Evaluation of the selected factors effect on the fatigue life of specimens with sized and riveted hole Part 1. Design of experiment and test results

• Autorzy: Lipski A.
• Języki publikacji: EN

Abstrakty

EN

Evaluation of the fatigue load, the rivet squeezing force, the velocity of rivet close up and the hole diameter before sizing (after drilling) effect on the fatigue life of specimens with sized and riveted hole was presented in this paper. The work contains two parts. Design of experiment and the results of the fatigue tests performed by the described experiment plan was presented in the first part. The statistical analyses and examples of using the mathematical model of the experimental unit were presented in the second part.

Słowa kluczowe

EN

riveted joints; fatigue life; rivet hole sizing; design of experiment

• Wydawca: Faculty of Ocean Engineering and Ship Technology, Gdańsk University of Technology
• Czasopismo: Journal of Polish CIMAC
• Rocznik: 2012
• Tom: Vol. 7, no 3
• Strony: 135--143
• Opis fizyczny: Bibliogr. 7 poz., tab.

Twórcy

autor

Lipski A.

• University of Technology and Life Sciences in Bydgoszcz Faculty of Mechanical Engineering Al. Prof. S. Kaliskiego 7, 85-789 Bydgoszcz, Poland tel.: [phone], fax: [phone],

Bibliografia

• [1] Jachimowicz J., Szymczyk E., Sławiński G., Analiza wpływu technologii nitowania na stan przemieszczeń, odkształceń i naprężeń wokół nitu, Mechanik Nr 4/2008, ss. 332-337.
• [2] Klonecki W., Statystyka dla inżynierów, PWN, Warszawa 1999.
• [3] Korzyński M., Metodyka eksperymentu, WNT, Warszawa 2006.
• [4] Kukiełka L., Podstawy badań inżynierskich, PWN, Warszawa 2002.
• [5] Lipski A., Mroziński S., Lis Z., Evaluation of the rivet hole sizing degree effect on the fatigue life, Journal of Polish CIMAC, Vol. 6, No. 3, 2011, pp. 119-125.
• [6] Polański Z., Planowanie doświadczeń w technice, PWN, Warszawa 1984.
• [7] Norma branżowa BN-70/1121-03 Nity lotnicze ze łbem kulistym.