropolishing for metal surface modification, Trans. Inst. Met. Finish., 85(6) (2007) 325-332.
• 10. K. Rokosz, Polerowanie elektrochemiczne stali w polu magnetycznym, (Electrochemical polishing of steels in magnetic field, Copyright by Politechnika Koszalinska, Koszalin, 2012.
• 11. R. Rokicki, Apparatus and method for enhancing electropolishing utilizing magnetic fields, US Patent 7632390 issued on December 15, 2009
• 12. T. Hryniewicz T., R. Rokicki R., K. Rokosz K., Corrosion Characteristics of Medical Grade AISI 316L Stainless Steel Surface after Electropolishing in a Magnetic Field, The Journal of Corrosion Science and Engineering (Bob Cottis), 10 (2007) 1-10.
• 13. T. Hryniewicz T., R. Rokicki, K. Rokosz, Surface characterization of AISI 316L biomaterials obtained by electropolishing in a magnetic field, Surface & Coatings Technology, 202(9) (2008) 1668-1673.
• 14. T. Hryniewicz, K. Rokosz, R. Rokicki, Electrochemical and XPS Studies of AISI 316L stainless Steel after Electropolishing in a Magnetic Field, Corrosion Science, 50(9) (2008) 2676-2681.
• 15. T. Hryniewicz, R. Rokicki, K. Rokosz, Corrosion Characteristics of Medical-Grade AISI Type 316L Stainless Steel Surface After Electropolishing in Magnetic Field, Corrosion, (The Journal of Science and Engineering), Corrosion Science Section, 64(8) (2008) 660-665.
• 16. T. Hryniewicz, K. Rokosz and M. Filippi, Biomaterial Studies on AISI 316L Stainless Steel after Magnetoelectropolishing, Materials 2 (2009) 129-145;
• 17. T. Hryniewicz, K. Rokosz, Analysis of XPS results of AISI 316L SS electropolished and magnetoelectropolished at varying conditions, Surface and Coatings Technology, 204(16-17) (2010) 2583-2592.
• 18. T. Hryniewicz, K. Rokosz, Polarization characteristics of magnetoelectropolishing stainless steels, Materials Chemistry and Physics, 122 (2010) 169-174.
• 19. T. Hryniewicz, K. Rokosz, Investigation of selective properties of AISI 316L SS after magnetoelectropolishing, Materials Chemistry and Physics, 123 (2010) 47-55.
• 20. T. Hryniewicz, P. Konarski, K. Rokosz, R. Rokicki, SIMS analysis of hydrogen content in near surface layers of AISI 316L SS after electrolytic polishing under different conditions, Surface and Coatings Technology, 205 (2011) 4228–4236;
• 21. K. Rokosz, T. Hryniewicz, S. Raaen, Characterization of Passive Film Formed on AISI 316L Stainless Steel after Magnetoelectropolishing in a Broad Range of Polarization Parameters, Steel Research International, 2012, http://onlinelibrary.wiley.com/doi/10.1002/srin.201200046/abstract
• 22. Information on http://www.casaxps.com
• 23. A.P., Grosvenor, B.A., Kobe, M.C., Biesinger, N.S McIntyre, Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds, Surface and Interface Analysis, 36(12) (2004) 1564–1574.
• 24. M.C. Biesinger, C. Brown, J.R. Mycroft, R.D. Davidson, N.S. McIntyre, X-ray photoelectron spectroscopy studies of chromium compounds, Surface and Interface Analysis, 36(12) (2004) 1550-1563.
• 25. B.V. Crist, Handbook of monochromatic XPS spectras, The elements and native oxides, John Wiley & Sons, Ltd., 2000.
• 26. Information on http://www.xpsfitting.com
• 27. Information on http://srdata.nist.gov/xps