Analysis of directional distribution of vibrations generated by the combustion engine

• Autorzy: Burdzik R. , Czech P. , Konieczny Ł. , Wojnar G.
• Języki publikacji: EN

Abstrakty

EN

The article provides a discussion on the studies and analysis of directional distribution of vibrations generated by the combustion engine. The engine is one of the sources of the vibrations in vehicles. The analysis of the vibration propagation from source should take into account the directions of the propagation and the dynamics of the vibration. The experiment was conducted on the vehicles combustion engine and the orthogonal axes vibrations were measured. Analysis of the results allows comparing the values and frequencies of the vibration propagation.

Słowa kluczowe

EN

engine vibration; directional distribution of the vibration

• Wydawca: Faculty of Ocean Engineering and Ship Technology, Gdańsk University of Technology
• Czasopismo: Journal of Polish CIMAC
• Rocznik: 2012
• Tom: Vol. 7, no 1
• Strony: 27--32
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Burdzik R.

autor

Czech P.

autor

Konieczny Ł.

autor

Wojnar G.

• Silesian University of Technology ul. Krasi..skiego 8, 40-019 Katowice, Poland tel.: [phone], fax: [phone],

Bibliografia

• [1] Burdzik, R., The research of vibration of vehicle floor panel, Silesian University of Technology Scientific Papers, s. Transport 67, pp. 23-30, Gliwice: Silesian University of Technology Academic Press, 2010.
• [2] Burdzik, R., Stanik, Z., Warczek J., Method of assessing the impact of material properties on the propagation of vibrations excited with a single force impulse, Archives of Materials and Metallurgy vol. 57 issue 2, pp. 409-416, 2012.
• [3] Burdzik, R., Węgrzyn, T., Effect of Mn and Mo on the quality of welding trucks steel supporting structures, Journal of Achievements in Materials and Manufacturing Engineering JAMME, 43(1), pp. 276-279, 2010.
• [4] Czech, P., Łazarz, B., Madej, H., Wojnar, G., Vibration diagnosis of car motor engines, Acta Tech. t. 3 fasc. 1, pp. 37-42, Corviniensis - Bull. Eng. 2010.
• [5] Jamro, E., Wielgosz, M., Bieniasz, S., Cioch, W., FPGA – ARM heterogeneous system for high speed signal analysis, Solid State Phenomena, vol. 180, pp. 207—213, 2012.
• [6] Madej H., Wykorzystanie analizy modalnej w diagnostyce WA silników spalinowych, Zeszyty Naukowe Politechniki Śląskiej, s. Transport, z. 63, pp.61-68, Gliwice 2006.
• [7] Oleksiak, B., Siwiec, G., Blacha, A., Lipart, J., Influence of iron on the surface tension of copper, Archives of Materials Science and Engineering 44 (1), pp. 39-42, 2010.
• [8] Piecha, J., Węgrzyn, T. Ed., Transactions on Transport Systems, Telematics and Safety, [in:] Burdzik, R., Research of the vibration in 3 axes of car body for different idle gear rotational speed, pp. 203-214, Gliwice: Silesian University of Technology Academic Press, 2011.
• [9] Wong, J.Y., Theory of ground vehicle, 3rd Edition, Wiley, USA, NewYork 2001.
• [10] Xua, Y.L., Guo, W.H., Effects of bridge motion and crosswind on ride comfort of road vehicles, Journal of Wind Engineering and Industrial Aerodynamics 92, 2004.