PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Treatment of the Processing Wastewaters Containing Heavy Metals with the Method Based on Flotation

Autorzy
Identyfikatory
Warianty tytułu
PL
Oczyszczanie ścieków technologicznych z metali ciężkich metodą wykorzystującą flotację
Języki publikacji
EN
Abstrakty
EN
The aim of the studies carried out at full technological scale was to indicate optimal systems of the two-stage precipitation and coagulation (PIX 113 - SAX 18, PAX XL1 - SAX 18, ALCAT 102 - lime milk and SAX 18 - PAX 16) in the process of eliminating heavy metals from wastewaters made in the processing plant producing sub-systems for domestic appliances. Precipitated pollutions were thickened by flocculation and separated by hydrogen peroxide enhanced pressure flotation. The experimental installation of maximal flow capacity: 10.0 m3/d consisted of: the storage-equalization tank, the processing pipe reactor, the pressure flotation station, and the reagent preparation and dosing station. Optimal doses of reagents and a flocculent as well as pressure and saturation time were defined for which maximal reductions in the load of heavy metals were achieved. The usefulness of hydrogen peroxide as a means of enhancing flotation was tested. The use of two-stage precipitation permitted the reduction in heavy metals (Cd, Cu, Cr, Ni, Sn, Zn), eg by applying ALCAT 102 - lime milk at the level exceeding 80%.
PL
Przeprowadzono badania w pełnej skali technologicznej, mające na celu wytypowanie optymalnych układów dwustopniowego strącania i koagulacji (PIX 113 - SAX 18, PAX XL1 - SAX 18, ALCAT 102 - mleko wapienne i SAX 18 - PAX 16) w procesie usuwania metali ciężkich ze ścieków z linii wytwarzania podzespołów do sprzętu gospodarstwa domowego. Wytrącone zanieczyszczenia zagęszczano flokulacyjnie i wydzielano techniką flotacji ciśnieniowej wspomaganej nadtlenkiem wodoru. Instalacja doświadczalna o maksymalnej przepustowości 10,0 m3/d składała się z ziemnego zbiornika gazynująco-uśredniającego, rurowego reaktora procesowego, stacji flotacji ciśnieniowej oraz stacji przygotowania i dozowania reagentów. Wyznaczono optymalne dawki reagentów oraz flokulantu, a także ciśnienia i czasu saturacji, dla których zachodziły maksymalne redukcje ładunku metali ciężkich. Sprawdzono przydatność nadtlenku wodoru w procesie wspomagania flotacji. Zastosowanie dwustopniowego strącania pozwoliło na uzyskanie redukcji metali ciężkich (Cd, Cu, Cr, Ni, Sn, Zn) np. za pomocą układu ALCAT 102 - mleko wapienne na poziomie przekraczającym 80%.
Rocznik
Strony
433--438
Opis fizyczny
Bibliogr. 22 poz., rys., tab.
Twórcy
autor
  • Department of Chemical Technology and Engineering, University of Technology and Life Sciences, ul. Seminaryjna 3, 85-326 Bydgoszcz, Poland, phone +48 52 374 90 37, zak@utp.edu.pl
Bibliografia
  • [1] Kong IC, Bitton G, Koopman B, Jung KH. Heavy metal toxicity testing in environmental samples. Rev Environ Contam Toxicol. 1995;142(3):119-147.
  • [2] Rüffer H, Rosenwinkel KH. Taschenbuch der Industrieabwasserreinigung. München Wien: Oldenbourg Verlag, 1991:503-530.
  • [3] Tünay O, Kabdasli NI, Tasli R. Pretreatment of complexed metal wastewaters. Water Sci Technol. 1994;29(9):265-274.
  • [4] Lesmana SO, Febriana N, Soetaredjo FE, Sunarso J, Ismadji S. Studies on potential applications of biomass for the separation of heavy metals from water and wastewater. Biochem Eng J. 2009;44(1):19-41.
  • [5] Sud D, Mahajan G, Kaur M. Agricultural waste materials as potential adsorbent for sequestering heavy metal ions from aqueous solutions - A review. Biores Technol. 2008;99(14):6017-6027.
  • [6] Ahluwalia SS, Goyal D. Microbial and plant derived biomass for removal of heavy metals from wastewater. Biores Technol. 2007;98(12):2243-2257.
  • [7] Kiptoo JK, Ngila JC, Sawula GM. Speciation studies of nickel and chromium in wastewater from an electroplating plant. Talanta. 2004;64(1):54-59.
  • [8] Barakat MA. New trends in removing heavy metals from industrial wastewater. Arab J Chem. 2011;4(4):361-377.
  • [9] Fenglian F, Qi W. Removal of heavy metal ions from wastewaters: A review. J Environ Manage. 2011;92(3):407-418.
  • [10] Kurniawan TA, Chan GYS, Lo WH, Babel S. Physico-chemical treatment techniques for wastewater laden with heavy metals. Chem Eng J. 2006;118(1-2):83-98.
  • [11] Al Aji B, Yavuz Y, Koparal AS. Electrocoagulation of heavy metals containing model wastewater using monopolar iron electrodes. Sep Purif Technol. 2012;86:248-254.
  • [12] Rubio J, Souza ML, Smith RW. Overview of flotation as a wastewater treatment technique. Mineral Eng. 2002;15(3):139-155.
  • [13] Peleka EN, Lazaridis NK, Matis KA. A hybrid flotation: Microfiltration cell for effluent treatment. Int J Environ Waste Manage. 2011;8(3-4):273-285.
  • [14] Zamboulis D, Pataroudi SI, Zouboulis AI, Matis KA. The application of sorptive flotation for the removal of metal ions. Desalination. 2004;162(1-3):159-168.
  • [15] Santander M, Valderrama L, Guevara M, Rubio J. Adsorbing colloidal flotation removing metals ions in a modified jet cell. Mineral Eng. 2011;24(9):1010-1015.
  • [16] http://www.kemipol.com.pl/products
  • [17] Kang YW, Cho MJ, Hwang KY. Correction of hydrogen peroxide interference on standard chemical oxygen demand test. Water Res. 1999;33(5):1247-1251.
  • [18] Żak S. Problem of correction of the chemical oxygen demand values determined in wastewaters treated by methods with hydrogen peroxide. Proc ECOpole. 2008;2(2):409-414.
  • [19] Talinli I, Anderson GK. Interference of hydrogen peroxide on the standard COD test. Water Res. 1992;26(1):107-110.
  • [20] Nurchi VM, Villaescusa I. Sorption of toxic metal ions by solid sorbents: a predictive speciation approach based on complex formation constants in aqueous solution. Coord Chem Rev. 2012;256(1-2):212-221.
  • [21] Charerntanyarak L. Heavy metals removal by chemical coagulation and precipitation. Water Sci Technol. 1999;39(10-11):135-138.
  • [22] http://h2o2.com/industrial/applications.aspx?pid=102&name=Iron-Metals-Removal-with-Hydrogen-Peroxide
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPG8-0076-0012
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.